• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.10a
• /
• pp.150-155
• /
• 1993

The use of polypropylene fibers in concrete has been widely advertised by the fiber manufacturers. However, the behavior of concrete containing plastic fibers has not been fully understood. The effects of fiber on concrete have been forcused on shrinkage crack control mainly from field observation, and the mechanism and the side effect of fiber such as workability reduction have been neglicted. In this paper, the effect of fiber on workability and shrinkage properties have been studied. The addition of fiber significantly reduce workability and requires additional water to maintain the workability, which causes adversal effects on concrete properties.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.725-728
• /
• 1988

Image restoration technique using dual sensor is presented in this paper. Digital Radiography image (1024xlO24) is obtained by conventional resolution sensor. We also obtain local DR image data by high resolution sensor. Two dimensional maximum entropy power spectrum estimation (2-D ME PSE) is applied to low resolution image and high resolution image for the purpose of the power spectrum estimation of each image. A class of linear algebraic restoration filter, parametric projection filter (PPF), is derived from the power spectrums of each image. It is shown that the noise energy may be considerably reduced through the PPF.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.135-135
• /
• 2012

세계 환경유해물질 규제에 대응하여 반도체 substrate의 Pb-free solution의 일환으로 등장한 PPF (Pre-Plated Frame)는 패키지공정 조립성은 물론, 자동차 반도체와 같은 고 신뢰성 및 low cost 요구를 만족하기 위해 초박막 고품질의 도금층과 Sub-micro scale의 rough treatment 와 같은 미세 표면제어 기술, 그리고 Au wire로부터 Cu wire 로의 전환에 대응하는 최적화된 도금층 구조로 발전하고 있다. 이러한 기술적인 진화를 거듭해온 이 기술은 다양한 반도체 substrate에 광범위하게 사용될 수 있기 때문에 향후 PPF기술의 활용저변은 더욱 확대될 전망이다.

• BMB Reports
• /
• v.34 no.4
• /
• pp.293-298
• /
• 2001

Tryptic activation of the 130-kDa Bacillus thuringiensis Cry4B $\delta$-endotoxin produced protease-resistant products of ca. 47 kDa and ca. 21 kDa. The 21-kDa fragment was identified as the N-terminal five-helix bundle (${\alpha}1-{\alpha}5$,) which is a potential candidate for membrane insertion and pore formation. In this study, we constructed the recombinant clone over-expressing this putative pore-forming (PPF) fragment as inclusion bodies in Escherichia coli. The partially purified inclusions were composed of a 23-kDa protein, which cross-reacted with Cry4B antibodies, and whose N-terminus was identical to that of the 130-kDa protein. Dissimilar to protoxin inclusions, the PPF inclusions were only soluble when the carbonate buffer, pH 9.0, was supplemented with 6 M urea. After renaturation via a stepwise dialysis, the refolded PPF protein appeared to exist as an oligomer and was structurally stable upon trypsin treatment. Unlike the 130kDa protoxin, the refolded protein was able to release entrapped glucose from liposomes, and showed comparable activity to the full-length activated toxin, although it lacks larvicidal activity These results, therefore, support the notion that the PPF fragment that consists of ${\alpha}1-{\alpha}5$ of the activated Cry4B toxin is involved in membrane pore-formation.

• Journal of Biosystems Engineering
• /
• v.23 no.6
• /
• pp.591-598
• /
• 1998

Light intensity and spectral characteristics of different types of fluorescent lamps were tested to investigate their possibility as the artificial lighting sources for the close illumination applied in the transplant production factory. Photosynthetic photon flux densitiy(PPF), illuminance and irradiance for all lamps decreased logarithmically with an increase of the vertical distance from the lighting source. The fluorescent lamp specially designed plant growth (PG lamp) showed a maximum spectral irradiance at the wavelength of 660nm. However, it showed lower irradiance than that of a standard fluorescent lamp at the range of wavelength between 500 and 600nm. On the other hand, PG lamp showed higher PPF and lower illuminance than those of the standard fluorescent lamp. The maximum peak of spectral characteristics for both of the single and twin three-bind fluorescent lamps was shorn at the wavelength of 545m and the next peaks were shown at the wavelength of 610nm and 435nm, respectively. Since the red fluorescent lamp has a narrower peak at the wavelength of 660nm, it may be useful for the supplementary red lighting. For three of standard, single three-band and twin three-band fluorescent lamps, the values of conversion factor for converting illuminance to PPF fell within the narrow range from 76 to 791x/$\mu$molㆍm$^{-2}$ ㆍs$^{-l}$ . However, for PG lamp, it was 29.71x/$\mu$molㆍm$^{-2}$ ㆍs$^{-1}$. Also, the values of conversion factor for converting PPF to irradiance of fluorescent lamp used in this study ranged between 4.85 and 5.34$\mu$molㆍm$^{-2}$ ㆍs$^{-1}$/Wㆍm$^{-2}$ .

