• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1857-1860
• /
• 2003

The ablative decomposition mechanism of PMMA(polymethyt methacrylate), PET(polyethylene terephthalate) and PC(polycarbonate) with KrF excimer laser(λ: 248nm, pulse duration: 5ns) is investigated. The UV/Vis spectrometer analysis showed that PMMA is a weak absorber and PET, PC are a strong absorber at the wavelength of 248nm. The results(surface debris, melt, etch depth, etching shape) from drilling and direct writing experiments imply that ablation mechanism of PMMA is dominated by photothermal process, while that of PET, PC are dominated by photochemical process.

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1616-1622
• /
• 2001

Fiber composite materials are widely used in aerospace industries due to their high specific strength and stiffness. Especially, the increasing use of polymer composite materials for injection of automobile components has led to a considerable interest in the application of stress pattern analysis by thermal emission to these composite materials. Therefore, in this study the microstructure of glass fiber orientation at the parent and weld line of polycarbonate is observed by a light transmission. And we also investigate a stress concentration model of a notch including short glass fibers. Especially the polymer injection weld reorients the fiber to suggest a new method for the evaluation of inhomogeneous deformation.

• Journal of Power System Engineering
• /
• v.3 no.2
• /
• pp.13-19
• /
• 1999

The purpose of the present experimental study is to apply multi-point simultaneous measurement by PIV(Particle Image Velocimetry) to high-speed flow region within a domestic boiler circulation pump. Two different kinds of flow rate($27{\ell}/min,\;19{\ell}/min$)are selected as experimental condition. A volute casing and Impeller made of transparent Polycarbonate were made for the easy access of the illumination laser via fiber optical line and cylinder lens assembly to the measuring region. A CCD camera is syncronized with AOM to acquire clear original particle images. Optimized cross correlation identification to obtain velocity vectors is implemented by direct calculation of correlation coefficients. The instantaneous and time-mean velocity distribution, velocity profile and kinetic energy are represented quantitatively at the full-scale region for the deeper understanding of the unsteady flow characteristics in a commercial circulation pump.

• YAKHAK HOEJI
• /
• v.44 no.3
• /
• pp.251-256
• /
• 2000

Sterically stabilized liposomes (SSL) composed of distearoylphosphatidylcholine, cholesterol, dicetylphosphate and distearoylphosphatiodylethanolamine-N-poly(ethyleneglycol) 2000 (DSPE-PEG 2000) were made by reverse phase evaporation method to prolong biological half-life and decrease toxic side effect of drug. Streptozocin (572), a water-soluble antitumor agent with short half-life, was selected as a model drug. The size of SSL was controlled by polycarbonate extrusion to 100 nm which is adequate size for long circulation in plasma. The release rate of drugs from SSL in PBS was evaluated. And the stability of STZ-containing liposomes against drug leakage into rat plasma was evaluated in order to investigate the interaction of liposome and plasma protein. Incorporation of DSPE-PEG 2000 into conventional liposomes significantly decreased the drug leakage into rat plasma.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.175-176
• /
• 2009

Energy saving and environment-friendly dyeing method of cotton with reactive dyes is the ultra low liquor ratio dyeing because it reduces the total quantity of water, dye, salt and alkali during the dyeing process in the effluent as well as the energy consumption. However, this method may not guarantee the quality of the dyeing results due to the specs or unlevel dyeing depending upon the dyes used. The study has focused on the effect of leveling agents in the dyeing of cotton with reactive dyes under the ultra low liquor ratio (1:5). Especially Sunfix N/B MF-D which was selected for ULLR showed low-leveled dyeing comparing with the other MF-D series. A leveling agent having polycarbonate structure increased LDF values of Sunfix N/B MF-D without changing of dyeing fastness. We recommend some leveling agents to improve the leveling behavior for ULLR dyeing.

