• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.299-303
• /
• 2005

A lighting control switch, extended to incorporate a power line communication technology, is developed. The system uses not an exclusive microprocessor but a general one, and developed PPM protocol. The coupling circuit is a type of an isolation LC filter, and the impedance of the circuit was designed as low as possible to extend signal transmission distance. The frequency of the carrier, considering the data length and signal attenuation as the length of power lines, was set at 250 kHz. Tests on a prototype in an indoor power lines have shown that the switch has a stable operation with the distance of power lines

• 한국대기환경학회지
• /
• 제6권1호
• /
• pp.97-102
• /
• 1990

A pilot field study was conducted to measure indoor and personal exposure to carbon monoxide (CO) levels using personal monitors from January to February in 1989. The principal objectives of the study was to design and evaluate the research protocol and the instrumentation performance for application to the conduct of a large-scale personal monitoring program. The mean CO concentrations in kitchen and in bedroom were 23.4 and 11.9 ppm, respectively, while mean concentration of personal CO exposure was 18.9 ppm. It was found that the mean CO concentrations in kitchen exceeded 20 ppm of the Korea ambient CO standard(8-hr average) not to be exceeded more than three times per year. The results suggest that indoor CO levels in Korean houses appear to be affected by use of coal briquette for heating any cooking.

• 한국산업보건학회지
• /
• 제29권3호
• /
• pp.336-342
• /
• 2019

Introduction: An unexpected death was reported in a beginner immediately after starting the work at a plating factory. After the incident, air sampling was performed using a simulation of the situation as it had been at the time. Methods: To evaluate the airborne concentration of hydrogen cyanide, a total of six samples were collected: one personal sample, three area samples, and two background samples (office and outdoors). Hydrogen cyanide measurement was performed according to the standard sampling protocol recommended by the U.S. NIOSH (National Institute of Occupational Safety and Health). Results: The highest concentration of hydrogen cyanide was 0.938 ppm measured in a sample collected from the plating bath area with local exhaust ventilation. This value was approximately 20% of the ceiling occupational exposure limit. The personal sample showed a concentration of 0.135 ppm. Samples collected near the bath in which the incident occurred and a dehydrator showed hydrogen cyanide concentrations of 0.236 ppm and 0.101 ppm, respectively. Hydrogen cyanide was not detected in the background samples (office and outdoors). Conclusions: It is necessary to use proper ventilation systems and respirators in plating factories to prevent acute poisoning. Furthermore, it is important to educate and train new workers dealing with toxic substances.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.281-284
• /
• 2005

본 논문은 홈오토메이션 구축에 있어 손쉽게 적용할 수 있는 전력선 통신기술을 이용한 조명제어 스위치 개발에 관하여 기술하였다. 전력선 통신기술을 이용한 조명제어 스위치는 송신기 및 수신기로 구성되며, 저가로 구현하기 위하여 기존에 개발되어 있는 통신 프로토콜을 이용하지 않고, 별도의 송수신 프로토콜을 개발하여 적용하였다. 개발된 조명제어 스위치에서 전력선 통신신호의 거리에 대한 감쇠특성, 부하에 따른 특성 변화 등을 고려하여 커플링 회로에 대한 이론적, 실험적 특성평가를 수행하였으며, 실험결과로부터 매우 안정적인 동작특성을 확인하였다.

• 한국식품저장유통학회지
• /
• 제15권2호
• /
• pp.236-242
• /
• 2008

이산화염소수 발생 최적조건을 검토하기 위하여 생성원료인 $NaClO_2$ 농도(0.01-0.1%)와 $Cl_2$ gas 투입량(100-1,000 g/hr)에 따른 chlorite, chlorate, FAC 및 chlorine dioxide의 생성량을 조사하였다. Chlorate, FAC 및 chloride dioxide 생성량은 $NaClO_2$ 및 $Cl_2$ 투입량이 증가할 수록 생성량이 증가하는 경향을 나타내었다. 이산화염소수 최적 생성조건은 0.1% $NaClO_2$, 900 g/hr $Cl_2$ gas 농도였으며 발생한 이산화염소수의 $ClO_2$는 882 ppm, FAC는 8.0 ppm, chlorite는 검출되지 않았고 chlorate는 43.32 ppm이었다. 이때의 수율과 순도는 각각 97.0%, 96.0%였다. 상추, 치콘, 깻잎, 케일의 채소류에 대한 세정 침지 살균에서는 이산화염소수 농도의존성 감균 효과를 나타내어 3-4 log의 총균수 감소 효과가 있었다. 과일의 경우에도 농도 의존성 감균 효과는 동일하였으며 대략 3-5 log의 총균수 감균 효과가 있었다.

