• Journal of Pharmaceutical Investigation
• /
• v.36 no.4
• /
• pp.223-229
• /
• 2006

[ $PGE_1$ ]-ethyl ester intraurethral solutions were prepared in ethanol/propylene glycol mixture with penetration enhancer and viscosity-enhancing agent. The stability of $PGE_1$-ethyl ester in intraurethral solution was investigated at various temperature. Simultaneous determination of $PGE_1$-ethyl ester and $PGE_1$ was performed using a validated HPLC technique. In pentobarbital anesthetized cats, increase in intracavernous pressure(ICP), increase in penile length and duration of erectile response were determined after intraurethral application of $PGE_1$-ethyl ester solutions. $PGE_1$-ethyl ester solutions, when instilled into the eyes of rabbits, produces no noticeable irritation, or slight transient conjunctival irritation. From these results, ocular irritation of this solutions was judged as practically non-irritating. The stability study indicates that the therapeutically effective content in solution is well maintained for 46 weeks or longer when they are stored at $4^{\circ}C$. After intraurethral application of $PGE_1$-ethyl ester, ICP was increased and penile erection was induced. $PGE_1$-ethyl ester intraurethral solutions for erectile dysfunction could be developed and evaluated by employing feline erection model.

• YAKHAK HOEJI
• /
• v.41 no.1
• /
• pp.48-59
• /
• 1997

Sustained release matrix tablets, pellets, and coated pellets for the delivery of sulindac were prepared using cellulose derivatives at various ratios, and evaluated for the dis solution pattern. The release of sulindac, from matrix tablets prepared with low viscosity HPMC was relatively fast, and especially the tablets made of Metolose SM released all of sulindac within 1 hr. The release of drug from tablets made of other HPMC derivatives were retarded in the order of the following: Pharmacoat 645>Pharmacoat 606>Pharrnacoat 606+HPC-L>HPC-L. The most sustained release pattern was observed with the preparation of high viscous polymer. Metolose 90 SH. While release of sulindac, from matrix type pellet containing 10mg/cap of Metolose 90 SH or 60 SH was completed within 1 hr, a prolonged release formulation (30% in 1 hr) was obtained by the inclusion of EC. Pellets coated with HPMC showed a fast release pattern (${\geq}$ 80% within 2 hrs), whereas pellets coated with HPMC and EC (molar ratio 1 : 1) showed a sustained release pattern (${\geq}$ 80% in 12 hrs), vath the release from EC pellets being the most sustained. Fast (naked) and slow release pellets coated with EC, Metolose 60SH 50cps and propylene glycol. and enteric pellets coated with HPMCP 55 and Myvacet$^{\circledR}$ were prepared, and combined at various ratios for the assessment of dissolution pattern. The result indicates the possibility that the development of 24 hr sustained release delivery systems containing sulindac for oral administration could be achieved by means of combining sustained and fast release pellets at a proper portion.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.10
• /
• pp.883-890
• /
• 2005

In this study, 2 pure hydrocarbon refrigerants of R1270 (Propylene) and R290 (Propane) and 3 binary mixtures composed of R1270, R29O and R152a were tested in a refrigerating bench tester with a scroll compressor in an attempt to substitute R502 used in most of the low temperature applications. The test bench provided 3\sim3.5$ kW capacity and water and water/glycol mixture were employed as the secondary heat transfer fluids. All tests were conducted under the same external conditions resulting in the average saturation temperatures of -28 and $45^{\circ}C$ in the evaporator and condenser, respectively. Test results showed that all refrigerants tested had $9.6\sim18.7\%$ higher capacity and $17.1\sim27.3\%$ higher COP than R502. The compressor discharge temperature of R1270 was similar to that of R502 while those of all other refrigerants were $23.7\sim27.9\%$ lower than that of R502. For all alternative refrigerants, the amount of charge was reduced up to $60\%$ as compared to R502. Overall, these alternative refrigerants offer better system performance and reliability than R502 and can be used as long term substitutes for R502 due to their excellent environmental properties.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.149-162
• /
• 2003

