• 한국환경농학회지
• /
• 제25권4호
• /
• pp.289-296
• /
• 2006

Various drying conditions, temperatures (40 to $80^{\circ}C$) and durations (overnight to 72 hrs), for the particulate organic matter (POM) fraction after wet-sieving size fractionation have been applied for determination of POM contents in the weight loss-on-ignition method. In this study, we investigated the optimum drying condition for POM fraction in quantification of POM and/or mineral-associated organic matter (MOM; usually indirectly estimated). The influence of the drying conditions on quantifying POM was dependent upon soil properties, especially the amount of soil organic components. In relatively high organic soils (total carbon > 40 g/kg in this study), the POM values were significantly higher (overestimated) with drying at $55^{\circ}C$ than those values at $105^{\circ}C$, which were, for example, 173.2 and 137.3 mg/kg, respectively, in a soil studied. However, drying at $55^{\circ}C$ for longer than 48 hrs of periods produced consistent POM values even though the values were much higher than those at $105^{\circ}C$. Thus, indirect estimates of MOM (MOM = SOM-POM) also tended to be significantly impacted by the dry conditions. Therefore, we suggest POM fractions should be dried at $105^{\circ}C$ for 24 hrs as determining POM and MOM contents. If the POM traction is needed to be dried at a lower temperature (e.g. $55^{\circ}C$) with a specific reason, at least 48 hrs of drying period is necessary to obtain consistent POM values, and a moisture correction factor should be determined to adjust the values back to a $105^{\circ}C$ weight basis.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권1호
• /
• pp.26-30
• /
• 2004

Orientation control of a polyoxometalate (POM) nanoparticle in its two-dimensional arrangement was attempted by Langmuir-Blodgett (LB) technique. For their uniorientation, two carboxyl groups were introduced on one side of the POM particle, and hydrophobic long chains were attached by esterification with the carboxyl groups (C18-POM). The C18-POM layer spread on water surface showed stability against surface pressure up to 60 mN/m. The pattern of the C18-POM isotherm was quite different from stearyl alcohol (C18-OH), while the POM itself did not show any development of surface pressure on water surface. The AFM images of C18-POM LB films showed some microcrystalline structures that were noticed as dot structures by Brewster angle microscopy. The microimages for C18-POM did not completely spread out as a monolayer on the water surface. The XPS spectra indicated the presence of POM structures and stearyl ester bonds formed from about 65% of the total carboxyls. The XRD spectra showed that the unioriented POMs were not positioned with the same lattice distance but rather in a wavy surface state.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.153-153
• /
• 2016

Polyoxymethylene copolymer (POM-C) is an attractive and widely used engineering thermoplastic across many industrial sectors owing to outstanding physical, mechanical, self-lubricating and chemical properties. In this research work, the POM-C blocks were irradiated with 1 MeV electron beam energy in five doses (100, 200, 300, 500 and 700 KGy) in vacuum condition at room temperature. The tribological and physico-chemical properties of electron beam irradiated POM-C blocks have been analyzed using Pin on disk tribometer, Raman spectroscopy, SEM-EDS, Optical microscopy, 3D Nano surface profiler system and Contact angle analyzer. Electron beam irradiation at a dose of 100 kGy resulted in a decrease of the friction coefficient and wear loss of POM-C block due to well suited cross-linking, carbonization, free radicals formation and energetic electrons-atoms collisions (physical interaction). It also shows lowest surface roughness and highest water contact angle among all unirradiated and irradiated POM-C blocks. The irradiation doses at 200, 300, 500 and 700 kGy resulted in increase of the friction coefficient as compared to unirradiated POM-C block due to severe chain scission, chemical and physical structural degradation. The electron beam irradiation transferred the wear of unirradiated POM-C block from the abrasive wear, adhesive wear and scraping to mild scraping for the 1 MeV, 100 kGy irradiated POM-C block which is concluded from SEM-EDS and Optical microscopic observations. The degree of improvement for tribological attribute relies on the electron beam irradiation condition (energy and dose rate).

