• Journal of Service Research and Studies
• /
• v.13 no.1
• /
• pp.186-200
• /
• 2023

This study aims to improve the usability of the white cane, which is walking equipment that most local visually impaired people use and carry when going out, and to contribute to the prevention of safety accidents and the walking rights of visually impaired people by providing improvement and resolution measures for the problems identified. Also, this study is a study on the visually impaired, primarily targeting the 1st to 2nd degree visually impaired people, who cannot go out on their own without walking equipment such as a white cane, corresponding to 20% among approximately 250,000 blind and low vision people in the Korean population. In the study process, the concept has been developed from the user's point of view in order that the white cane becomes a real help in the walking step of the visually impaired and the improvement of usability of the white cane, the main walking equipment for the visually impaired, are done by problem identification through the Double Diamond Model of Design Thinking (Empathize → Define → Ideate → Prototype → Test (verify)). As a result of the investigation in the process of Empathy, a total of five issues was synthesized, including an increase in the proportion of the visually impaired people, an insufficient workforce situation to help all the visually impaired, an improvement and advancement of assistive devices essential for the visually impaired, problems of damage, illegal occupation, demolition, maintenance about braille blocks, making braille block paradigms for the visually impaired and for everyone. In Ideate and Prototype steps, situations derived from brainstorming were grouped and the relationship were made through the KJ method, and specific situations and major causes were organized to establish the direction of the concept. The derived solutions and major functions are defined in four categories, and representative situations requiring solutions and major functions are organized into two user scenarios. Ideas were visualized by arranging the virtual Persona and Customer Journey Map according to the situation and producing a prototype through 3D modeling. Finally, in the evaluation, the final concept derived is a device such a smart cane for guidance for the visually impaired as ① a smart cane emphasizing portability + ② compatibility with other electronic devices + ③ a product with safety and convenience.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.1
• /
• pp.82-108
• /
• 2024

With the transition of archaeological recording method's transition from analog to digital, the 3D scanning technology has been actively adopted within the field. Research on the digital archaeological digital data gathered from 3D scanning and photogrammetry is continuously being conducted. However, due to cost and manpower issues, most buried cultural heritage organizations are hesitating to adopt such digital technology. This paper aims to present a digital recording method of relics utilizing open-source software and photogrammetry technology, which is believed to be the most efficient method among 3D scanning methods. The digital recording process of relics consists of three stages: acquiring a 3D model, creating a joining map with the edited 3D model, and creating an digital drawing. In order to enhance the accessibility, this method only utilizes open-source software throughout the entire process. The results of this study confirms that in terms of quantitative evaluation, the deviation of numerical measurement between the actual artifact and the 3D model was minimal. In addition, the results of quantitative quality analysis from the open-source software and the commercial software showed high similarity. However, the data processing time was overwhelmingly fast for commercial software, which is believed to be a result of high computational speed from the improved algorithm. In qualitative evaluation, some differences in mesh and texture quality occurred. In the 3D model generated by opensource software, following problems occurred: noise on the mesh surface, harsh surface of the mesh, and difficulty in confirming the production marks of relics and the expression of patterns. However, some of the open source software did generate the quality comparable to that of commercial software in quantitative and qualitative evaluations. Open-source software for editing 3D models was able to not only post-process, match, and merge the 3D model, but also scale adjustment, join surface production, and render image necessary for the actual measurement of relics. The final completed drawing was tracked by the CAD program, which is also an open-source software. In archaeological research, photogrammetry is very applicable to various processes, including excavation, writing reports, and research on numerical data from 3D models. With the breakthrough development of computer vision, the types of open-source software have been diversified and the performance has significantly improved. With the high accessibility to such digital technology, the acquisition of 3D model data in archaeology will be used as basic data for preservation and active research of cultural heritage.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2551-2562
• /
• 2013

Since 2006, an Intelligent Excavation Robot which automatically performs the earth-work without operator has been developed in Korea. The technologies for automatically recognizing the terrain of work environment and detecting the objects such as obstacles or dump trucks are essential for its work quality and safety. In several countries, terrestrial 3D laser scanner and stereo vision camera have been used to model the local area around workspace of the automated construction equipment. However, these attempts have some problems that require high cost to make the sensor system or long processing time to eliminate the noise from 3D model outcome. The objectives of this study are to analyze the advantages of the existing 3D modeling sensors and to examine the applicability for practical use by using Analytic Hierarchical Process(AHP). In this study, 3D modeling quality and accuracy of modeling sensors were tested at the real earth-work environment.

