• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.710-714
• /
• 1998

Organic electroluminescence devices (ELD) with hetero-junction structure were fabricated utilizing poly(p-phenylne vinylene) (PPV) as emitting layer and electron transport layer (ETL). 2-(4-biphenyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD) was used as an electron transport agent. Copolymers with stilbene type comonomers, such as poly(styrene-co-PVTS), poly(styrene-co-MeO-PVTS) and poly(styrene-co-MeO-ST) were synthesized to be used as a matrix polymer to disperse electron transport agent (PBD). Among the hetero-junction EL devices fabricated with the above materials, the device with poly(styrene-co-PVTS) as matrix polymer for ETL gave the highest luminance ($120.7cd/m^2$, 13 V). EL devices made with poly(styrene-co-MeO-PVTS) or poly(styrene-co-MeO-ST) matrix exhibited lower luminance than the one with polystyrene matrix and the single layer EL (ITO/PPV/Mg) device.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.05a
• /
• pp.408-411
• /
• 2003

PPV(Positive Pressure Ventilation)란 화재진압시 송풍기를 이용하여 화염이 발생한 구조물 내부로 신선한 공기를 유입시켜 내부압력을 상승시키는 방식으로서, 구조물 내부의 전체 영역에 균일하게 열ㆍ연기 및 연소 생성물 등의 급속 배기 및 구조물 내부온도를 급속히 감소시킬 수 있는 것이 특징이다.(중략)

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.227.1-227
• /
• 2003

• Korean Journal of Veterinary Research
• /
• v.47 no.2
• /
• pp.175-185
• /
• 2007

This study was carried out to investigate the pathogenesis and pathogenicity of the porcine circovirus type 2 (PCV2) Korean isolate from weaned pigs. Twenty four weaned pigs, PCV2, porcine reproductive and respiratory syndrome virus (PRRSV) and porcine parvovirus (PPV) antibodies free, were allocated to 4 groups (n = 6). Six pigs were inoculated intranasally with PCV2 alone, 6 with PCV2 and PRRSV, 6 with the combined PCV2/PRRSV/PPV inoculum, and 6 were remained as a uninoculated negative control. Pigs were killed 3 and 6 weeks after inoculation and tissue samples examined for gross and microscopic lesions and for the presence of PCV2 antigens and nucleic acids. Experimentally inoculated pigs were evaluated for 3 considerations: 1. development of postweaning multisystemic wasting syndrome (PMWS), 2. distribution of viral antigens by immunohistochemistry and polymerase chain reaction (PCR), and 3. cytokine mRNA levels in lymph nodes. Pigs inoculated with PCV2/PRRSV/PPV showed typical clinical signs, gross findings, and histopathologic characteristics of PMWS. In the PCV2/PRRSV/PPV inoculated group, the PCV2 antigen was widely distributed in various parenchymal organs such as brain, spinal cord, tonsil, lymph nodes, lung, heart, liver, kidney, spleen, and peyer's patch. Lymph node mRNA expression of IL-$1{\alpha}$, IL-2R and IL-8 was determined by real-time PCR. The pigs of PCV2/PRRSV and PCV2/PRRSV/PPV inoculation group, the mRNA expression was characterized by a decrease of IL-$1{\alpha}$, IL-2R and IL-8. The decrease of cytokine mRNA represent the state of T cell immuno-suppression in pig, and nicely support the evidence for the impairment of immune system in pigs with PMWS. In conclusion, PCV2 infection and some additional infectious causes such as PRRSV and/or PPV are warranted for the presence of PMWS in weaned pigs in Korea.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.464-468
• /
• 2012

Three solvent systems, chlorobenzene (ink 1), chlorobenzene/o-dichlorobenzene (ink 2) and chlorobenzene/tetrahydronaphthalene (ink 3), were compared as printable inks for the fabrication of polymer light-emitting diodes (PLEDs) using poly[2-methoxy-5-(2-ethylhexyl-oxyl)-1,4-phenylenevinylene (MEH-PPV) as an emissive material and an inkjet printer (Fujifilm Dimatix DMP-2831). Ink 1 clogged the printer's nozzle and gave non-uniform film. Inks 2 and 3 were used to fabricate PLEDs with ITO/PEDOT:PSS/MEH-PPV/LiF/Al configurations. The best performance (turn-on voltage, 3.5 V; luminance efficiency, 0.17 cd/A; luminance, 1,800 cd/m) was obtained when ink 3 was used to form the emissive layer (thickness, 49 nm), attributable to the better morphology and suitable thickness of the MEH-PPV layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.510-510
• /
• 2013

탄소나노튜브를 발광층에 첨가하여 Alternating current (AC) 방식으로 구동되는 고분자유기물 소자를 제작하였다. 고분자유기물 소자는 ITO가 코팅된 유리기판을 사용하였으며, 전극으로는 ITO와Al을 사용하고 cyanoethyl pullulan (CRS)의 유전물질과 탄소나노튜브를 함유한 poly[2-methoxy-z5-(2-ethyl-hexyloxy)-1,4-phenylene-vinylene](MEH-PPV) 고분자유기발광물질을 이용하여 4개의 층(ITO/CRS/탄소나노튜브를 함유한 MEH-PPV/Al)으로 고분자유기물 소자를 구성하였다. 소자는 ITO가 코팅된 유리 기판 위에 CRS의 유전층과 탄소나노튜브를 함유한 MEH-PPV의 발광층은 스핀코우터를 이용하여 증착하였으며, Al은 thermal evaporator을 이용하여 증착하였다. 본 연구에서는 AC 방식 고분자유기물 소자에 탄소나노튜브의 함유량을 변경하면서 전압과 전류 특성을 관찰하여 탄소나노튜브가 함유된 소자가 저 전류 구동이 가능한 것을 확인하였으며, 탄소나노튜브를 통한 micro-capacitance 효과의 확인 및 percolation과의 상관관계를 알아보았다. AC 고분자유기물 소자는 가정에서 사용되는 AC전원을 바로 사용할 수 있는 범용성을 가지고 있으며, 탄소나노튜브를 발광층에 첨가함으로 낮은 소비전력으로 고분자유기물 소자를 구동 할 수 있는 장점으로 차세대 디스플레이나 조명으로 그 쓰임새를 기대해본다.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.4
• /
• pp.79-83
• /
• 2011