Moisturizing the skin is one of the most important functions of skincare cosmetics, because water plays a significant role in keeping the skin healthy. There are various humectants including polyol (glycerin and 1,3-butylene glycol), water-soluble polymers, and botanical extracts. It is well known that the increased amount of polyol in lotion for obtaining high moisturizing effect gives a sticky feeling to the skin. Therefore, a few humectants that can give high moisturizing effect without a sticky feeling for lotion formula is available. On the other hand, oil-based lipstick is well known to have a difficulty to contain a large amount of hydrophilic humectants, because the humectants is unable to be mixed well into oil-based lipsticks and give the lips a peculiar taste. There are newly developed humectants, polyoxyethylene/polyoxypropylene dimethyl ether (EPDME) that can solve these problems describable above. EPDME is a random copolymer of ethylene oxide and propylene oxide. EPDME gives a low sticky feeling with a high moisturizing effect when it is used in lotion. As a remarkable character, EPDME can show not only a preventing effect on rough and dry skin, but also a improving effect upon the use for 1-4 weeks. EPDME can show a synergistic effect with glycerin on preventing to rough and dry skin. Since EPDME can be dissolved in oil-based formulation and used as an ingredient of lipsticks, EPDME can give a moisturizing effect that allows lip to be healthy condition. EPDME can also give no peculiar taste even upon the use of a large amount. EPDME is a useful cosmetic ingredient that can show a good skin care effect in both water-based formula and oil-based formula. EPDME of which polarity can be controllable is expected to be used for various cosmetic applications in near future.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.207-210
• /
• 2004

Glycyrrhiza uralensis (licorice root) is very useful medicinal herb because of strong anti-inflammatory and anti-wrinkle effect. Therefore, it is widely used in functional cosmetics. However, it is insoluble and easily decomposed by light, heat, oxygen, etc. In this study, we first prepared NanoSolve-Licorice (30-50nm) using Glycyrrhiza uralensis and propylene glycol! hydrogenated lecithin/caprylic/capric triglyceride/glycerin/water system with microfluidizer. And then, NanoSolve-Licorice and porous PMMA are dispersed in ethanol. Finally, we could get a stabilized system with high-pressure homogenizer (1,000 Bar, 3 passes). According to HPLC measurement for glabridin content, our system is more stable compared with general liposome ones. Capsulated licorice has an enhanced anti-inflammatory effect on account of excellent skin penetration. We also evaluated our final product through image analyzer, particle size analyzer, FF-TEM and chromameter.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.153-158
• /
• 2004

In cosmetics, the saturated lecithin, one of the main surfactants to prepare liposome has been used for its stability but it has been substituting with unsaturated lecithin which has excellent skin affinity and penetration property. So we studied to prepare nano-liposome that size of particles were below than 50nm by unsaturated lecithin. It was important that many factors including solvent such as propylene glycol, pH balance, homogenizing pressure, various cosurfactants and stabilizers to make stable nano-liposome. In our experimental conditions, cosurfactants with stearate class as lipophilic part were more suitable than others for our purpose. But in liposome by saturated lecithin, cosurfactants had negative effect and appropriate amount of oil should be used to be stable. These results indicated that unsaturated lecithin were more suitable than saturated lecithin to prepare nano-liposome.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.268-279
• /
• 2003

The nano capsulation of the ceramide was a technique that capsulated ceramide III and tocopheryl linoleate at the mono-vesicle, so as to act the horny layer in skin. It was used 0.5-5.0 wt% of hydrogenated lecithin and 0.01~2.00 wt% of lysolecithin as the membrane-strengthen agents of the mono-vesicle, 5.0~10 wt% of propylene glycol and 5.0~10.0 wt% of ethyl alcohol made by high-pressure Microfluidizer. To enhance the moisturizing efficacy and treat an atopy skin, used ceramide III and tocopheryl linoleate as the active ingredients, and it was made the nano-capsule that synthetic emulsifiers were free. The optimal condition of capsulation of nano ceramide was as follows. The conditions were 3 times at 1,000bar and 60-7$0^{\circ}C$. The particle size showed 63.1$\pm$7.34 nm such as the transparence water as the results for measuring by the laser light scattering. A zeta potential value was -55.1$\pm$0.84 ㎷. The result of the clinical test, the moisturizing effect (in-vivo, n=8, p-value<0.05) was improved 21.15% compared to control, as well as it was improved 36.31 % before the treatment. Moreover, the effectiveness of atopy skin indicated positive reaction that patients were 10 volunteers.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.1021-1030
• /
• 2007

