• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2012년도 한국컴퓨터종합학술대회논문집 Vol.39 No.1(B)
• /
• pp.414-416
• /
• 2012

고차 주성분 방법으로는 텐서 분석이 있었다. Electroencephalography(EEG) 데이터나 Social Network 데이터에 텐서 분석이 적용되어 주요한 성분들을 찾는 연구들이 있었다. 그러나 텐서 분석은 직관적으로 이해하기에 어려움이 있으며 중요한 노드를 찾는데에는 다소 어려움이 있다. 본 논문에서는 고차 하이퍼에지로 이차원 행렬을 만들고 주성분분석법을 이용하여 중요한 노드를 찾는 새로운 방법론을 제시한다. 데이터로는 Multimodal Memory Game(MMG) 수행시 촬영한 EEG 데이터를 사용하였다. MMG는 TV 드라마 기반의 기억인출게임이다. 베타파의 Power Spectrum Density(PSD)는 각 위치의 채널들의 활성도를 나타내는 지표이다. 우리는 Random Sampling을 바탕으로 PSD 상위 50%의 채널들간의 전이행렬을 구하였다. 그 후 고유치와 고유벡터를 구하였다. 가장 큰 고유치의 고유벡터는 주성분을 나타내며 고유벡터의 각 원소들은 중요도를 나타내는 centrality 이다. 세 명의 피험자에 대한 centrality 상위 30개의 중요한 채널들을 구하였고 세명에 공통적으로 포함되는 채널을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.326-331
• /
• 2006

The durability of recent motors is longer than the past one because there are the rapid technique development of the automobile industry and the vehicle maintenance of users. And then the importance of the durability test due to vibration is increased from day to day. So full vehicle and parts companies accomplish the durability test using various methods. The most public test method among them is the reliable field test but it bring on higher cost and period of the development process. The durability test using MAST(multi axis simulation table) is a solution in order to improve the development process of automobiles. Generally its excitation source uses the optimized road profiles that are obtained by the road test of belgian road, country road, cobbleston road and so on instead of a real field but the interrelations and influences accordingly vehicle damage are considered by a field test between specific roads and real fields in the first place. Therefore this study, in order to accomplish a basic research for the durability test using the MAST, performed on the real field driving test at various domestic roads and the results which are analyzed by PSD(power spectrum density) are compared with relative sensitivity among the roads. Consequently they can present a basic material for generation of road profiles which is applied to the durability test using MAST.

• 한국정보통신학회논문지
• /
• 제7권8호
• /
• pp.1612-1620
• /
• 2003

본 논문에서는 GaAsFET 전력증폭기를 다중반송 통신시스템에서 적용시키고자 설계한 PA증폭기의 측정된 전달함수를 비선형 모델링 한 결과를 제시하였으며 모델링 한 결과를 가지고 설계한 RF 증폭기의 AM­AM 및 AM­PM 비선형 특성을 추정하였다. 추정된 비선형특성 의하여 다중반송전송시스템에서의 증폭기의 근접채널간섭특성(ACPR), QPSK 및 64­QAM과 같은 디지털 변조 신호에 대하여 성상도에서의 데이터 오차벡터의 크기(EVM) 및 BER 관계를 분석하였다. 본 연구에서 제시한 RF GaAs FET의 비선형 모델링은 OFDM을 이용하는 무선 다중반송전송시스템 설계에 적용할 수 있으며 전력증폭기와 디지털 변조 신호에 따른 비선형 관계를 정확하게 추정할 수 있다.

• 한국군사과학기술학회지
• /
• 제12권3호
• /
• pp.266-271
• /
• 2009

Electronic equipments and a missile carried by heavy trucks are often subjected to vibration and shock excitation during their transportation. Electronic equipments are so vulnerable to vibration and shock input that it is necessary to know in advance the vibration level of the truck which cause the damage of equipments. Road tests of a heavy truck carrying a canister on different road conditions such as paved road, unpaved road, and washboard are performed and the effect of road conditions on the vibration characteristics are analyzed. Vibration levels were measured at various locations of the truck along the path through which vibration was transmitted. This study reveals that the velocity of the truck as well as the road surface conditions are main factors which affect the vibration levels of the truck. The power spectrum density of the measured vibration signal and the factors affecting the PSD are also analyzed in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.543-543
• /
• 2000

A new method for HRV(heart rate variability) detection from the R-wave signal, based on the IPFM(integral pulse frequency modulation) model and its similarity to pulse position modulation, is presented. The proposed method exert lowpass filtering with a Kaiser window. In this paper, The proposed method presents a powerful, but simple, tool for investigation of HRV. It also guarantees real-time behavior. simplicity in design, and phase linearity. Even without the basic assumption of IPFM model. the new algorithm can still be used on-line and with higher performance. It is thoroughly proved that lowpass filtering is an ideal method for PSD(Power Spectrum Density) analysis of HRV.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.9-18
• /
• 2008