White phosphorescence polymer light emitting diodes (WPhPLEDs) with a glass/ITO/PEDOT:PSS/PFO:$Ir(ppy)_3$:MDMO-PPV/TPBI/LiF/Al structure were fabricated to investigate the effects of $Ir(ppy)_3$ doping concentrations on the optical and electrical properties of the devices. PFO, $Ir(ppy)_3$ and MDMO-PPV conjugated polymers as host and guest materials in the emission layer were spin coated at various concentrations of $Ir(ppy)_3$ ranging from 0.0 to 20.0 vol.%. As the concentration of $Ir(ppy)_3$ increased from 5.0 to 20.0 vol.%, the luminance and current efficiency values of the devices decreased clearly, which are attributable to the quenching effect at a high doping concentration. The maximum luminance and current density were 2850 $cd/m^2$ and 741 $mA/cm^2$, respectively for a WPhPLED with an $Ir(ppy)_3$ concentration of 5.0 vol.%. The CIE color coordinates were about x=0.33 and y=0.34 at 11V, showing a good white color.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.336-339
• /
• 2002

Fluorenevinylene-based EL polymers, poly(9,9-dioctylfluorene-2,7-vinylene) (PFV) and poly[(9,9-dioctylfluorene-2,7-vinylene)-co-{2-methoxy-5-(2 ethylhexyloxy)-1,4-phenylenevinylene}] (PFV-co-MEH-PPV), have been synthesized by Gilch polymerization method. The resulting polymers were soluble in common organic solvents and easily spin cast onto the indium-tin oxide (ITO) substrate. The weight average molecular weight and polydispersity of PFV and PFV-co-MEH-PPV were in the range of 22.2 - 43.2 x $10^4$ and 1.9 - 3.0, respectively. Double-layer light-emitting diodes with ITO/PEDOT/Polymer/Al configuration were fabricated. PFV-co-MEH-PPV showed better EL properties than those of PFV and MEH-PPV The turn-on voltage of poly(9,9dialkylfluorene) derivatives were dramatically decreased to the 2.5 V compared to fluorene-based EL polymers. The maximum brightness and luminescence efficiency were up 7 to 1350 cd/$m^2$ and 0.51 Cd/A.

• Smart Structures and Systems
• /
• v.21 no.5
• /
• pp.561-569
• /
• 2018

Ground vibration is one of the most undesirable effects induced by blast operation in mountain tunnels, which could cause negative impacts on the residents living nearby and adjacent structures. The ground vibration effects can be well represented by peak particle velocity (PPV) and corner frequency ($f_c$) on the ground. In this research, the PPV and the corner frequency of the mountain surface above the large-span tunnel of the new Badaling tunnel are observed by using the microseismic monitoring technique. A total of 53 sets of monitoring results caused by the blast inside tunnel are recorded. It is found that the measured values of PPV are lower than the allowable value. The measured values of corner frequency are greater than the natural frequencies of the Great Wall, which will not produce resonant vibration of the Great Wall. The vibration effects of associated parameters on the PPV and corner frequency which include blast charge, rock mass condition, and distance from the blast point to mountain surface, are studied by regression analysis. Empirical formulas are proposed to predict the PPV and the corner frequency of the Great Wall and surface structures due to blast, which can be used to determine the suitable blast charge inside the tunnel.

• Macromolecular Research
• /
• v.17 no.2
• /
• pp.91-98
• /
• 2009

Conjugated PPV-derived block copolymers containing 2-ethylhexyloxynaphthalene unit were synthesized and characterized in this study. The resulting polymers were soluble in common organic solvents and showed good thermal stabilities, The weight-average molecular weights ($M_w$) of the copolymers ranged from 246,000 to 475,000 with PDIs of $1.3{\sim}2.1$. The optical properties of these polymers, measured both in a chloroform solution and on a film, showed a maximum absorption at $405{\sim}476\;nm$ for Copolymers $I{\sim}VIII$. In the PL spectra, Copolymers $I{\sim}VIII$ showed maximum peaks at $510{\sim}566\;nm$. The HOMOs, LUMOs and band gaps of the PPV derivatives of Copolymers $I{\sim}VIII$ were $5.30{\sim}5.77$, $3.04{\sim}3.24$, and $2.5{\sim}2.2\;eV$, respectively, The multi-layered, light-emitting diodes of ITO/PEDOT/copolymers/LiF/Al exhibited turn-on voltages of $6{\sim}2.5\;V$ Copolymer VIII exhibited the maximum brightness of $3.657\;cd/m^2$. Particularly, Copolymer VII, with an identical composition of MEH-PPV and naphthalene-PPV, showed a maximum luminance efficiency and power efficiency of 2,63 cd/A and 1.06 lm/W, respectively.