• Korean Journal of Food Science and Technology
• /
• v.26 no.2
• /
• pp.123-126
• /
• 1994

Changes in lipid components of pollack meat during sun-drying and effects of NaCl on lipid oxidation were examined. TBA values and peroxide values of sun dried pollack(SD), salted and sun dried pollack (SS) were 0.142 and 14.8 meq/kg, 0.226 and 20.0 meq/kg after sun-drying, respectively. Raw pollack contained 6.12% total lipid consisted of 2.42% neutral lipid(NL) and 3.70% phospholipid(PL) as dry basis, and there were $47{\sim}65%$ decrease in PL content during sun-drying. The NL class of raw pollack mainly consisted of triglyceride(TG), sterol(ST)+diglyceride(DG), hydrocarbon(HC)+sterol ester(SE), and main components in PL class were phosphatidylcholine(PC), phosphatidylethanolamlne(PE) and phosphatidylserine(PS). The contents of TG, ST+DG, PC and PE decreased, while those of free fatty acid, HC+SE, sphingomyelin and lysophosphatidylcholine increased markedly during sun-drying. The major fatty acids of TL in raw pollack, PD and SD samples were generally 22:6, 16:0, 20:5, 18:1 and 18:3; 20:5 decreased markedly during sun-drying, while saturates and monoenes such as 16:0, 18:0 and 18:1 increased slightly. And remaining ratios of polyunsaturated fatty acids of TL, NL and PL in SD and SS samples were 81.1%, 92.5%. 73.3%, and 74.6%, 74.1%, 45.4%, respectively. The results of changes in lipid components during sun-drying showed that sodium chloride catalyzed the lipid oxidation of pollack meat during drying processing.

• Journal of Plant Biology
• /
• v.38 no.4
• /
• pp.373-380
• /
• 1995

Photoinhibition of photosystem (PS) n was induced in primary leaves of 25 day-old peppers grown $100\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1},\;at\;25^{\circ}C$. The modulation of PSII functionality in vivo was induced by varying both irradiance ($0-3000\;{\mu}molm^{-2}{\cdot}s^{-1}$) and duration (0-70 min) of light treatment. The functionality of PSII was investigated in terms of photochemical efficiency of PSII (Fv/Fm) and quantum yield of $O_2$ evolution, and expressed as a function of photon exposure [$mol\;photons{\cdot}m^{-2}$, the product of irradiance and duration of light treatment (Bell and Rose, 1981)]. Contrary to the linear decline of Fv/Fm ratio showing 50% decreases by absorption of $10\;mol\;photons{\cdot}m^{-2$, quantum yield of $O_2$ evolution decreased biphasically with increasing photon exposure, showing 50% decreases by absorption of $5.5\;mol\;photons{\cdot}m^{-2}$. Treatment of low temperature at $15^{\circ}C$ for 30 min alone did not affect the functionality of PSII, but high temperature ($45^{\circ}C$) significantly inactivated PSII activity. However, when Jeaves of pepper were subjected to low or high temperature in the presence of light, PSII was substantially photoinactivated. These results suggest the presence of different photoinhibitory mechanisms at low and high temperature.rature.

• Journal of Ginseng Research
• /
• v.12 no.1
• /
• pp.11-29
• /
• 1988

This study was conducted to investigate the effect of light intensity and temperature on the photosynthesis and respiration of ginseng plant. Highly significant, second degree curvilinear regressions were recognized among the photosynthesis of ginseng leaves, light intensity and temperature. And an interaction between the effects of light intensity and temperature on the photosynthesis of ginseng leaves was found to be highly significant. The increasing rate of photosynthesis with the increase of light intensity was markedly decreased with increasing temperature. The light compensation point of ginseng leaves was significantly varied with temperature, and the average point was approximately 600 lux. The light saturation point of Korean ginseng was 11,000 lux at $15^{\circ}C$ and $20^{\circ}C$ and around 9,500 lux at above $25^{\circ}C$. The decreasing rate of photosynthesis with the increase of temperature significantly increased with increasing light intensity. The optimum temperature for the photosynthesis of ginseng leaves was about 15 to $22^{\circ}C$ and markedly decreased with increasing light intensity. The highest photosynthesis occurred in ginseng leaves grown with the shade of 15% transmittance. The respiration of ginseng leaves increased with the shade of 5% and/or 30% transmittance. High temperature stimulated the respiration of ginseng leaves. Percent respiration to photosynthesis of ginseng leaves grown with the shade was increased at high temperature and decreased with increasing light Intensity. It was also increased with increasing transmittance. The maximum $CO_2$ absorption of ginseng leaves grown with the shade of 5Ps and ISVS transmittance accurred at 9 o'clock a.m., whereas that of 20% transmittance occurred at 7-9 o'clock a.m. The duration of $CO_2$ absorption was distinctively long with the shade of high transmittance. The $CO_2$ compensation point in the photosynthesis of ginseng leaves was 130 ppm.

• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.171-177
• /
• 2005

Even though the cost associated with the repair and rehabilitation of existing structures are rapidly increasing, vast number of the repaired and rehabilitated structures do not function properly as expected during their remaining service lives. This paper focused on the flexural behavior of reinforced concrete slabs repaired and reinforced by PS strand and polymer mortar in the tension face. The slabs have the size of 700${\times}120{\times}$2200 m and 700${\times}120{\times}$1300 mm. Variables of experiment were space of strengthening, chipping, the number of strand, the kind of mortar in this experimental study. Attention is concentrated upon overall bending capacity, deflection, ductility and failure mode of repaired and reinforced slabs. Test results show that deflection of repaired and reinforced slabs reduced to approximately $40 \%$ comparison to standard slabs. Boundary cracking of chipping slab started ultimate load afterward. Concrete-mortar interface cracked 64.5 kN in repaired slab with AP mortar and 36.0 kN in repaired slab with general polymer mortar. Reinforcement effect increased with reducing space of strand. Also, Reinforcement effects are more by strand than by polymer mortar.

• KSBB Journal
• /
• v.31 no.1
• /
• pp.27-32
• /
• 2016

Several CoA transferases from Clostridium beijerinckii, C. perfringens and Klebsiella pneumoniae were examined for biosynthesis of lactate-containing polyhydroxyalkanoates (PHAs) in recombinant Escherichia coli XL1-Blue strain. The CB3819 gene and the CB4543 gene from C. beijerinckii, the pct gene from C. perfringens and the pct gene from K. pneumoniae, which encodes putative CoA transferase gene, respectively, was co-expressed with the Pseudomonas sp. MBEL 6-19 phaC1437 gene encoding engineered Pseudomonas sp. MBEL 6-19 PHA synthase 1 ($PhaC1_{Ps6-19}$) to examine its activity for the construction of key metabolic pathway to produce poly(3-hydroxybutyrate-co-lactate) [P(3HB-co-LA)]. The recombinant E. coli XL1-Blue expressing the phaC1437 gene and CB3819 gene synthesized poly(3-hydroxybutyrate) [P(3HB)] homopolymer to the P(3HB) content of 60.5 wt% when it was cultured in a chemically defined medium containing 20 g/L of glucose and 2 g/L of sodium 3-hydroxybutyrate. Expression of the phaC1437 gene and CB4543 gene in recombinant E. coli XL1-Blue also produced P(3HB) homopolymer to the P(3HB) content of 51.2 wt% in the same culture condition. Expression of the phaC1437 gene and the K. pneumoniae pct gene in recombinant E. coli XL1-Blue could not result in the production of PHAs in the same culture condition. However, the recombinant E. coli XL1-Blue expressing the phaC1437 gene and the C. perfringens gene could produce poly(3-hydroxybutyrate-co-lactate [P(86.4mol%3HB-co-13.7 mol%LA) up to the PHA content of 10.6 wt% in the same culture condition. Newly examined CoA transfereases in this study may be useful for the construction of engineered E. coli strains to produce PHA containing novel monomer such lactate.

