• 산업공학
• /
• 제7권2호
• /
• pp.99-105
• /
• 1994

The Artificial Intelligence Lab of Industrial Engineering Department, Korea University is continuing to develop expert systems for quality control methods such as acceptance control, process control and reliability analysis. As a series of these efforts, The Artificial Intelligence Lab of Industrial Engineering Department, Korea University is continuing to develop expert systems for quality control methods such as acceptance control, process control and reliability analysis. As a series of these efforts, this paper concerns an expert system for design of experiment. The system includes factorial experiments, response surface methodology and Taguchi method. PROLOG is used as a language with dBASE III＋ for the data base management system and C for calculations and graphics. This system selecting the appropriate method and analyzing the data obtained can be implemented on an IBM PC 386 or a higher level machine.

• 정보관리학회지
• /
• 제8권2호
• /
• pp.3-31
• /
• 1991

본 연구에서는 지능형 정보 검색의 개념을 정립하고, 지능형 정보 검색 시스템의 모 형을 제시하였다. 실제로 우리말 문헌을 검색하는 지능형 시스템을 구현하였으며, 이 시스템 은 자연 언어 인터페이스, 이용자 모형화, 격관계를 이용한 자동 색인, 복수의 검색 기법 등 을 수용한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.161-164
• /
• 1992

In operation of power systems, operators must solve overloads in abnormal conditions instantaneously for restoring the power system to normal state. Earlier works proposed the power flow distribution and the load shedding decision, developed by the expert system, for settling overloads. This paper presents a method for solving special conditions in the earlier works which requires less amount of loads than that of the load shedding, in particular, of the load shedding considering the priority. This paper uses the effort system to improve the ability of a beginner as well as of trained operators for operating the power system during emergency operation. To prove efficiency of the proposed method, this paper has adopted the model system with 13 bus for obtaining simulation results and used the prolog language to implement the system.

• 대한전기학회논문지
• /
• 제39권10호
• /
• pp.1021-1028
• /
• 1990

본 논문은 전력계통의 고장진단 전문가시스템에 관한 것으로서 개발된 전문가 시스템은 전력계통에서의 사고 발생시 그 고장구간을 추정하고 보호기기의 오.부작동을 판정하며 이를 통하여 고장의 전파과정을 설명하도록 고안되었으며 또한 사고발생후 취하여질 복구작업에 필수적으로 요구되는 정전구역의 탐색의 효율을 위하여 탐색구간을 제한하였다. 본 전문가 시스템은 포롤로그 언어를 사용하여 구성하였으며 모의계통에 적용하여 그 요 성을 입증하였다. 입증하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 추계학술대회 논문집
• /
• pp.141-148
• /
• 1994

In order to improve the productivity of cold forging at low production cost, an integrated system's approach is necessary in handling the material preparation and the optimum process design, considering the forming machines, tooling, and operation including quality control. As the first step toward this approach, an expert system for multi-stage cold forging process design for fasteners with various head geometries is developed using Prolog language on IBM 486 PC. For effective representation of the complex part geometries, the system uses the multiple element input, and the forward inference scheme in determination of the initial billet size and intermediate forging steps. In order to determine intermediate steps, the basic empirical rules for extrusion, heading, and trimming were applied. The required forming loads and global strain distributions at each forging step were calculated and displayed on the PC monitor. The designed process sequence drawing can be obtained by AutoCAD. The developed system will be useful in reducing trial and error of design engineers in determining the diameter and height of the initial cylindrical billet from the final product geometry and the intermediate necessary sequences.

• 한국안전학회지
• /
• 제7권1호
• /
• pp.31-38
• /
• 1992

This paper presents a study on application of expert system technique for the diagnosis of fire-causes in plants. A need is recognized for new methods to diagnose exactly the causes of fires without the help of the human experts. To cope with the difficulty, the expert system techiuque is applied to this area. The expert system suggested in this paper is developed to infer the causes of fires(or, ignition source ) by using the information drawn from the circumstances in fire. For the convenience of inference, ignition sources we classified into eight types ; elecoic spark, adiabatic compression, welding spark, material of high temperature, impact and friction, spontaneous ignition, naked fire, and static electricity. The knowledge base is composed of the rule base and dynamic database, which contain the rules and facts obtained by the expenence in this area, respectively. Both depth-first search and backward chaining schemes are used in reasoning process. This expert system is written in an artificial intelligence language "PROLOG", and its availability is demonstrated through the case study.