The effects of the creamide III (CER3) and cholesterol (CHOL) on the structure of a non-hydrous distearoyl phosphatidylcholine (DSPC)-based lamellar liquid crystal (LC) hydrated by only propylene glycol (PG) without water were investigated by differential scanning calorimetry (DSC), X-ray diffractions (XRDs), and polarized microscope (PM). As soon as CER3 was incorporated into the lamellar phase, the characteristic LPP was appeared as well as the characteristic SPP, and the formation of separated CER3 crystalline phase was observed depending upon the increase of CER3 content by XRDs. Also, by DSC, it was shown that the increase of CER3 made the monotectic thermal transition be changed to the eutectic thermal transition which indicates the formation of separated CER3 crystalline phases and the main transition temperatures (Tc1) to be gradually decreased and the enthalpy change (ΔH) to be linearly increased. Incorporating CHOL, the formation of LPP and SPP showed almost similar behaviors to CER3, but incorporating small amounts of CHOL showed the characteristic peaks of CHOL which meant the existence of crystalline CHOL phase due to the immiscibility of CHOL with DSPC swollen by PG differently from CER3, and increasing CHOL made the intensity of the 1st order diffraction for LPP weakened as well as the intensities of the characteristic diffractions for DSPC. Also, in the results of DSC, it showed more complex thermal behaviors having several Tc than CER3 due to its bulky chemical structure. In the present study, the inducement of CER3 and CHOL as other lipids present in human stratum corneum (SC) into a non-hydrous lamellar phase is discussed in terms of the influence on their structural and thermal transition.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.21 no.2
• /
• pp.22-48
• /
• 1995

This study was investigated to search for the effects of the structure of each component in four-component O/W microemulsion system on its formation region, droplet size and stablilty. The results was that the more number of OH site, the shorter carbon chain length of polyol, the larger formation region of microemulsion was showed. The small microemulsion droplet was obtained on condition that the polatry of oil was large and carbon chain length of hydrophobic group of surfactant was long. In using satrated hydrocarbon (such as liquid paraffin, squalane) as dispersed phase, the stability of microemulsion was better than aromatic oil phase.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.2
• /
• pp.129-138
• /
• 1999

피부 전용 제재 개발을 위해 요구되는 동물 대체 시험법 중 가장 적극적으로 연구가 행하여지곤 실제 실용화가 예상되는 것은 안점막 자극 시험으로 지금까지 여러 가지 방법이 개발되었지만 그 중 계란 유정란의 응모요막(CAM)을 이용한 방법이 현재 가장 활발히 진행되고 있다. 이 방법이 일부 국가에서 이미 안점막 자극 시험 동물 대체 시험법으로 공인되었으며 현재까지도 validation 연구를 활발히 진행하고 있다. 본 연구에서도 국내에 적합한 안점막 자극 시험 동물 대체 시험법의 공인 시험법 개발 및 validation study를 목표로 계란 유정란의 응모요막을 이용한 방법 중 HET-CAM 방법을 시행하였으며 안점막 동물 대체 시험법으로 확립하고자 하였다. 틴ET-CAM 방법의 보완을 위해 배양된 세포를 통해 자극도를 측정할 수 있는 방법인 Cytotoxicity test를 도입하여 시행하였으며 두 방법의 data들을 분석하여 validation study를 수행하였다. 국내 유수의 6개 장업사가 본 연구에 참가하여 20가지의 화장품 전용제재를 대상으로 1차, 2차 validation study 를 진행하였다. HET-CAM test, Draize eye irritation test, Cytotoxicity test 측정 결과 HET-CAM 의 “Q” 수치는 대부분 강자극 수치인 2 이상이었고 10% sodium hydroxide가 가장 높은 수치를 보였으며 Tween 20(sorbitanpolyoxyethylene monolaurate) 100%가 가장 낮은 수치를 보였다. In vi패의 경우 10% sodium hydroxide가 가장 높은 수치를 보였으며 30군 propylene glycol 이 가장 낮은 자극수치를 보였다. HET-CAM test 와 Draize eye irritation test, Cytotoxicity test 간의 상관성 분석은 linear correlation coefficient 와 rank correlation coefficient를 구하여 비교하였으며 6개 장업사(A-F)의 실험실에서의 HET-CAM test 결과를 취합하여 각각 두 실험실간의 상관관계(linear correlation)를 분석하였다. Linear correlation coefficient 분석 결과를 보면 전반적으로 상관관계가 0.589 - 0.954의 범위였으며, 특히 A사와 B사 사이의 경우 0.954이었으며, E사와 D사 사이의 경우 0.942로 높은 상관관계를 보였다. 그 외에도 A사와 D사 사이의 경우(0.589)와 B사와 D사 사이의 경우(0.638)를 제외하고는 대체로 높은 상관관계를 나타내었다.