• Journal of Pharmaceutical Investigation
• /
• v.20 no.4
• /
• pp.223-228
• /
• 1990

The contribution of endogenous transport systems to the blood-brain barrier (BBB) transport of basic and acidic drugs was studied by using a carotid injection technique in rats and an isolated bovine cerebrovascular disease state were compared between the normotensive rats (WKY) and stroke-prone spontaneously hypertensive rats (SHRSP) which have been well established as an animal model with pathogenic similarities to humans. Basic drugs such as eperisone, thiamine and scopolamine inhibited, in a concentration dependent manner the in vivo uptake of $[{^3}H]choline$ through BBB, whereas amino acids and acidic drugs such as salicylic acid and valproic acid did not inhibit the uptake. The uptake of $[^3H]choline$ by B-CAP increased with time and showed a remarkable temperature dependency. The uptake of $[^3H]choline$ by B-CAP showed the very similar inhibitory effects as observed in the in vivo brain uptake, and was competitively inhibited by a basic drug, eperisone. The in vivo BBB uptakes of $[^3H]acetic$ acid and $[^{14}C]salicylic$ acid were dependent on pH of the injectate and the concentration of drugs. Several acidic drugs such such as salicylic acid, benzoic acid and valproic acid inhibited the in vivo uptake of $[^3H]acetic$ acid, whereas amino acid, choline and a basic drug such as eperisone did not inhibit the uptake. The uptake of acetic acid by B-CAP was competitively inhibited by salicylic acid. The permeability surface area product (PS) through BBB for $[^3H]choline$ in SHRSP was significantly lower than that in WKY. The concentration of choline in the brain dialysate in SHRSP was about half of that in WKY, while no significant difference was observed in the plasma concentration of choline between SHRSP and WKY. No significant difference was observed in the transport of monocarboxylic acids, glucose and neutral amino acid through BBB between SHRSP and WKY. From these results, it was concluded that BBB transport system of choline contributes to the transport of basic drugs through BBB, that acidic drugs can be transported via a moncarboxylic acid BBB transport system and that the specific dysfuntion of the BBB choline transport in SHRSP was ascribed to the reduction of the maximum velocity of choline concentration in the brain interstitial fluids.

• Journal of Preventive Medicine and Public Health
• /
• v.34 no.4
• /
• pp.427-436
• /
• 2001

Objective : To estimate the prevalence of congenital heart disease from the 1990 student heart disease screening program. Methods : The heart disease screening program for elementary students was conducted in Kyonggi-do, in 1998. The subjects of the present study comprised the 40,402 students who attended the schools in the catchment area of a collaborative university hospital and who participated in the primary examination. The congenital heart disease (CHD) patients were initially identified through a questionnaire about prior medical history, and further through diagnostic tests & medical examinations in the secondary & the tertiary examinations. Certain assumptions were used in the estimation of the number of CHD cases among non-participants of the secondary & tertiary examinations. The overall prevalence of CHD was estimated by adding the CHD detection rates of the participants and the estimated prevalence of the non-participants. Results : Among the 40,402 primary participants, 1,655 were referred further, of whom 79.1% (1,309) participated in the secondary examination. Of these, 121 were referred to the tertiary examination, with a participation rate at this last stage of 80.2%. The positive predictive value (PPV) of the screening tools was the highest when the results of both EKG and the questionnaire were positive. Because 85.9% of the detected cases had a past history of CHD, PPV was higher when the selection criteria in the questionnaire included past CHD history than when it didnt. The CHD defection rate among the participants was 1.76 cases/1,000 and the presumed number of cases among the non-participants was 31; giving an estimated final CHD prevalence of 2.52 cases/1,000 (95% CI : 2.06-3.06). Among the identified cases of CHD, VSD (52.8%) was the most common, followed by PDA (9.7%), TOF (9.7%) & PS (9.7%). Conclusion : Because the characteristics of the non-participants differed from those of the participants, the estimation of prevalence was influenced by the participation rate. Of the detected cases, 85.9% had a past history of diagnosis or operation for CMD. These findings suggested that the prevalence estimated in this study may be an underestimation of the actual condition. Therefore, a birth cohort study is required in order to more accurately estimate the prevalence and the effects of the program.

