• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.31 no.3
• /
• pp.101-124
• /
• 2020

Plan S is a policy that mandates research papers supported by specific funders such as the European Community be published in open access journals. The funder supports APC to researchers, providing a chance to advance the era of gold open access, and is expected to bring significant changes to the scholarly publishing ecosystem. This study explored the impact of Plan S from the perspective of each stakeholder of the scholarly publishing ecosystem, such as funders, academic societies or publishers, authors, and libraries, through a review of previous studies. In addition, the status of Korean gold open access publishing and position for each stakeholder were identified through the collected data analysis. As a result of the analysis, the share of publishing gold open access journals in Korea was 22%, which was less than 26% worldwide. Korean funding agencies were predicting and preparing for the impact of Plan S. On the other hand, Korean academic societies produce about 70% of all papers, but there are not many open access papers except medicine (51%). The response of the Korean library was not sufficient, and it contrasted with the activities of librarians in the U.S. that actively provide research support services based on the research lifecycle. It was suggested that Korean libraries should also actively try to change the role of librarians; advising researchers to plan open access publishing in grant project applications, consulting on copyrights, and so on. This study identified the background, principles, and impact of Plan S policy that would be effective in 2021 and examined the response situation in Korea. This study is valuable in that it served as the necessary basis for revitalizing the academic publishing ecosystem in Korea.

• Fire Science and Engineering
• /
• v.17 no.4
• /
• pp.20-27
• /
• 2003

Hazard Analysis is one of the basic tasks to ensure the safety of chemical plants. However, it is an arduous, tedious, time-consuming work and requires multidisciplinary knowledge and demands considerable cognitive load from the analysts. To overcome these problems, there have been attempts to automate this work by utilizing computer technology, particularly in the area of knowledge-based technique. There is two methods in the risk assessment of Chemical plant; quantitative and qualitative risk assessment. Both of them have been applied respectively, but if the integrated method of quantitative and qualitative risk assessments is used, all of the advantage of two methods can be applied. It is difficult to carry out integrated risk management of chemical plant. Therefore, automated integration system of risk management is necessary. We developed S/W Automated System for Hazard Screening & Analysis(ASCA) and applied to practical plant. By applying ASCA to case study, we can get the information about relative ranks of equipments, variable deviation, and consequence of potential accident. In this study, we applied ASCA to the H.T.U(Hydrotreating Unit) of the process to produce aromatic material. We could know relative ranks of equipments, variable deviation of malfunction in storage tank, D-101, and consequence of potential accident using ASCA. If integrated risk management in the chemical plant is applied, we can develop the emergency plan and prevent the accident.

• Journal of Sericultural and Entomological Science
• /
• v.49 no.2
• /
• pp.37-42
• /
• 2007

Lactoferrin, an ion-binding 80-kDa glycoprotein, has been suggested to have many biologic activities, such as facilitating ion absorption and having antimicrobial and anti-inflammatory effects. Several of these activities are likely to only be facilitated by human lactoferrin because they depend on the binding of human lactoferrin to specific receptor. To produce recombinant human lactoferrin to animal foods using transgenic silkworm, Bombyx mori L, we have cloned and sequenced the cDNA encoding for a human lactoferrin (HLf) from the mRNA in mammary tumor line (GI-101). As a result, the 2.5-kb fragment of HLf gene was cloned with pGEM-T vector and then this fragment was sequenced. In the nucleotide sequence analysis, single open reading frame of the 2,136-bp encoding for a polypeptide of 712 amino acid residues was detected. On the other hand, we constructed a recombinant plasmid(pPT-HLf), containing human lactoferrin gene for germ line transformation of the silkworm using a piggyBac transposon-derived vector. A nonautonomous helper plasmid encodes the piggyBac transposase. Approximately 6.7% of individuals in the G0 silkworms expressed green fluorescent protein (GFP). PCR analyses of GFP-positive silkworms (G0 and G1) revealed that independent insertions occurred frequently. Furthermore, Western blot analysis showed that the recombinant HLf expressed in hemolymph has the same molecular weight (80 kDa) as a native protein. On the basis of these experiments, expression of HLf in next generation of transgenic silkworm is now in process.