• 한국해양학회지
• /
• 제29권2호
• /
• pp.107-118
• /
• 1994

반폐쇄성 내만인 진해만의 입자유기물 (POM)함량과 C:N:P비의 변화를 1993년 1월 부터 12월 까지 1년간 조사하였다. 입자유기탄소와 질소 및 입자 인의 농도는 각각 198∼4,416 ugC/l과 24∼792 ugN/l 및 4.50∼69.00 ugP/l범위였고 특히 입자유기탄소 와 질소농도는 여름철에 가장 놓고 그 외 계절에는 유사한 농도분포를 보이면 uni-modal한 계절변동이 나타났다. 입자물질의 C:N:P 원자비 역시 여름철에 가장 높았 다. C:N 원소비는 년중 6.53 Redfield ratio와 거의 일치하며 겨울철(1, 2월)을 제외 한 조사기간중 표층수중의 POM 농도와 chlorophyll-a 사이에 높은 상관관계가 나타난 다. 이와 같은 결과들은 조사해역의 입자유기물농도가 식물플랑크톤 생물량에 의해 조 절된다는 것을 보여주고 특히 많은 육수유입과 함께 강한 성층이 형성되는 여름철의 높은 POM농도는 육상으로부터 다량의 영양염 공급에 의한 식물플랑크톤의 대증식에 기 인하는 것으로 보인다. 한편 여름철의 높은 POC:PP 와 PON:PP ratio는 인산염에 비하 여 과다한 질소계 영양염을 함유한 육수유입의 영향으로 인산염이 제한요인으로 작용 한다는 것을 시사한다.

• 생태와환경
• /
• 제40권1호
• /
• pp.93-102
• /
• 2007

남한강과 북한강 상류지역에 위치한 11개 하천을 대상으로 강우 시 발생하는 탁수의 생지화학적 특성을 조사하였다. 강우 시 하천에서 POM와 DOM의 유출특성은 유량변동에 따라 다르게 나타났으며, 특히 POM의 유출은 하천의 유역특성과 밀접한 관련이 있는 것으로 나타났다. 강우의 영향에 따라 DOM내 용존 부식물질(Humic substance)의 비율을 반영하는 SUVA값이 증가하였고, 이는 하천유역으로부터 난분해성유기물의 유입이 증가함을 의미한다. 강우 시 발생된 탁수의 생지화학적 특성을 분석한 결과 농경지역에서 유출되는 탁수가 삼림지역으로부터 유출되는 탁수보다 안정탄소동위원소비가 약 $1{\sim}2%_{\circ}$정도 높게 나타났다. 이는 상대적으로 안정탄소동위원소비가 높은 $C_4$계열의 작물이 농경지역에서 우세한 경우 또는 삼림지역으로부터 유출된 탁수에서 주로 $C_3$계열의 식물체의 리그닌(Lignin)의 함량이 높기 때문이다. 유기물의 기원에 따라 Isotopic mass balance를 적용한 결과 농경지나 경작지의 비율이 높아질수록 $C_4$계열 작물의 기여도가 높아지고 이에 따라 탄소동위원소비가 증가하는 경향을 보였다. 본 연구결과를 바탕으로 안정탄소동위원소를 이용한 탁수 연구는 유기물의 기원특성을 연구하는데 유용한 지표가 될 수 있다.

• Journal of Ecology and Environment
• /
• 제36권3호
• /
• pp.183-191
• /
• 2013

Dissolved organic carbon (DOC) concentrations and zooplankton and particulate organic matter (POM) ${\delta}^{13}C$ values were measured in five reservoirs in Korea. Zooplankton ${\delta}^{13}C$ and POM ${\delta}^{13}C$ showed large range from -33‰ to -22‰ and a significant difference among the reservoirs. One eutrophic reservoir, Lake Masan, showed unique characteristics with the highest zooplankton density, the highest ${\delta}^{13}C$, and the highest DOC. Zooplankton ${\delta}^{13}C$ was similar to POM ${\delta}^{13}C$, implying that zooplankton occupies substantial portion of POM or that zooplankton isotopic composition is related to selective grazing and assimilation of food sources from bulk POM. Except Lake Masan zooplankton ${\delta}^{13}C$ values were negatively correlated to DOC concentration in four reservoirs with mostly forest land use. This pattern can be probably attributed to intensive agricultural land use in the watershed of Lake Masan compared to the mostly forest land use in the other watersheds. Understanding the relationship between zooplankton ${\delta}^{13}C$ values and the origin of organic matter associated with watershed characteristics will be valuable to better understand trophic relationships in reservoirs in the summer monsoon region.