• 대한전기학회논문지
• /
• 제39권1호
• /
• pp.16-21
• /
• 1990

A Knowledge based expert system is a computer program that emulates the reasoning process of a human expert in a specific problem domain. Expert system has the potential to solve a wide range of problems which require knowledge about the problem rather than a purely analytical approach. This papaer presents the application of knowledge based expert system to power system fault diagnosis. The contents of expert system develpped in this paper is judgement of fault section from a given alarm sets and production of all possible hypothesis for the single fault. Both relay failures and circuit breaker failures are considered simultaneously. Although many types of relay are used in actual system, experts recognize ones as several typical signals corresponding to the fault types. Therefore relays are classified into several types. The expert system is written in an artificial intelligence language "PROLOG" . Best-first search method is used for problem solving. Both forward chaining and backward chaining schemes are used in reasoning process. The application to a part of actual power system proves the availability of the developed expert system.

• 한국도서관정보학회지
• /
• 제19권
• /
• pp.35-57
• /
• 1992

This study is an attempt to provide some helpful data for the design and the implementation of the expert system for the book-classification based on the analysis of various cases of the classification-expert system models. Following the introduction, the concepts and some features of an expert system were overviewed in the second chapter, on the basis of which the following concrete cases were introduced and analyzed in the third chapter : (1) ACN System for NC, (2) Expert System for NDC, (3) Expert System for UDC, (4) Herba Medica System, (5) Expert System for IPC, (6) Stratcyclode Project, (7) Expert System for Classification of INIS Database, (8) AutoBC System, and etc. In the conclusion, for the development of the classification-expert system, it was turned out that constructing a new system by using an AI language such as Prolog or LISP is more desirable than employing any one of expert system shells. Together it is necessary for the following requirements to be met : (1) The subject concept of a document elicited should be accurate. (2) Not only a domain knowledge but also the knowledge covering all the subjects should be represented in the knowledge-bases. (3) The knowledge-bases should be organized in such a way that the characteristics of the knowledge about classification should be well defined. (4) rule-base consisting of accurate rules about classification should be made. (5) It should be possible for classification code wanted to be generated immediately.

• Journal of Welding and Joining
• /
• 제10권4호
• /
• pp.199-212
• /
• 1992

Expert system is a practical application part of the artificial intelligence and can be generally described as a computer-based system designed to simulate the knowledge and reasoning of a human expert, and to make that knowledge conveniently available to other people in a useful way. Expert systems consist of three major components, knowledge base, inference engine and user interface. In this paper, it is aimed to construct a prototype system to design the horizontal-typed pressure vessel. To do this, a representative artificial programming language, Turbo Prolog, was employed, and the knowledge representation was mainly done by the production rule such as "If(condition), than (action)" style and by the predicate logic. In the developed system, it was quite easy to represent the knowledge of "If(condition), then (action)"style and by the predicate logic. In the developed system, it was quite easy to represent the knowledge of "If(condition). then(action)" style and the various table-like data. It was also effective to represent the graphics. Though this expert system is by now small and incomplete, it is possible to expand it to a larger and refined system later.rger and refined system later.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.241-245
• /
• 1989

A knowledge based expert system is a computer program that emulates the reasoning process of a human expert in a specific problem domain. This paper presents an expert system to diagnose the various faults in power system. The developed expert system is represented considering two points; the possibility of solution and the fast processing speed. As uncertainties exist in the facts and rules which comprise the knowledge base of the expert system, Certainty Factor, which is based on the confirmation theory is used for the inexact reasoning. Also, as the diagnosis problem requires the inductive reasoning process in nature, the solution is imperfect and not unique in general. So the expert system is designed to generate all the possible hypothesis in order of the possibility and also it can explain the propagation procedure of the faults for each solution using the built in backtracking mechanism. In realization of the expert system, the processing speed is greatly dependent upon the problem representation, reasoning scheme and search strategy. So, in this paper the fault diagnosis problem itself is analysed from the view point of Artificial Intelligence and as a result, the expert system has the following basic features. 1) The certainty factor is adopted in the inference engine for inexact reasoning. 2) Problem apace is represented using the problem reduction technique. 3) Bidirectional reasoning scheme is used. 4) Best first search strategy is adopted for rapid processing. The expert system was developed us ing PROLOG language.