• Title/Summary/Keyword: POU

Search Result 55, Processing Time 0.036 seconds

Channeling of Intermediates Derived from Medium-Chain Fatty Acids and De novo-SYnthesized Fatty Acids to Polyhydroxyalkanoic Acid by 2-Bromooctanoic Acid in Pseudomonas fluorescens BM07

  • LEE, HO-JOO;RHO, JONG-KOOK;KAMBIZ AKBARI NOGHABI,;LEE, SEUNG-EUN;CHOI, MUN-HWAN;YOON, SUNG-CHUL
    • Journal of Microbiology and Biotechnology
    • /
    • v.14 no.6
    • /
    • pp.1256-1266
    • /
    • 2004
  • 2-Bromooctanoic acid (2-BrOA) is known to block the formation of polyhydroxyalkanoic acid (PHA) in Pseudomonasfluorescens BM07 without any influence on the cell growth when grown on fructose, but it inhibits the cell growth when grown on octanoate (OA) (Lee et al., Appl. Environ. Microbiol. 67: 4963- 4974, 2001). We investigated the role of 2-BrOA in the PHA synthesis of the bacterium grown with mixtures of fructose and fatty acids. OA, 11­phenoxyundecanoic acid (1 1-POU), and 5-phenylvaleric acid (5-PV) were selected as model substrates. When supplemented with 50 mM fructose, all these carboxylic acids suppressed the formation of PHA from fructose, however, the ~-oxidation coenzyme A monomers derived from the carboxylic acids were efficiently polymerized, but the conversion yield [(mol of carboxylate substrate converted into PHA)/(mol of carboxylate substrate in the feed)] was low (e.g., maximally $\~53\%$ for 5 mM 11-POU). Addition of 2-BrOA (up to 5 mM) to the mixed carbon sources raised the conversion yield sensitively and effectively only at low levels of the acid substrates (e.g., 2 mM 1 1-POU or 5 mM OA): For instance, $100\%$ of 2 mM ll-POU were converted into PHA in the presence of 5 mM 2-BrOA, whereas only $\~10\%$ of the 1 1-POU were converted in the absence of 2-BrOA. However, at highly saturated suppressing levels (e.g., 5 mM ll-POU), 2-BrOA inhibitor showed no significant additional effect on the conversion ($60- 70\%$ conversion irrespective of 2-BrOA level). The existence of competitive and compensative relationship between 2­BrOA and all the carboxylic acid substrates used may indicate 'Present address: Section on Brain Physiology and Metabolism, Bldg. 10, Rm. 6N202, National Institute on Agmg, National Institute of Health, Bethesda, MD 20892, U.S.A. that all the acid substrate-derived inhibiting species bind to the same site as the 2-BrOA inhibiting species does. We, therefore, suggest that 2-BrOA can be used for efficiently increasing the yield of conversion of expensive substituted fatty acids into PHA and then substituted 3-hydroxyacids by hydrolyzing it.

Relationships between levels of heterotrophic plate count bacteria and endotoxin in point-of-use water treatment systems

  • Moon, Kyong-Whan;Kim, Young-Whan;Shon, Jong-Ryeul
    • Proceedings of the Korean Environmental Health Society Conference
    • /
    • 2003.06a
    • /
    • pp.132-135
    • /
    • 2003
  • Endotoxin concentrations were measured from 69 point-of-use(POU) water treatment system(WTS) by using Limulus amebocyte lysate(LAL) assay, and the results were compared to heterotrophic bacterial data. Endotoxin concentrations in all POU WTS water samples and tap waters varied within the range 0.8-79.1EU mL$\^$-1/ and 0.1-3.4EU mL$\^$-1/, respectively, The correlations between endotoxin concentration and HPC bacteria from the water samples showed not significant(r=0.18).

  • PDF

Evaluation of the biocidal effects of activated carbon filter supporting silver

  • Moon, Kyong-Whan;Kim, Young-Whan;Choi, Dal-Woong
    • Proceedings of the Korean Environmental Health Society Conference
    • /
    • 2004.06a
    • /
    • pp.202-206
    • /
    • 2004
  • The objectives of this study are to investigate the relationship between the silver ion concentrations released from the point-of-use(POU) water purification devices installed silver impregnated activated carbon filters and the antibacterial activities against HPC bacteria. Total of 68 POU devices were tested. The concentrations of the eluted silver ion from the silver impregnated activated carbon filter showed the range from $4\;{\mu}g/L$ to $386\;{\mu}g/L$, and the HPC bacteria were found to diversely grow within the range 0-5,200 cfu/mL. The average silver concentrations released from UF units system and RO units system were $30\;{\mu}g/L$ and $73\;{\mu}g/L$, respectively. And the number of colonies were reduced significantly as the elution levels of silver exceeded $100\;{\mu}g/L$, however silver ions below the concentration of $100\;{\mu}g/L$ were not particularly effective for eradicating HPC bacteria from water.