• Journal of Convergence for Information Technology
• /
• v.7 no.2
• /
• pp.101-109
• /
• 2017

This study was undertaken to understand how reference groups, convenience and pursuit of information affect subscription-based Webtoon service usage through reliability and curiosity, through which this study provides some suggestions for developing Webtoons and increasing profitability of service providers. Therefore, the reliability and feasibility analysis were conducted for 449 readers who used the paid webtoon more than once. In addition, the causality test was conducted to verify the research model. As a result of the research, this study shows the following implications: First, it is recommended that webtoon service providers produce webtoons with the webtoonists who have more expertise developing new webtoons. Second, webtoon service providers should focus on advertising during the episodes that are currently being subscribed to, or in the next episodes in order to stimulate the usage needs of readers rather than focusing on advertising the products related to the characters and their development and sales. Third, webtoon service providers are supposed to develop webtoons by using materials that can appear in everyday life. Fourth, webtoon service providers should continue their research in order to develop high quality products and express the unique characteristics of their advertisements by increasing investment in the development of products and advertising.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.3
• /
• pp.101-110
• /
• 2021

Purpose: In this study, we intended to study the change in bond strength according to the thermal cycling of provisional resin and 3D printed resin for making provisional restoration. Materials and Methods: Through DLP method, 3D printed resin powder was used to produce 3D printed resin samples. The samples were grouped into eight groups, according to types of provisional resin (PMMA, bis-acryl resin) which is to be bonded on the samples and numbers of thermal cycling (control, 2,000, 3,000, 5,000 cycles). Shear bond strength of the bonded samples was measured on the universal testing machine. Results: As the number of thermal cycling increased, the shear bond strength of PMMA and bis-acryl resin for 3D printed resins decreased except between 3,000 cycles and 5,000 cycles in PMMA groups. In the PMMA group, there were significant differences in shear bond strength between less number than 3,000 cycles (P < 0.05) and no significant differences between more number than 3,000 cycles (P > 0.05). In the bis-acryl resin group, there were significant differences in shear bond strength between control and 2,000 cycles, control and 3,000 cycles, and control and 5,000 cycles (P < 0.05), no significant difference between 2,000 and 3,000 cycles, between 3,000 and 5,000 cycles (P > 0.05). Conclusion: The shear bond strength between 3D printed resin and provisional resin tended to decrease after thermal cycling.

• Journal of Applied Biological Chemistry
• /
• v.65 no.3
• /
• pp.173-181
• /
• 2022

This study was carried out to investigate the residual characteristics of flubendiamide in kale to establish pre-harvest residue limits (PHRL) and the removal efficiency according to the washing solvent and method. Field tests were conducted at two different greenhouses, field 1 (Anseong-si, Gyeonggi-do) and field 2 (Incheon-si, Gyeonggi-do). According to the safe use guidelines kale was sprayed with flubendiamide twice every 10 days and harvested 0 (after 2 h), 1, 2, 3, 5, 7 and 10 days after the final application. The biological half-live of flubendiamide in kale was calculated based on dissipation curves of the pesticide in samples analyzed by liquid chromatography coupled with tandem mass spectrometry. In the analysis, method limits of quantitation (MLOQ) were 0.01 mg/kg, and recoveries performed with two different fortification levels of 10 MLOQ and maximum residue limit (0.7 mg/kg) were 104.2±3.6 and 101.9±10.2%, respectively. The dissipation rate constant of flubendiamide in kales were 0.2437 at field 1 and 0.1981 at field 2. PHRL calculation equations obtained using the dissipation constants estimated as follows: if the residual concentration of flubendiamide in kale on 10 days before harvest is less than 8.0 mg/kg, the residual concentration on the harvest would be under MRL. The removal of flubendiamide from kale was the greatest when it was washed with vinegar (39.8%), followed by baking soda (31.7%), calcium powder (30.2%), neutral detergent (27.2%), and tap water (15.9%). The results of this study would be useful for both farmers and consumers to produce or consume safe agricultural products.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.158-162
• /
• 2012

The acclimatization of in vitro propagated plants is an important step to produce vigorous plants for clonal forestry and in vitro micro-environment may affect the growth in ex vitro condition. To monitor in vitro environmental effects on the growth in ex vitro condition, several culture systems such semi-solid medium(SS), temporary immersion bioreactor(TIB) and continuous immersion bioreactor(CIB) culture types were tested to compare for the growth of acclimated plants of Liriodendron tulipifera. Results suggested that morphological characters, stomatal conductance, evapotranspiration and chlorophyll contents of acclimated plants were affected by the different of in vitro culture conditions. CIB type of culture was resulted to the lowest value in the biomass of acclimated plants. Net photosynthsis rate of CIB was the same level as those of SS and TIB. However, stomatal conductance, evapotranspiration and $CO_2$ partial pressure in the intercellular air space were lower than those of SS and TIB. The amounts of chlorophyll a, b and carotenoids were also lower than those of the other two culture systems. TIB, showing a little lower or higher value than SS in many growth character, is recommended rather than CIB to produce healthy yellow poplar plants in ex situ condition.

