• Corrosion Science and Technology
• /
• v.22 no.6
• /
• pp.435-446
• /
• 2023

Corrosion behaviors of laser-welded super duplex stainless steel (SDSS) tubes after exposure to an actual power plant environment for one year and those of fin-tube welded SDSS were evaluated. Results showed that corrosion damage on the back side of the SDSS tube in the direction of hot air was higher than that on the front side regardless of weldment location. However, corrosion damage showed no difference between weldment and base metal due to recovery of phase fraction in the weldment through post weld heat treatment (PWHT). Nevertheless, the SDSS tube showed severe corrosion damage along grain boundary due to surface phase transformation (δ → γ) and Cr₂N precipitation caused by PWHT with a high N₂ atmosphere. Corrosion resistance of the SDSS tube was recovered when degraded surface was removed. Corrosion sensitivity of a fin-tube increased significantly due to pre-existing crevice, unbalanced phase fraction, and σ phase precipitation adjacent to the fusion line. Although corrosion resistance was improved by recovered phase fraction and sufficient dissolution of σ phase during PWHT, corrosion reaction was concentrated at the pre-existing crevice. These results suggest that welding conditions for fin-tube steel should be optimized to improve corrosion resistance by removing pre-existing crevice in the weldment.

• Information Systems Review
• /
• v.22 no.4
• /
• pp.59-74
• /
• 2020

This paper investigates the asymmetric effect of social sentimental on an individual stock price return. For this purpose, four companies such as POSCO, Korean Electricity, AMORE PACIFIC, KIA Motors are chosen from KOSPI listed companies in terms of dataperspective. The main estimation results are as follows: the positive opinions affect only the stock prices return of three companies while the negative opinions affect all of the companies. It shows that positive or negative texts give asymmetric effect on stock price return and the effect of negative opinions is bigger than that of positive opinions. The results imply that investors are more sensitive to the negatives since they have the tendency of loss aversion. Also, it indicates that subjective opinion on SNS can be used as the proxy for the investment sentiment.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.17-24
• /
• 2024

The characteristics of low-heat concrete, mixed with ground blast furnace slag and ferronickel slag aggregate, were analyzed. Moreover, the applicability of this concrete for mass concrete in LNG storage tanks was examined. Initially, the study investigated the characteristics of fresh and hardened concrete. Subsequently, the temperature rising curve was obtained. Utilizing the obtained parameters from the curves, a series of thermal stress analyses for the LNG storage tank were conducted to assess the risk of cracking. The results confirmed that concrete mixtures incorporating ground blast furnace slag and ferronickel slag aggregate not only exhibited sufficient workability but also achieved a compressive strength of approximately 40 MPa within 28 days. Furthermore, the concrete demonstrated a lower terminal heat rise and a faster heat generation rate compared to low-heat Portland cement concrete. An analysis of thermal stress in various sections of the LNG tank validated a low risk of cracking.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.40-46
• /
• 2024

A novel approach is presented to address issues associated with the use of strong acidic solutions for the leaching of magnesium oxide (MgO) from spent magnesia-carbon refractories. An ultrasonic flotation and separation process is employed, with a mildly acidic solvent, acetic acid, used to selectively chelate MgO from the spent refractories. When using 2 M acetic acid as a solvent, the recovery of the graphite exhibited 99.7 % with high purity of 72.7 %, showing a significant improvement compared to using water as the solvent. Furthermore, the technology presented in this study offers a method for producing magnesium acetate through the reaction of MgO in spent refractory with acetic acid, providing a means for the purification and separation of graphite.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.491-497
• /
• 2011

In this work, we proposed the three different reactor systems for evaluating of synthetic natural gas(SNG) processes using the synthesis gas consisting of CO and $H_2$ and reactor systems to be considered are series adiabatic reaction system, series adiabatic reaction system with the recirculation and cooling wall type reaction system. The maximum temperature of the first adiabatic reactor in series adiabatic reaction system raised to 800. From the these results, carbon dioxide in product gas as compared to other systems was increased more than that expected due to water gas shift reaction(WGSR) and the maximum $CH_4$ concentration in SNG was 90.1%. In series adiabatic reaction system with the recirculation as a way to decrease the temperature in catalyst bed, the maximum $CH_4$ concentration in SNG was 96.3%. In cooling wall type reaction system, the reaction heat is absorbed by boiling water in the shell and the reaction temperature is controlled by controlling the amount of flow rate and pressure of feed water. The maximum $CH_4$ concentration in SNG for cooling wall type reaction system was 97.9%. The main advantage of the cooling wall type reaction system over adiabatic systems is that potentially it can be achieve almost complete methanation in one reactor.

• Journal of the Korea Concrete Institute
• /
• v.21 no.3
• /
• pp.283-290
• /
• 2009

Differently from fly ash, the bottom ash produced from thermoelectric power plant has been treated as an industrial waste matter, and almost reclaimed a tract from the sea. If this waste material is applicable to foam concrete as an aggregate owing to its light-weight, however, it may be worthy of environmental preservation by recycling of waste material as well as reducing self-weight of high-rising structure and horizontal forces and deformations of retaining wall subject to soil pressure. This study has an objective of evaluating the effects of application of bottom ash on the mechanical properties of foam concrete. Thus, the ratio of bottom ash to cement was selected as a variable for experiment and the effect was measured in terms of unit weight of concrete, air content, water-cement ratio and compressive strength. It can be observed from experiments that the application ratios have different effects on the material parameters considered in this experiment, thus major relationships between application ratio and each material parameter were finally introduced. The result of this study can be applied to decide a mix design proportion of foam concrete while bottom ash is used as an aggregate of the concrete.

