• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1140-1142
• /
• 2002

This paper is proposed to position and speed control of interior permanent magnet synchronous motor(IPMSM) drive without mechanical sensor. The rotor position, which is an essential component of any vector control schemes, is calculated through the instantaneous stator flux position and an estimated flux value of rotating reference frame. A closed-loop state observer is implemented to compute the speed feedback signal. The validity of the proposed sensorless scheme is confirmed by simulation and its dynamic performance is examined in detail.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.60-63
• /
• 1997

A new approach to the position sensor elimination of PM synchronous motor drives is presented in this study. Using the position sensing characteristics of PMSM itself, the actual rotor position as well as the machine speed can be estimated by adaptive flux observer and used as the feedback signal for the vector controlled PMSM drive. The adaptive speed estimation is achieved by model reference adaptive technique. The adaptive laws are derived by the Popov's hyperstability theory and the positivity concept. In order to verify the effectiveness of the proposed scheme, computer simulations are carried out for the actual parameters of a PM synchronous motor and the results well demonstrate that the proposed scheme provides a good estimation value of the rotor speed without mechanical sensor. It is also shown that the actual rotor position as well as the machine speed can be achieved under the variation of the magnet flux linkage. Since the flux linkages are estimated by the adaptive flux observer and used for the identification of the rotor speed, robust estimation of the rotor speed can be performed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.741-745
• /
• 2001

Reliability and safety of steer-by-wire concepts can be achieved by redundant designs. This paper discusses the design of a fault tolerant concept for a force feedback actuator with a standard three-phase PMSM. In contrast to usual drives, the phases of the machine are separated electrically. This design allows driving the machine with two instead of three phases in case of a fault. A superimposed torque controller adjusts the influence of fault currents and torque harmonics in two-phase operation and guarantees smooth torque at the steering wheel

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.415-419
• /
• 2003

This paper focuses on a simple technique to reduced torque ripple in the direct torque control inverter for PMSM drive. It is actually impossible to raise the inverter switching frequency in the conventional system, although the hysterisis bandwidths for the stator flux and torque control are sufficiently diminished, because of the sampling Interval and the delay in estimating the flux and the torque In order to overcome the problem, the proposed method introduces a dithering technique into the conventional system by superposing triangular waves with high frequency and minute amplitude on the torque error. And the programable 3- stage lowpass filter is added instead of pure Integrator. Simulation results prove the feasibility of proposed strategy compared with conventional method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.910-911
• /
• 2011

미래사회의 기술적 혁신을 이끌 것으로 생각되는 로봇산업에 대한 관심이 증대되고 있으며, 최근에 많은 기술 개발과 개선이 이루어지고 있다. 이러한 경향은 점차 확대될 것으로 예상되며 전기자동차와 유사한 신성장 동력으로 성장할 것이다. 그러나, 로봇의 핵심 부품인 모터와 같은 구동계는 타분야에 비하여 기술적 혁신 및 관심을 끌지 못하고 있다. 앞으로 로봇산업이 확대 성장하여 산업용 로봇에서 가정용 로봇으로 진화하고, 로봇의 기능적인 측면이 보행, 러닝, 점프 등의 고성능을 구현하기 위해서는 각종 관절을 구동하는 역할을 담당하는 모터 및 동력전달 알고리즘의 연구 개발이 더욱 활발히 이루어져야 할 것이다. 특히, 인간과 유사한 로봇을 구현하기 우하여 보다 Flat하고 가볍고 출력밀도가 높은 새로운 구동장치의 필요성이 증대될 것이다. 본 논문에서는 산업노동지원을 위한 착용식 근력증강 로봇에 적용하는 모터 개발을 목적으로 적합한 구동계 타입을 선정하고, 요구 성능을 만족하는 전동기를 전자계 해석을 통하여 설계하고, 시작품 제작 및 평가를 통하여 해석결과를 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.615-619
• /
• 2000