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.59-72
• /
• 2012

The police, as an advance guard for performing governmental functions, should conduct their duties to protect lives, physical bodies, and properties in the nation against various kinds of crimes, prevent from a public risk by detecting a factor that can menace public safeguard and public order and suppress it when a risk factor occurs. Practically it is impossible to protect lives, physical bodies, and properties in the nationprovided that social stability is not taken as security. The roles of the criminal investigation police that take a countermeasure to prevent a risk in prior by detecting hindrance factor of social stability and process any occurred crime in conformity with pertinent laws could control a successful performance in each of the police activities themselves. The study assumes that the organizational capabilities of the criminal investigation police exercises a significant influence upon organizational concentration. In spite of the fact that it is natural that the organizational capabilities of the criminal investigation police exercises a significant influence upon organizational concentration, until now it is very deficient in studies of this field. It is a viewpoint that an organizational concentration would be improved when a capability of the organizational staff will be improved, they would have a targeting capability for sharing organizational goals and vision and a systematic capability would be supported by the dimension of the criminal investigation police. The study was aimed to deduce a developmental method for the criminal investigation police by conducting an analysis on the impact of the organizational capabilities of the criminal investigation police upon organizational concentration that it suggest method that the criminal investigation police will make a contribution for maintaining a social order.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.6
• /
• pp.117-126
• /
• 2010

In the case of failure images with controlling lighting like backlighting and excessive frontlinghting, the compensation scheme for a specific area in an image is required. The interested region is first selected by user in our method to compensate the first frame. Then we define the matching function of brightness and energy function is proposed with weight of matching function and the relationship among the neighbors. Finally, the energy is minimized by the graph-cut algorithm to compensate the brightness of the first frame. Other frames are straightforwardly compensated using the results of the first frame. The brightness variations of the previous frame is transmitted to the next frame via motion vectors. The reliability of the brightness variation is calculated based on the motion vector reliability. Video compensation result is achieved by the process of the image case. Simulation show that the proposed algorithm provides more natural results than the conventional algorithms.

• Industry Promotion Research
• /
• v.5 no.3
• /
• pp.145-155
• /
• 2020

Co-operatives are a deep-rooted organization that was first organized in Britain in the 19th century and spread to Europe and North America in the early 20th century and to the rest of the world from the mid-20th century. Cooperative in Italy are fraternal (friendly societies) separated from religion, and in the early days of socialism and the late 19th century Catholic Italy, but independent of activity. And the Church's social participation, as well as multiple personalities. Therefore, the purpose of this study is to study the laws and institutions of Italian cooperatives. And let's look at how the laws and systems of Italian co-operatives support society and the national economy. Specifically, firstly, based on prior research, the concept of co-operatives and the cooperative movement and social values are considered. Second, review the development process and characteristics of Italian co-operatives and the legal system. Third, I would like to analyze the case of Italian co-operatives. Fourth, suggest implications according to the results of the study. The results of the study suggested the following. First, the attitude such as attachment and sincerity of representatives and staff of village enterprises is very important. Second, all members of the organization should participate in decision making with empathy and attachment to the vision of the village enterprise. Third, it should be highly likely that village enterprises, which can draw capital from outside according to the needs of the organization, will generate higher economic results. Fourth, it is important to establish a model of mind enterprise by presenting factors and success factors in establishing a village enterprise based on cases and theories. In conclusion, Co-operatives should contribute to social contribution rather than economic profit-seeking.

• Journal of the Korean Society of Costume
• /
• v.66 no.6
• /
• pp.95-109
• /
• 2016

The process of making fashion accessories brings many benefits to visually impaired people. It helps the development of their tactile sensation, improves their aesthetic attitude, creativity, and imagination, and brings energy to their life. The current accessory making education in Korea is targeted to people with normal vision, and does not reflect the specific needs of the visually impaired. This causes a lot of trouble in educating the visually impaired. Therefore, this study aims to increase the efficiency of accessory making education by selecting curriculum and material that are appropriate and systematic for the visually impaired. In order to understand visual impairment, literature review was conducted to examine the definition and classifications of the impairment. Research was also done regarding material types and production method of fashion accessory. The study also designed an education program, including teaching guidelines, by referring to literature related to fashion accessory design, teaching guideline. The study conducted 12 experiments based on the results from April to June 2014. After revising and supplementing the teaching method, 2nd set of experiments were conducted from July to September 2014. Each class lasted for one and a half hour every week, and the class was composed of 6 students, 1 instructor and 1 volunteer. After each class, interviews were done to collect student opinions about the curriculum and material. Total experiment results and interview were reflected in constructing the final education program. The result of the experiments and interviews showed that selecting the accessory materials for class must be selected carefully. The visually-impaired students were very sensitive to the size, texture, shape, hole size of beads and length of material. After the experiments, all the students were able to distinguish the size and shape of the beads well, and finished the accessories using the given materials. The study verified that there is a need for another approach when educating the visually impaired about fashion accessory design. Many factors need to be considered from selecting materials to class contents. This study will contribute as a reference to fashion accessory making education as well as other design education for the visually impaired.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.1
• /
• pp.116-121
• /
• 2010