• 한국수산과학회지
• /
• 제38권6호
• /
• pp.372-378
• /
• 2005

An analysis method of tetracyclines far fish and shellfish products containing large amount of low molecular materials and pigments was established. The recovery of the established analysis method for four tetracycline samples was $72-100\%$ and higher than other methods reported. Especially, proposed sample treatment protocol was shown to be effective for the removal of low molecular materials and pigments that tend to interfere with accurate analysis. The detection limit of oxytetracycline (OTC) and tetracycline (TC) from the sample was 0.02 ppm, and the detection limit of chlortetracycline (CTC) and doxycycline (DC) from the sample was 0.1ppm, To examine the efficiency of the established method and identify tetracycline usage in fish farms, tetracycline group antibiotics in the flounder being cultured was monitored. The improved method can be used for fish and shellfish products effectively and all surveyed fish farms have used tetracycline all the year round. The proposed method was adopted as official method for fishery products by Korean Food and Drug Administration in 2003 and it is being used by regulatory authority as National Fishery Products Quality Inspection Service.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVII)
• /
• pp.456-462
• /
• 2005

The objective of this study was to develop a removal process by which $H_2S$ could be biologically removed from the odoriferous gases generated in the waste food recycling process. In order to develop this process we were first required to select a proper biofilter support protocol. When the selected biofilter equipment was then tested suing a synthetic odoriferous gas containing 600 ppm of $H_2S$, we noted a maximal removal rate of 658 $g-H_2S/m^3{\cdot}hr$, using polypropylene fibrils as supporting materials. Under identical experimental conditions, we obtained a value of 411.2 $g-H_2S/m^3{\cdot}hr$, using polyurethane as a support material. We also conducted a trial in which volcanic stone was utilized as a support material, and in this trial, we logged a maximal 105.1 $g-H_2S/m^3{\cdot}hr$ removal rate. As the result of our experiments, we concluded that polypropylene fibrils constituted the ideal material for the removal of $H_2S$ gas via biological treatment.

• 한국정보통신학회논문지
• /
• 제9권4호
• /
• pp.792-797
• /
• 2005

본 논문에서는 전력선 통신과 조광 기술을 기반으로 에너지 절약과 적정 조도의 제어가 가능한 조명제어 스위치의 개발에 대하여 기술하였다. 개발된 스위치는 범용의 마이크로프로세서와 주변 전자기술을 이용하며, 하나의 마이크로프로세서로 전력선 통신과 조광기능을 구현함으로서 저가격 상용화가 가능하였다. 캐리어 주파수는 전송 데이터 길이와 신호감쇄를 고려하여 250kHz로 설정하였다. 저압선로에서 시제작품에 대한 시험결과, 본 스위치는 전력선의 길이와 부하용량의 변동에 대해 강인하게 동작하는 것을 확인하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제18권E4호
• /
• pp.181-190
• /
• 2002

A novel portable device for the direct measurement of alveolar breath carbon monoxide (CO) was developed. The major components of the device include a mouthpiece, non-rebreathing two-way valve, Teflon tube, and CO dosimeter. An alveolar CO measurement can be completed within 1.5 min when using the proposed device and measurement protocol. Measurements could be read to the nearest 0.1 ppm. Humidity did not influence the CO measurements taken by the CO dosimeter, plus there were no problems associated with the recovery and carryover of CO through the device. The criterion for significance in statistical analyses was p< 0.05. The average recovery was 103 and 99% for recovery and carryover experiments, respectively. Test results using the proposed alveolar CO measurement system reflected a good reproducibility. This reproducibility was also supported by the finding that the relative standard deviations (RSDs) of the data sets were less than 7％ for the loss experiment and less than 8% for the carryover experiment. Consequently, it would appear that the proposed device can be effectively applied to measure CO levels found in breath, thereby overcoming several disadvantages associated with the conventional bag and adsorbent tube sampling methods.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.179-185
• /
• 2017

Communication technologies hold a significant place in the swarm flight of drones for surveillance, inspection of disasters and calamities, entertainment performances, and drone collaborations. A GCS(ground control station) for the control of drone swarms needs its devoted communication method to control a large number of drones at the same time. General drone controllers control drones by connecting transmitters and drones in 1:1. When such an old communication method is employed to control many drones simultaneously, problems can emerge with the control of many transmitter modules connected to a GCS and frequency interference among them. This study implemented a transmitter controller to control many drones simultaneously with a communication chip of 2.4GHz ISM band and a Cortex M4-based board. It also designed a GCS to control many transmitter controllers via a network. The hierarchical method made it possible to control many more drones. In addition, the problem with frequency interference was resolved by implementing a time- and frequency-sharing method, controlling many drones simultaneously, and adding the frequency hopping feature. If PPM and S.BUS protocol features are added to it, it will be compatible with more diverse transmitters and drones.