  • PDF

A Study on Improvement of Slurry Filter Efficiency in the CMP Process (CMP 공정에서 슬러리 필터의 효율 개선에 관한 연구)

  • Park, Sung-Woo;Seo, Yong-Jin;Seo, Sang-Yong;Lee, Woo-Sun;Kim, Chang-Il;Chang, Eui-Goo
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2001.05b
    • /
    • pp.34-37
    • /
    • 2001
  • As the integrated circuit device shrinks to smaller dimensions, chemical mechanical polishing (CMP) process was required for the global planarization of inter-metal dielectric (IMD) layer with free-defect. However, as the inter-metal dielectrics (IMD) layer gets thinner, micro-scratches are becoming as major defects. Micro-scratches are generated by agglomerated slurry, solidified and attached slurry in pipe line of slurry supply system. To prevent agglomerated slurry particle from inflow, we installed 0.5${\mu}m$ POU (point of use) filter, which is depth-type filter and has 80% filtering efficiency for the $1.0{\mu}m$ size particle. In this paper, we studied the relationship between defect generation and pad count to understand the exact efficiency of the slurry filtration, and to find out the appropriate pad usage. Our preliminary results showed that it is impossible to prevent defect-causing particles perfectly through the depth-type filter. Thus, we suggest that it is necessary to optimize the flow rate of slurry to overcome depth type filters weak-point, and to install the high spray of de-ionized Water (DIW) with high pressure.

  • PDF

Effects of Various Facility Factors on CMP Process Defects (CMP 공정의 설비요소가 공정 결함에 미치는 영향)

  • Park, Seong-U;Jeong, So-Yeong;Park, Chang-Jun;Lee, Gyeong-Jin;Kim, Gi-Uk;Seo, Yong-Jin
    • The Transactions of the Korean Institute of Electrical Engineers C
    • /
    • v.51 no.5
    • /
    • pp.191-195
    • /
    • 2002
  • Chemical mechanical Polishing (CMP) process is widely used for the global planarization of inter-metal dielectric (IMD) layer and inter-layer dielectric (ILD) for deep sub-micron technology. However, as the IMD and ILD layer gets thinner, defects such as micro-scratch lead to severe circuit failure, which affect yield. In this paper, for the improvement of CMP process, deionized water (DIW) pressure, purified $N_2$ ($PN_2$) gas, point of use (POU) slurry filler and high spray bar (HSB) were installed. Our experimental results show that DW pressure and P$N_2$ gas factors were not related with removal rate, but edge hot-spot of patterned wafer had a serious relation. Also, the filter installation in CMP polisher could reduce defects after CMP process, it is shown that slurry filter plays an important role in determining consumable pad lifetime. The filter lifetime is dominated by the defects. However, the slurry filter is impossible to prevent defect-causing particles perfectly. Thus, we suggest that it is necessary to install the high spray bar of de-ionized water (DIW) with high pressure, to overcome the weak-point of slurry filter Finally, we could expect the improvements of throughput, yield and stability in the ULSI fabrication process.

OCT4B Isoform Promotes Anchorage-Independent Growth of Glioblastoma Cells

  • Choi, Sang-Hun;Kim, Jun-Kyum;Jeon, Hee-Young;Eun, Kiyoung;Kim, Hyunggee
    • Molecules and Cells
    • /
    • v.42 no.2
    • /
    • pp.135-142
    • /
    • 2019
  • OCT4, also known as POU5F1 (POU domain class 5 transcription factor 1), is a transcription factor that acts as a master regulator of pluripotency in embryonic stem cells and is one of the reprogramming factors required for generating induced pluripotent stem cells. The human OCT4 encodes three isoforms, OCT4A, OCT4B, and OCT4B1, which are generated by alternative splicing. Currently, the functions and expression patterns of OCT4B remain largely unknown in malignancies, especially in human glioblastomas. Here, we demonstrated the function of OCT4B in human glioblastomas. Among the isoform of OCT4B, OCT4B-190 ($OCT4B^{19kDa}$) was highly expressed in human glioblastoma stem cells and glioblastoma cells and was mainly detected in the cytoplasm rather than the nucleus. Overexpression of $OCT4B^{19kDa}$ promoted colony formation of glioblastoma cells when grown in soft agar culture conditions. Clinical data analysis revealed that patients with gliomas that expressed OCT4B at high levels had a poorer prognosis than patients with gliomas that expressed OCT4B at low levels. Thus, $OCT4B^{19kDa}$ may play a crucial role in regulating cancer cell survival and adaption in a rigid environment.