Long-chain polyunsaturated fatty acids (LC-PUFA) promote the development of brain and vision of the fetus, relieve inflammation, inhibit oral dysplasia of rumor cell, decrease the incidence of cardiovascular disease and regulate arrhythmia. ${\Delta}-6$ desaturase is the rate-limited enzyme in the desaturation process. This study reports the cloning, characterization and tissue expression of a ${\Delta}-6$ desaturase gene in the chicken. PCR primers were designed based on the predicted sequence of chicken ${\Delta}-6$ desaturase (accession number: XM421053) and used to isolate a cDNA fragment of 1,323 bp from chicken liver. Based on the 1,323 bp fragment an EST (BI390105) was obtained by BLAST. The EST and 5'nd of the 1,323 bp fragment were partially overlapped. Gene specific primers derived from the EST were used for amplification of the 5'nd. Another gene-specific primer derived from the 1,323 bp fragment was used for amplification of the 3'nd by 3'ACE. Then the three overlapping cDNA sequences obtained were assembled with DNAMAN software and a full-length ${\Delta}-6$ desaturase of 2,153 bp was obtained. The full-length cDNA contained an ORF of 1,335 bp with a 5'ntranslated region of 147 nucleotides followed by an ATG initiation codon. Stop codon TGA was at position 1,481-1,483 bp. The deduced amino acids shared an homology above 77% with bovine, mice, orangutan, rat and human. The protein sequence had three histidine-rich regions HDFGH (HisI region), HFQHH (HisII region) and HH (HisIII region), a cytochrome $b_{5}$-like domain containing a heme-binding motif and two transmembrane domains. Sequence analysis of the chicken genomic DNA revealed that the coding sequence of chicken ${\Delta}-6$ desaturase included 12 exons and 11 introns. Semi-quantitative RT-PCR showed that the ${\Delta}-6$ desaturase expression levels were in turn liver, spleen, pancreas, lung, breast muscle, heart, and abdominal fat. The expression of ${\Delta}-6$ desaturase in liver was significantly higher than that in breast muscle (p<0.01). The expression of ${\Delta}-6$ desaturase in lung was significantly higher than that in abdominal fat (p<0.01). This is the first clone of chicken ${\Delta}-6$ desaturase.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.1
• /
• pp.19-28
• /
• 2013

This study emphasize the importance of founder having knowledge on detecting entrepreneurship opportunities and analyzed how the founder detects such opportunity using what process. I used people who have found and established a company on own as a survey sample. The result is like the following. First, it's found that most founders had business motivation before the establishment and used skills and knowhow from related area of business for their business establishment that led to the comparably safe business. Second, founders were highly motivated in advance of business establishment and it is found that their chance of establishment was not from the coincidence. Third, it is also found that people had pre-education on business establishment was very on purpose and those who had not had any education had a high chance of coincidence in the establishment. Fourth, it is found that higher the desire for the business achievement, more likely that the founder's business establishment was a plan. Fifth, it is found that higher the awareness of business opportunity and vision, more likely that the founder's business establishment was on plan.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2004.06a
• /
• pp.60-61
• /
• 2004

Metabolic engineering is now a well established discipline, used extensively to determine and execute rational strategies of strain development to improve the performance of micro-organisms employed in industrial fermentations. The basic principle of this approach is that performance of the microbial catalyst should be adequately characterised metabolically so as to clearlyidentify the metabolic network constraints, thereby identifying the most probable targets for genetic engineering and the extent to which improvements can be realistically achieved. In order to harness correctly this potential, it is clear that the physiological analysis of each strain studied needs to be undertaken under conditions as close as possible to the physico-chemical environment in which the strain evolves within the full-scale process. Furthermore, this analysis needs to be undertaken throughoutthe entire fermentation so as to take into account the changing environment in an essentially dynamic situation in which metabolic stress is accentuated by the microbial activity itself, leading to increasingly important stress response at a metabolic level. All too often these industrial fermentation constraints are overlooked, leading to identification of targets whose validity within the industrial context is at best limited. Thus the conceptual error is linked to experimental design rather than inadequate methodology. New tools are becoming available which open up new possibilities in metabolic engineering and the characterisation of complex metabolic networks. Traditionally metabolic analysis was targeted towards pre-identified genes and their corresponding enzymatic activities within pre-selected metabolic pathways. Those pathways not included at the onset were intrinsically removed from the network giving a fundamentally localised vision of pathway functionality. New tools from genome research extend this reductive approach so as to include the global characteristics of a given biological model which can now be seen as an integrated functional unit rather than a specific sub-group of biochemical reactions, thereby facilitating the resolution of complexnetworks whose exact composition cannot be estimated at the onset. This global overview of whole cell physiology enables new targets to be identified which would classically not have been suspected previously. Of course, as with all powerful analytical tools, post-genomic technology must be used carefully so as to avoid expensive errors. This is not always the case and the data obtained need to be examined carefully to avoid embarking on the study of artefacts due to poor understanding of cell biology. These basic developments and the underlying concepts will be illustrated with examples from the author's laboratory concerning the industrial production of commodity chemicals using a number of industrially important bacteria. The different levels of possibleinvestigation and the extent to which the data can be extrapolated will be highlighted together with the extent to which realistic yield targets can be attained. Genetic engineering strategies and the performance of the resulting strains will be examined within the context of the prevailing experimental conditions encountered in the industrial fermentor. Examples used will include the production of amino acids, vitamins and polysaccharides. In each case metabolic constraints can be identified and the extent to which performance can be enhanced predicted