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.383-390
• /
• 2014

This study was conducted to investigate the growth characteristics of cucumber scion and pumpkin rootstock under different levels of light intensity (photosynthetic photon flux, PPF) and plug cell size in a closed transplant production system with artificial lighting. Cucumber scion and pumpkin rootstock seedlings were grown under the combinations of three levels of PPF (PPF 165, 248, and $313{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) and five types of plug tray (50, 72, 105, 128, and 200 cells in the tray) for nine days. The shoot dry weight and relative growth rate increased with increasing PPF and plug cell size. As PPF increased, cucumber scion and pumpkin rootstock seedlings had higher dry matter, lower specific leaf area, and lower hypocotyl length. The first true leaf of cucumber scion and pumpkin rootstock unfolded at eight and seven days after sowing, respectively, except the treatment using 200-cell plug tray. The unfolding of first true leaf of seedlings grown in 200-cell plug tray was delayed by one day. Accordingly, it was considered that the use of small cell size such as 200-cell plug tray would require more time for the production of scion and rootstock. Based on the results, we suggest that cucumber scion and pumpkin rootstock be grown in 105-cell to 128-cell plug tray for eight days and 72-cell to 105-cell plug tray for seven days, respectively, when using splice grafting method with root-removed rootstock. Additionally, higher PPF is suggested to improve the growth and quality of scion and rootstock.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.149-154
• /
• 2005

It is very important to make shorter and healthier pot plants with increased numbers of branch at a growing stage before short-day exposure. Especially light and nutrient conditions directly affect the growth and quality of the plants as described above. In this study, the effects of nutrient strength and light intensity on the nutrient uptake and growth of young Kalanchoe plants (Kalanchoe blossfeldiana 'Marlene') during this growth stage were investigated. The plants were grown under two radiation integral (15.8 and 7.9 $mol{\cdot}m^{-2}{\cdot}d^{-1}$, PPF) and three EC (0.8, 1.6 and 2.4 $dS{\cdot}m^{-1}$) conditions. Leaf area, fresh weight, dry weight and number of branch were higher at a higher PPF, and this tendency was more evident at an EC above 1.6$dS{\cdot}m^{-1}$. The plants became higher at a lower PPF. When the EC was at 0.8 $dS{\cdot}m^{-1}$, the plants did not grow so healthy regardless of PPF conditions. EC decrement in the nutrient solution was increased with increase of nutrient strength. With growth stage, the nutrient uptake was increased with increases of nutrient strength and PPF. At a higher PPF, $NO_3-N,\;K^{+}\;and\;Ca^{2+}$ were much more absorbed, and especially the uptake of $K^{+}$ was 1.1 to 1.5 times greater than that or $NO_3-N$. From the results, the EC needed above 1.6 $dS{\cdot}m^{-1}$ during the seedling stage in order to make more healthy Kalanchoe plants having more leaf area, fresh weight, dry weight and number of branches under adequate light conditions.