줄눈 콘크리트포장(JCP-Jointed Concrete Pavement)의 경우 포장단면 온 습도차에 의해 슬래브 내의 컬링이 발생하게 된다. 컬링에 의해서 발생하는 슬래브의 휨 형상 및 크기는 포장내 응력 및 평탄성에 영향을 미치기 때문에 포장의 구조적, 기능적 성능에 중요한 영향을 줄 수 있다. 슬래브의 휨 형상을 직접 측정하는 것은 시공초기에 포장내에 다량의 계측기를 매설하여야 하며, 시공초기부터 거동의 정교한 측정이 필요하고 고가의 실험비용 및 기술적 인 어려움을 갖고 있다. 본 연구에서는 현장에서 손쉽게 획득할 수 있는 프로파일 데이터(Profile Data)에 파워 스펙트럼 분석(Power Spectrum Density Analysis) 및 역 푸리에 변환(Inverse Fast Fourier Transform) 기법 등을 적용하여 임의의 시간에서 줄눈 콘크리트포장의 슬래브 휨 형상을 측정하는 방법을 개발하였다. 개발한 기법의 실효성을 검증하기 위하여 국내 중부내륙에 위치한 시험도로 줄눈 콘크리트 포장에서 시간대별 프로파일을 측정하고 이 데이터로부터 슬래브 휨 형상을 도출하여 그 결과를 검토하였다. 또한 동 시간대의 연속철근 콘크리트포장(CRCP- Continuous Reinforced concrete Pavement) 구간에서의 프로파일 데이터를 분석하고 이를 줄눈 콘크리트포장에서의 결과와 비교하여 개발한 슬래브 휨 형상 추출기법의 타당성을 검증하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.67-74
• /
• 2001

This paper presents the Safe Shutdown Earthquake(SSE) input motion for the seismic design of the Advanced Power Reactor 1400(APR1400). The Design Ground Response Spectra(DGRS) far the SSE is based on the design spectrum specified in regulatory Guide(RG) 1.60 of U.S. Nuclear Regulatory Commission(US NRC), anchored to a Peak Ground Acceleration(PGA) of 0.3g and enriched in the high frequency range. This SSE seismic input motion is to be applied to the seismic analysis as the free-field seismic motion at the ground surface of both the rock and generic soil sites fur APRI1400. The enrichment for APR1400 seismic input motion is performed considering the current US NRC regulations, the seismic hazard studies performed by the Lawrence Livermore National Laboratory (LINL) and Electric Power Research Institute(EPRI) for the Central and Eastern United States nuclear power plant sites, and the seismic input motions used in the design certifications of the three existing U.S. advanced standard plants. It is represented by a set of DGRS and the accompanying Target Power Spectral Density(PSD) Function in both the horizontal and vertical directions.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.1999-2010
• /
• 2023

Undesirable flapping motion of discs can cause the failure of swing check valves in nuclear passive safety systems. Time-resolved particle image velocimetry (PIV) was employed to investigate the flow characteristics around a free-to-rotate plate and the motion response, with the Reynolds numbers, based on the hydraulic diameter of the channel, from 1.32 × 10⁴ to 3.95 × 10⁴. Appreciable flapping motion (±3.52°) appeared at the Reynolds number of 2.6 × 10⁴ with the frequency of 5.08 Hz. In the low-Reynolds-number case, the plate showed negligible flapping. In the high-Reynolds-number case, the deflection angle increased with reduced flapping amplitude. The torque from the fluid determined the flapping amplitude. In the low-Reynolds-number case, Karman vortices were absent. With increasing Reynolds numbers, Karman vortices developed behind the plate with larger deflection angles. Strong interaction between the wake flow from the leading and trailing edge of the plate was observed. Based on power spectrum density (PSD) analysis, the vortex shedding frequency coincided with the flapping frequency, and the amplitude was positively correlated to the strength of the vortices. Proper orthogonal decomposition (POD) modes evince that, in the case of appreciable motion, coherent structures exhibited a larger spatial scale, enhancing the magnitude of the external torque on the plate.

• 한국운동역학회지
• /
• 제17권1호
• /
• pp.129-134
• /
• 2007

The purpose of this study was to determine the variability of components of the vertical ground reaction force signal to seek the suitable number of attempt datum to be analyzed during running at 2m/s and 4m/s. For this study, six subjects (height mean:$174.5{\pm}4.4cm$, weight $671.5{\pm}116.4N.$, age:$25.0{\pm}yrs.$) were selected and asked to run at least 3 times each run condition randomly. FFT(fast Fourier transform) was used to analyze the frequency domain analysis of the vertical ground reaction forces signal and an accumulated PSD (power spectrum density) was calculated to reconstruct the certain signal. To examine the deviation of the vertical ground reaction between signals collected from an different number of attempt, variability of frequency, magnitude of passive peak, time up to the passive peak and maximum load rate were determined in a coefficient of variance. The variability analysis revealed that when analyze the vertical reaction force components at 2m/s speed running, which belongs to slow pace relatively, it would be good to calculate these components from signal of one attempt, but 4m/s speed running needs data collected from two attempts to decrease the deviation of signal between attempts. In summary, when analyzing the frequency and passive peak of the vertical reaction force signal during the fast run, it should be considered the number of attempt.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.376-381
• /
• 2003

This study is focused on the dynamic response of curved bridge when the rubber tired AGT vehicles is running with alternative articulations. For the analytic approach, there is necessary for the three dimensional vehicle model with 11 degree of freedom and the three dimensional curved bridge model by means of finite element method. It can be described by conventional Lagrangian formula with respect to the dynamic interactions between vehicles and its met bridge. The formula is implemented by Fortran language on the simulation program designated BADIA II(Bridge-AGT Dynamic Interaction Analysis II). The solutions of the formula are derived by Newmark- ${\beta}$ method. The BADIA II is for the dynamic interactions between vehicle and curved bridge in terms of the roughness of running surface and guide rail. The applicability of the BADIA II is verified in terms of displacement and modal frequency. This study is described that the dynamic interactive behaviors between the rubber tired AGT vehicle and curved bridge in terms of the radius of curvatures of curved bridge, vehicle articulations, vehicle speeds, vehicle weights, flatness of running surface and roughness of guide rail using BADIA II.