• Journal of the Korea Furniture Society
• /
• v.10 no.2
• /
• pp.17-27
• /
• 1999

As a countermeasure to reach self-sufficiency for wood supply and demand, we have to develop wood substitutes. Rice hull is the cheapest fiber material we can get in Korea, What is better the yield of rice hull amounts to 1 million tons per year. Before carrying out this study, new ecomaterial rice hull board for housing materials was developed successfully. In order to evaluate whether the rice hull board with or without bioceramic treatment is suitable for housing materials, we studied the environmental effect of the above materials in comparison with the polycarbonate, stainless, or concrete on the adaptation (body weight, water/feed consumption, general signs, urinalysis, autopsy, etc) and the reproduction(litter size, newborn adaptation, etc)of mice. In conclusion, the concrete cage was the worst in the adaptation and so was the stainless steel cage in the reproduction. The rice hull board cage with or without bioceramic treatment was superior or equivalent to other material cages from the standpoints of the adaptation and reproduction.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.218-224
• /
• 1999

It is necessary to improve mechanical and optical properties in the optical disk substrates as the information storage devices with high storage density using short wavelength laser are being developed. Injection compression molding is regarded as the most suitable process to manufacture optical disk substrates with high is regarded as the most suitable process to manufacture optical disk substrates with high dimensional accuracy low residual stresses and superb optical properties In the present study polycarbonate optical disk substrates were fabricated by injection compression molding and the birefringence regarded as one of the most important optical properties for optical disk is measured. The effects of various processing conditions upon the development of birefringence distribution were examined experimentally. It was found that the value of the birefringence distribution were very sensitive to the mold wall temperature history and the variance of the birefringence distribution in the radial direction was affected by the level of the packing and the compression pressure.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.167-170
• /
• 2000

Recently the sub-micron structured substrates of 0.74 ${mu}ell$ track pitch and 800 $\AA$groove depth are required for DVD-RAM and the track pitch is expected to be narrower as the need for the information storage density is getting higher. For the accurate replication of the land-groove structure in the stamper to the plastic substrates it is important to control the injection -compression molding process such that the integrity of the replication for the land-groove structure is maximized. in the present study polycarbonate substrates were fabricated by injection comression molding and the land-groove structure regarded as one of mold temperature and the compression pressure on the integrity of the replication were examined experimentally. An efficient design methodology using the response surface method (RSM) the central composite design(CCD) technique and the analysis-of-variance (ANOVA) was developed to obtain the optimum processing conditions which maximize the integrity of the replication with a limited number of experiments.

• Transactions of Materials Processing
• /
• v.18 no.8
• /
• pp.616-624
• /
• 2009

In this work we demonstrate the hot-embossing process under different forming conditions such as forming temperature, load, and holding time in pressing, in order to determine the suitable conditions required for linear patterning on polymer plates (PC). Results showed that the replicated pattern depth increased in proportion to an increase in the forming temperature, load, and time. The reduction of the workpiece thickness increased according to the holding time in the pressing process. In the process of time, the reduction ratio of the workpiece thickness decreased due to the surface area increment of the workpiece, while the pressure on the workpiece declined. In order to reduce the bulging ratio we introduced a temperature difference between the upper and the lower punch.

• Journal of the Korean Ceramic Society
• /
• v.38 no.2
• /
• pp.152-157
• /
• 2001

본 연구에서는 고유동, 저발열 및 고강도 특성을 발현하는 belite-rich cement(BRC)에 있어서 카르복실산계 유기혼화제를 사용했을 때 가용성 알칼리의 함량 변화에 따른 흡착거동과 유동특성에 미치는 영향성에 대해 검토하였다. BRC에서 알칼리 0.1~0.2 wt% 및 알칼리 설페이트 0.3~0.5 wt% 첨가시 슬럼프가 증가하거나 손실이 거의 없었으며, 그 이상의 함량을 첨가하였을 때 다시 유동서 저하를 가져왔다. 그러나, 보통 포틀랜드 시멘트(OPC)의 슬럼프 유지능력은 알칼리 및 알칼리 설페이트를 첨가할수록 감소되었다.