• Journal of Bio-Environment Control
• /
• v.14 no.4
• /
• pp.233-238
• /
• 2005

Growth of Campanula punctata 'Rubriflora' plantlets, as affected by three levels of photosynthetic photon flux (PPF), 70, 110, and $220{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, two levels of $CO_2$ concentration, 500 and $1,500{\mu}mol{\cdot}m^{-1}$, and two levels of number of air exchanges per hour (NAEH), 0.1 and $2.8 h^{-l}$, was studied. Explants were obtained from photomixotrophically-micropropagated plantlets. Four explants were planted in each $3.7{\times}10^{-4}m^3$ polycarbonate box containing MS basal medium and no added sucrose. Explants were cultured under cool-white fluorescent lamps for $16h{\cdot}d^{-1},\;at\;25\pm1^{\circ}C$ temperature, and $70\~80\%$ relative humidity In treatments of $2.8h^{-1}$ NAEH, a 10mm round hole made on the vessel cap was sealed with a microporous filter. For higher $CO_2$ concentrations in the culture room, $CO_2$ gas was provided from a tank of liquefied $CO_2$. Fresh and dry weights, length of the longest root, and number of leaves significantly increased with increasing PPF and especially $CO_2$ concentration. Length of the longest root, number of leaves, fresh and dry weights, and chlorophyll concentration were enhanced with increased NAEH. However, leaf area was the smallest in the $220{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}\;PPF\;2.8h^{-1}$ NAEH and especially, $1,500{\mu}mol{\cdot}mol^{-1}\;CO_2$ concentration treatment. Treatment effect became more produced with time. Overall, treatment with $220{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}\;PPF\;and\;1,500{\mu}mol{\cdot}mol^{-1}\;CO_2$ gave the most vigorous growth.

• Journal of Bio-Environment Control
• /
• v.27 no.3
• /
• pp.231-238
• /
• 2018

Chlorophyll fluorescence, chlorophyll content, graft-taking and growth of grafted cucumber seedlings as affected by photosynthetic photon flux (PPF) of LED lamps were analyzed in this study. Four PPF levels, namely 25, 50, 100, $150{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ were provided to investigate the effect of light intensity on the chlorophyll fluorescence, chlorophyll content, graft-taking and growth of grafted cucumber seedlings. Air temperature, relative humidity, and photoperiod for graft-taking were maintained at $25^{\circ}C$, 90%, $16h{\cdot}d^{-1}$, respectively. Maximum quantum yield (Fv/Fm) of rootstock as affected by PPF was found to be 0.84-0.85 and there was no significant change in Fv/Fm. Even though Fv/Fm of scion measured at 2 days after grafting was lowered to 0.81-0.82, after then it gradually increased with increasing PPF. At 4 days after grafting, the chlorophyll content extracted from scion increased with increasing PPF. Graft-taking ratio of grafted cucumber seedlings was 90-95% as PPF was ranged from $25{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ to $100{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. However, the graft-taking ratio of grafted seedlings healed under PPF of $150{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ was decreased to 80%. Maximum PPF measured required for smooth joining of rootstock and scion was assumed to be $100{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. At healing stage of grafted cucumber seedlings, Fv/Fm of scion decreased and at least two days after grafting were required for rooting of grafted seedlings. Chlorophyll fluorescence response of rootstock and scion was linked to light irradiation. Therefore, it was concluded that physical environment including light and humidity during healing process of grafted seedlings should be controlled more precisely to facilitate root formation and to prevent scion from lowering Fv/Fm. Further studies are required to investigate the effects of root development and joining of vascular bundles of grafted seedlings on the chlorophyll content of scion.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.3
• /
• pp.455-459
• /
• 1992

Five type of formulated diet from agricultural by-products (ABP) were fed to four breedtype of cattle in feedlot. The ABP used are palm kernel cake (PKC), palm press fibre (PPF), palm oil mill effluent (POME), cocoa pod (COP), coffee pulp (COF) and pineapple waste (PAP). The formulated diets are PS (52% PKC, 15% PPF and 30% POME), PF (57% PKC, 20% PPF and 20% POME), PA (2% PKC and 55% PAP), CO (42% PKC and 55% COP) and CF (67% PKC and 30% COF) with 1% urea, 1% NaCl and 1% vitamins premix. The cattle breedtypes are Kedah-Kelantan (KK), Brahman-KK (BK), Hereford-KK (HK) and Sahiwal-Friesian (SF). The result showed that breedtype significantly affect all the carcass characteristic except dressing percentage. Each breedtype has it's specific carcass characteristics. HK cattle gave high marbling, BK has high % of carcass bone, KK has high % of carcass meat and low % of carcass fat (lean meat type) and SF has high % of carcass fat. Diet-type significantly affect the deposition of fat in the carcass. High moisture diets (PA and CO) produced significantly higher % carcass bone, the lowest % carcass fat and the highest % carcass meat (65.3%). PF, CF, PA and CO diets produced 63.4%, 59.9%, 55.3% and 54.1% carcass meat respectively.