This paper presents an implementation of digital motion control system of Surface Permanent-Magnet Synchronous Motor(SPMSM) vector drives with a direct torque control(DTC) using the 16bit DSP TMS320F240 The DSP controller enable enhanced real time algorithm and cost-effective design of intelligent control for motors which can be yield enhanced operation fewer system components lower system cost increased efficiency and high performance The system presented are stator flux and torque observer of stator flux feedback model that inputs are current and voltage sensing of motor terminal and angle for a low speed operating area two hysteresis band controllers an optimal switching look-up table and IGBT voltage source inverter by using fully integrated control software. The developed control system are shown a good motion control response characteristic results and high performance features using 1.0Kw purposed servo drive SPMSM.

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.604-614
• /
• 2012

This paper presents a comparative study of position sensorless control schemes based on back-electromotive force (back-EMF) estimation in permanent magnet synchronous motors (PMSM). The characteristics of the estimated back-EMF signals are analyzed using various mathematical models of a PMSM. The transfer functions of the estimators, based on the extended EMF model in the rotor reference frame, are derived to show their similarity. They are then used for the analysis of the effects of both the motor parameter variations and the voltage errors due to inverter nonlinearity on the accuracy of the back-EMF estimation. The differences between a phase-locked-loop (PLL) type estimator and a Luenberger observer type estimator, generally used for extracting rotor speed and position information from estimated back-EMF signals, are also examined. An experimental study with a 250-W interior-permanent-magnet machine has been performed to validate the analyses.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 영호남 학술대회 논문집
• /
• pp.55-58
• /
• 2003

IPMSM (Interior Permanent Magnet Synchronous Motor) is widely used in many applications such as an electric vehicle, compressor drives of air conditioner and machine tool spindle drives. In order to maximize the efficiency in such applications, this paper is proposed the optimal control method of the armature current. The controllable electrical loss which consists of the copper loss and the iron loss can be minimized by the optimal control of the armature current. The minimization of loss is possible to realize efficiency optimization control for the proposed IPMSM The proposed control algorithm is applied to IPMSM drive system, the operating characteristics controlled by efficiency optimization control are examined in detail by simulation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 추계학술대회
• /
• pp.4-6
• /
• 2019

본 논문은 Modular Scalable Inverter System에서 큰 부피를 차지하는 인덕터를 저감하기 위한 방법을 제안한다. 최근 전력분야에서는 모듈형 전력변환 시스템을 사용함으로써 다양한 시스템에 필요한 전력을 공급하여 효율을 증가시키고 신뢰성을 높이는 방법들이 대두되고 있다. 하지만 모듈을 병렬로 사용하는 경우에는 모듈 간에 흐르는 순환 전류가 발생하게 된다. 이런 순환전류는 부하로 전력을 공급하지 않기 때문에 시스템 효율을 떨어트리고 전류제어 및 부하 분담을 방해한다. 따라서 병렬형 인버터에는 출력에 순환전류 저감을 위한 인덕터를 사용해야 한다는 단점이 있다. 모듈형 전력변환 장치에서 큰 크기의 출력 인덕터는 시스템 사이즈를 늘리고 비용을 증가시키고 전력밀도가 낮아지게 된다. 따라서 GaN HEMT (Gallium Nitride High Electron Mobility Transistor) 기반 인버터와 순환전류 저감 알고리즘을 사용하여 고속 스위칭을 함으로써 동일한 순환전류 저감 성능을 확보하지만 출력 인덕터의 크기를 줄이는 방안을 제시한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.926-928
• /
• 2004

For the permanent magnet synchronous motor(PMSM) drive to operate above the base speed in the constant horsepower region, field weakening control is applied. But field weakening control was not almost applied to sensorless control of the permanent magnet synchronous motor. In this paper, field weakening control is applied to the sensorless control of PMSM based on an instantaneos reactive power. And the effectiveness of the proposed system is verified by the experimental results.