• Proceedings of the Korean Society of Life Science Conference
• /
• 2001.11a
• /
• pp.3-8
• /
• 2001

Isopentenyl diphosphate (IPP) is the common, five-carbon building block in the biosynthesis of all carotenoids, IPP in Escherichia coli is synthesized through the non-mevalonate pathway. The first reaction of IPP biosynthesis in E. coli is the formation of 1-deoxy-D-xylulose-5-phosphate (DXP), catalyzed by DXP synthase and encoded by dxs. The second reaction in the pathway is the reduction of DXP to 2-C-methyl-D-erythritol-4-phosphate, catalyzed by DXP reductoisomerase and encoded by dxr. To determine if one or more of the reactions in the non-mevalonate pathway controlled flux to IPP, dxs and dxr were placed on several expression vectors under the control of three different promoters and transformed into three E. coli strains (DH5(, XL1-Blue, and JM101) that had been engineered to produce lycopene. Lycopene production was improved significantly in strains transformed with the dxs expression vectors. When the dxs gene was expressed from the arabinose-inducible araBAD promoter (PBAD) on a medium-copy plasmid, lycopene production was 2-fold higher than when dxs was expressed from the IPTG-inducible trc and lac promoters (Ptrc and Plac, respectively) on medium-copy and high-copy plasmids, Given the low final densities of cells expressing dxs from IPTG-inducible promoters, the low lycopene production was probably due to the metabolic burden of plasmid maintenance and an excessive drain of central metabolic intermediates. At arabinose concentrations between 0 and 1.33 mM, cells expressing both dxs and dxr from PBAD on a medium-copy plasmid produced 1.4 - 2.0 times more lycopene than cells expressing dxs only. However, at higher arabinose concentrations lycopene production in cells expressing both dxs and dxr was lower than in cells expressing dxs only. A comparison of the three E. coli strains transformed with the arabinose-inducible dxs on a medium-copy plamid revealed that lycopene production was highest in XL1-Blue.

• Korean Journal of Medicinal Crop Science
• /
• v.13 no.3
• /
• pp.101-104
• /
• 2005

To explore the Korea native plants to substitute for St. John's wort, which produce hypericin that use commercially for the treatment of mild to moderate depression, hypericin contents of Hypericum erectum and H. ascyron collected in two mountain of Korea were examined. From TLC and TLC-densitometer analysis of hypericin contents and biosynthetic pattern, hypericin was detected in flower and leaf of H. erectum, but not in all organs of H. ascyron. The hypericin content of H. erectum grown 200 m high hill in Mt. Byoung-pung was higher than that of Mt. Ji-ri 500 m and 1300 m high hill. When the seasonal variation of hypericin contents in H. erectum leaf collected from two regions was investigated, leaf collected from both regions on July was higher than other seasons.

• CELLMED
• /
• v.1 no.1
• /
• pp.6.1-6.4
• /
• 2011

For cancer patients undergoing radiation therapy (RT) or systemic chemotherapy (CHT), cancer-related fatigue (CRF) is a common problem that can negatively impact their quality of life. Guarana (Paullinia cupana) is a plant native to the Amazon basin that has been used as a stimulant since pre-Columbian times. PURPOSE: To evaluate the effectiveness of guarana extract on fatigue in BC patients undergoing either CHT or RT. A total of 137 cancer patients (85% with Breast Cancer) undergoing either CHT (101) or RT (36) were randomized to receive either a placebo or guarana. In all 3 studies, the guarana was given as an unmanipulated dry extract at a dose of 75 mg PO QD in the first two studies or 50 mg PO BID in the third study. Patients were crossed over to the other experimental arm, and we evaluated fatigue with the Chalder Scale in all three studies. Guarana significantly improved the The Chalder Scale Global Scores (- 0.85; 95% CI:-1.31 to -0.40; p = 0.0002); Physical Fatigue Scores (-0.44; 95% CI: - 0.74 to - 0.13; p = 0.005) and Mental Fatigue Scores (-0.93; 95% CI: - 1.14 to - 0.72; p < 0.00001). Guarana did not produce any CTCAE grades 3 or 4 toxicities in any of the studies. Guarana is an effective, cheap and non-toxic alternative for the treatment of fatigue in cancer patients undergoing treatment.