• Journal of the Korea Concrete Institute
• /
• v.24 no.4
• /
• pp.453-463
• /
• 2012

Steel-concrete composite rigid-frame bridge is a type of integral bridge having advantages in bridge maintenance and structural efficiency from eliminating expansion joints and bridge supports, the main problems in bridge maintenance. The typical steel-concrete composite rigid-frame bridge has the girder-abutment connection where a part of its steel girder is embedded in abutment for integrity. However, the detail of typical girder-abutment connection is complex and increases the construction cost, especially when a part of steel girder is embedded. Recently, a new type of bridge was proposed to compensate for the disadvantages of complex details and cost increase. The compensation are expected to improve efficiency of construction by simplifying the construction detail of the girder-abutment connection. In this study, a static load test has been carried out to examine the behavior of the girder-abutment connection using real-scale specimens. The results of the test showed that the girder-abutment connection of proposed girder bridge has sufficient flexural capacity and rebars to control concrete crack should be placed on the top of abutment.

• Journal of Distribution Science
• /
• v.12 no.4
• /
• pp.65-72
• /
• 2014

Purpose - Because of the emphasis on the necessity of academic-industrial cooperation between companies and universities, there are various ongoing academic-industrial cooperation programs led by the government. As government actively supports such cooperation as policy,and universities vitalize new technology development, academic-industrial cooperation between companies and universities is being recognized as an important growth engine for companies the competitiveness of academic-industrial cooperation is also attracting more interest. The government has vitalized human resource fostering, practical R&D, and technology transfer to companies since 2012 by executing a "leading university fostering project for academic-industrial cooperation." Based on an organic interlink among universities, industry, and research institutes, the government also created and is promoting several models of such cooperation between companies and universities to support shared growth of industry and local universities. The purpose of academic-industrial cooperation is growth and benefit fromtechnology development, technical cooperation, and technology transfer between companies and universities. Research design, data, and methodology - As more academic-industrial cooperation efforts are ledby companies due to the limitation in technology-focused commercialization cooperation, the academic-industrial cooperation system became fragmented and it is losing the potential for future advancement. Specifically, as differences between universities grow, academic-industrial cooperation between companies and universities based on new technology from universities is finding difficulty advancing,while systematic support from companies to enhance the performance of businesses created by academic-industrial cooperation is also insufficient. Accordingly, this study established a growth model for the advancement of academic-industrial cooperation between companies and universities and suggested a plan to strengthen the competitiveness and promote the future advancementof academic-industrial cooperation between companies and universities by analyzing the current situation of such cooperation and diagnosing its issues. Results - This study explored the concept and current status of academic-industrial cooperation relationships and analyzed related issues. For such cooperative organizations to be competitive, the employment environment of professional human resources for academic-industrial cooperation should be improved and measures to secure professional resources should be taken as early as possible. Though the academic-industrial cooperation now is being led by government, there is a limitation based on business models, which require creation of profit; however, an academic-industrial cooperation model still cannot stand alone without the support of government. This study also pointed out that a having only a plan to build competitiveness of companies and universities for academic-industrial cooperation is not sufficient. Conclusions - In order to increase the competitiveness of academic-industrial cooperation, a detailed growth-sharing model for academic-industrial cooperation should be developed, and there should be more joint development processes for the advancement of such cooperation in which the need for technology development can be verified in advance. In addition, beyond focusing on technology-focused academic-industrial cooperation, a network between companies and universities searching for ideas for academic-industrial cooperation in the fields of human and social aspects should be created. A new academic-industrial model linking current cooperation between companies and universities to the local area should be built based on such academic-industrial cooperation in human and social fields.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.260-265
• /
• 1999

$SiC/Si_3N_4$ composites were prepared by mixing ${\alpha}-Si_3N_4$ powder to $\alpha$-SiC powder in the range of 10 to 30 vol% with 10 vol% interval. 6 wt% of $Al_2O_3$ and $Y_2O_3$ were also added respectively as sintering aids. Then, pressureless sintering was performed at 1,78$0^{\circ}C$ for 2 hours in $N_2$ gas. In the case of adding 20 vol% of ${\alpha}-Si_3N_4$ powder, the relative desity to theoretical value and the flexutal strength were 92 % and 3,560 MPa, respectively. The smallest relative worn amount thereof was $2.68{\times}10^{-3}\;mm^2$ for 20 vol% ${\alpha}-Si_3N_4$. The composite containing 30 vol % of ${\alpha}-Si_3N_4$ powder showed the highest fracture toughness $(K_{1c})$ of $4.9\;MN/m^{3/2}$, although the reduction of the wear resistance due to the effect of the pores was observed.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.5
• /
• pp.949-957
• /
• 2000

This study investigates the remediation of the phenol or PNP(p-Nitrophenol) contaminated soils in a slurry reactor by a pure culture, P-99. The application of a pure culture for the phenol decontamination make the degradation rate three times faster than that of the mixed activated sludge. The destruction of 300 mg/L phenol was completed in 26 hours. As 1 mg of phenol was added, 0.1457 mg of microorganism was grown in the medium. The pure culture could not utilizes PNP, one of the xenobiotics, as a growth substrate. When the bacteria was induced by phenol enrichment medium. PNP could be effectively transformed with cometabolic process. The induction of the bacteria requires 1 mg of phenol for the destruction of 0.027 mg PNP. When PNP concentration in the medium contained phenol and PNP increased. the degradation rate of phenol was decreased. The degradation rate of phenol and PNP in the slurry reactor was about two times faster than in the reactor without slurry because of higher dissolved oxygen supply in the aqueous phase and adsorption on the surface of the soil.