Power Quality Analysis of Wind Power System interconnected with Distribution Networks (배전계통에 연계된 풍력발전기 운영특성 분석)

  • Kim, Hyun-Han;Kim, Kwang-Ho;Jun, Jung-Pou;Ok, Yeon-Ho;Kwak, Hee-Jin;Jang, Jin-Seung
    • Proceedings of the KIEE Conference
    • /
    • 2011.07a
    • /
    • pp.1338-1339
    • /
    • 2011
  • Recently the wind turbine generating systems are increasing world widely. This type of systems will change the nation's energy environment which largely depends on the fossil fuels. It will also bring new problems to the power industry and the customers. The expected problem is the voltage and frequency stability of the power distribution network, when a wind turbine generating system is connected to the line. It becomes necessary and important to evaluate their impact on the electrical network stability. This paper shows the electrical data measurement and analysis of a inductive wind turbine generator affecting the power quality problem of the distribution line.

  • PDF

A Study of a Generator Efficient Testing Method that Incorporates Tidal Limitations (조력발전소 조위 제약사항을 고려한 발전기 효율시험에 관한 연구)

  • Kim, Hyun-Han;Jun, Jung-Pou;Kim, Kwang-Ho
    • Journal of Industrial Technology
    • /
    • v.33 no.A
    • /
    • pp.23-30
    • /
    • 2013
  • Tidal power generation is to produce electrical energy from fluctuations of the ebb and flow in a constructed embankment. More specifically, the sinusoidal variations of tidal flow, along with the periodicity and changes in the height of waves over time make the tidal power generation possible at a certain tidal level. This paper proposes a more practical efficiency test method for tidal power plant generator that utilizes the axis torque changing values rather than the retardation method which is commonly used. The proposed method was compared with the conventional method and the test result shows that proposed method provides a similar accuracy with the conventional retardation method and a better efficiency.

  • PDF

Fouling control in a woven fibre microfiltration membrane for water treatment

  • Chollom, Martha Noro;Rathilal, Sudesh;Pikwa, Kumnandi;Pillay, Lingham
    • Environmental Engineering Research
    • /
    • v.24 no.3
    • /
    • pp.418-426
    • /
    • 2019
  • Current available commercial membranes are not robust and are therefore destroyed if left to dry out or handled roughly. Woven fibre microfiltration (WFMF) membranes have advantages over its competitors with respect to durability, thus, favourable for the developing economies and operation during rough conditions. Evaluation of the effects of aeration and brushing as a flux enhancement strategies for WFMF membrane was the purpose of this study. The WFMF membrane was found to be susceptible to pore plugging by colloidal material and adsorption/attachment by microbiological contaminants. This led to a 50% loss in flux. Aeration as a single flux enhancement strategy proved insufficient to maintain high flux successfully. Therefore combined flux enhancement strategies yielded the best results.

Protodioscin protects porcine oocytes against H2O2-induced oxidative stress during in vitro maturation

  • So-Hee Kim;Seung-Eun Lee;Jae-Wook Yoon;Hyo-Jin Park;Seung-Hwan Oh;Do-Geon Lee;Da-Bin Pyeon;Eun-Young Kim;Se-Pill Park
    • Animal Bioscience
    • /
    • v.36 no.5
    • /
    • pp.710-719
    • /
    • 2023
  • Objective: The present study investigated whether protodioscin (PD), a steroidal saponin mainly found in rhizome of Dioscorea species, alleviates oxidative stress-induced damage of porcine oocytes during in vitro maturation. Methods: Oocytes were treated with different concentrations of PD (0, 1, 10, 100, and 200 µM) in the presence of 200 µM H2O2 during in vitro maturation. Following maturation, spindle morphology and mitogen-activated protein kinase activity was assessed along with reactive oxygen species level, GSH activity, and mRNA expression of endogenous antioxidant genes at the MII stage. On the day 7 after parthenogenetic activation, blastocyst formation rate was calculated and the quality of embryo and mRNA expression of development-related genes was evaluated. Results: Developmental competence was significantly poorer in the 0 µM PD-treated (control) group than in the non-treated (normal) and 10 µM PD-treated (10PD) groups. Although the reactive oxygen species level did not significantly differ between these three groups, the glutathione level and mRNA expression of antioxidant genes (superoxide dismutase 1 [SOD1], SOD2, nuclear factor erythroid 2-related factor 2 [Nrf2], and hemo oxygenase-1 [HO-1]) were significantly higher in the normal and 10PD groups than in the control group. In addition, the percentage of oocytes with defective spindle and abnormal chromosomal alignment was significantly lower and the ratio of phosphorylated p44/42 to total p44/42 was significantly higher in the normal and 10PD groups than in the control group. The total cell number per blastocyst was significantly higher in the 10PD group than in the control group. The percentage of apoptotic cells in blastocysts was highest in the control group; however, the difference was not significant. mRNA expression of development-related genes (POU domain, class 5, transcription factor 1 [POU5F1], caudal type homeobox 2 [CDX2], Nanog homeobox [NANOG]) was consistently increased by addition of PD. Conclusion: The PD effectively improves the developmental competence and quality of blastocysts by protecting porcine oocytes against oxidative stress.