• Journal of Ecology and Environment
• /
• 제43권1호
• /
• pp.14-21
• /
• 2019

Background: Stoichiometry plays an important role in understanding nutrient composition and cycling processes in aquatic ecosystems. Previous studies have considered C:N:P ratios constant for both DOM (dissolved organic matter) and POM (particulate organic matter). In this study, water samples were collected in the six major rivers in Korea and were incubated for 20 days. C:N:P ratios were determined during the time course of the incubations. This allowed us to examine the changes in N and P contents of organic matter during decomposition. Results: POM and DOM showed significant differences in N and P content and the elemental ratios changed during the course of decomposition; DOM showed higher C:N and C:P ratios than POM, and the C:N and C:P ratios increased during decomposition, indicating the preferential mineralization of P over N and N over C. Conclusions: The N and P contents of organic matter in aquatic ecosystem are far from constant and vary significantly during decomposition. More detailed information on the changes in C:N:P ratios will provide improved understanding of decomposition processes and improved modeling of aquatic ecosystems.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1295-1296
• /
• 2010

• Membrane and Water Treatment
• /
• 제12권1호
• /
• pp.23-35
• /
• 2021

A POM-membrane was fabricated by immobilizing a keggin type polyoxometalate (POM) H5PV2Mo10O40 onto the surface of microporous flat-sheet polymeric polyvinylidene fluoride (PVFD) membrane using a chemical deposition method. The POM-membrane was characterized by FT-IR, SEM and EDX to confirm existing of the POM onto the membrane surface. The POM-membrane was used to remove an anionic textile dye (Reactive Black 5 named as an RB5) from aqueous phases with a cross-flow membrane filtration and a batch adsorption system. The dye removal efficiency of the POM-membrane using the cross-flow membrane filtration system and the batch adsorption system was about 88% and 98%, respectively. The influence factors such as contact time, adsorbent dosage, pH, and initial dye concentration were investigated to understand the adsorption mechanism of the RB5 dye onto the POM-membrane. To find the best fitting isotherm model, Langmuir, Freundlich, BET and Harkins-Jura isotherm models were used to analyze the experimental data. The isotherm analysis showed that the Langmuir isotherm model was found to the best fit for the adsorption data (R2 = 0.9982, qmax = 24.87 mg/g). Also, adsorption kinetic models showed the pseudo second order kinetic model was found the best model to fit the experimental data (R2 = 0.9989, q = 8.29 mg/g, C0 = 15 ppm). Moreover, after four times regeneration with HNO3 acid, the POM-membrane showed high regenerability without losing dye adsorption capacity.

• 생태와환경
• /
• 제41권spc호
• /
• pp.27-34
• /
• 2008

본 연구는 부영양상태의 신구저수지에서 강우기 전 후의 수질 변화와 강우기 유입수의 영향을 평가하기 위해 이루어졌다. 강우기 전에는 수심에 따른 수온차가 $1^{\circ}C$이하였지만 강우기 후에는 $4^{\circ}C$차 이상까지 벌어져 수온 약층이 뚜렷하게 형성되었다. 탁도는 강우기 전보다 강우기 후에 표층에서 12NTU, 저층 120NTU로 크게 증가하였다. POC의 농도는 강우기 전의 조사에서 수심에 따라서 $4.96{\sim}6.68mg\;L^{-1}$의 범위를 나타내고 강우기 후의 조사에서는 $1.73{\sim}5.32mg\;L^{-1}$의 범위를 나타내고 있어 전체적으로 강우기 전보다 강우기 후의 POC의 농도가 낮았으나 수심에 따라서 크게 증가하는 경향을 보이고 있다. 또한, DOC의 농도는 강우기 전의 조사에서 $3.82{\sim}3.96mg\;L^{-1}$의 범위를 나타내고 있고, 강우기 후의 조사에서 $2.18{\sim}2.57mg\;L^{-1}$의 범위를 나타내고 있어 전체적으로 강우기 전보다 강우기 후의 DOC농도는 감소하고 있다. 또한 강우기 후 저층의 높은 탁도층에서 강우기 전보다 입자성유기물의 C/N비가 크게 증가하였고 입자성 유기물의 ${\delta}^{13}C$와 ${\delta}^{15}C$값이 뚜렷하게 가벼운 값을 보이는 것으로 볼 때 저수지 주변 유역에서 유입된 유기물의 영향을 크게 받았다는 것을 알 수 있다. 본 연구 결과로 볼 때 농업용 저수지인 신구저수지는 하계 강우기시 유입하천을 통해 외부로부터 유입된 육상식물 유기물이 저층에 부유된 상태로 존재하며 이는 저수지 내 저층 수생태계의 에너지 흐름에 영향을 줄 수 있는 것으로 사료된다.