• The Korean Journal of Emergency Medical Services
• /
• v.1 no.1
• /
• pp.100-111
• /
• 1997

This is the first Korea study to evaluate the effects od the safety of ambulance driving and the occurrence of ambulance traffic accidents and to provide basic informaion for the description of various factors to reduce the ambulance traffic accidents. The major insturment of this study were Krean Self-Analysis Driver Opinionnaire. Questionnaire contains 8 items which measure driver's opinions or attitudes : driving courtesy, emotion, traffic law, speed, vehicle conditions, the use of drugs, high-risk behaviors, and human factors. To take the analysis of data, the total of 350 divers were investigated ambulance divers and others in Taejon City and others (6 City) from 1996. 1. July to 1996. 31. July. The data were analyzed by the descriptive statistics and the logistic regression - path analysis - with SPSS and SAS package program. The result are as follows : 1. There was desirable attitude group(16.2%) and undesirable attitude group(17.6%) on safety ambulance driving. 2. It have suggested that risk factors of ambulance traffic accidents much affected with emotion and speed control on safety ambulance driving < Y(Accdient) = -2.64 + 0.57 $X_1$ (Emotion Control) + 0.30 $X_2$(Seed control) + E > and motor traffic acident much affected with emotion control and high-risk behavior on safety driving < Y(Accident) = -1.11 + 0.33 $X_1$(Emotion Control) + 0.29 $X_2$(High-risk Behvior) + E > 4. The primary emphassis of ambulance drivers was make us realized that improthatnt factors on safety ambulance driving were 1)making way for emergent ambulance, 2)driver's career, 3)The ability of emergency medical technics, and the knowledge or under standing of ambulance way difficut(or easy) of accdess. 5. Almost 96.6% of respondents have agreed to necessity of emergency medical technics for ambulance drivers. 6. Almost 94.6% of respondents have consented to necessity of emergtency medical technicians for ambulance driving. 7. It have suggested that the proportion of traffic accident proportion by desitable attitude group(16.7%) was much less than that of undesirable attitude group(30.8%) on safety ambulance driving(P < 0.05)/Ps) Accidents are unplanned, unforesen incidents which can lead to harmful or unfortunate outcomes, Collisons are not accidents, since the basic cause of the majority of collisons invovles high-risk human behavior. Although there are many factors which contribute to accident causation, four basic factors seem to predominate in most traffic related situations. These four factors include: the human factor, the vehicle factor, the environmental factors and destination factor(Peto G. et al. 1995).

• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.17-21
• /
• 2019

In this study, selective laser sintered 3D printing mold core and metal core were used to investigate the difference of the thickness shrinkage from the gate of the injection molded part at a constant interval. SLS 3D printing mold core was made of nylon-based PA2200 powder and the metal core was manufactured by conventional machining method. As the PA2200 powder material has low strength, thermal conductivity and high specific heat characteristics compared with metal, molding conditions were set with the consideration of molten temperature and injection pressure. Crystalline resin(PP) and amorphous resin(PS) with low melting temperature and viscosity were selected for the injection molding experiment. Cooling time for processing condition was selected by checking the temperature change of the cores with a cavity temperature sensor. The cooling time of the 3D printing core was required a longer time than that of the metal core. The thickness shrinkage of the molded part compared to the core depth was measured from the gate by a constant interval. It was shown that the thickness shrinkage of the 3D printing core was 2.02 ~ 4.34% larger than that of metal core. In additions, in the case of metal core, thickness shrinkage was increased with distance from the gate, on the contrary, in the case of polymer core showed reversed aspect.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.154-164
• /
• 2011

This study was conducted to develop the semi-crawler type mini-forwarder that can be operated comfortable small-scale logging operation in the steep terrain and also used at a variety of operations such as the civil work in erosion control and forest-road. Considering the minimum turning radius and the width of forest operation road, the total length, width and loading capacity of the semi-crawler type mini-forwarder is 5,750 mm, 1,900 mm and $2.5m^{3}$, respectively. The maximum engine power is 96ps at 3600 rpm. Selected hydraulic pumps are consists of two main pumps and two sub-main pumps. Main hydraulic pumps are utilized to running motor of the front wheel and rear crawler. Sub-main pumps are utilized to the actuation parts such as steering, crane, out-rigger and dump cylinder. The transmission was adapted as the HST (Hydro-Static Transmission) system. The driving parts are designed and manufactured as the front wheel type and the rear crawler type. The steering type was manufactured as the ackerman type. Driving control parts type was designed and manufactured as driver's seat type of normal cars. It is also attached on auxiliary equipments such as winch, log grapple and out-rigger. The traveling speed of the semi-crawler type mini-forwarder in forest road was 5.3 km/hr to 7.7 km/hr.