• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.248-248
• /
• 2010

We have demonstrated new functionalities of Ag-doped chalcogenide glasses based on their capabilities as solid electrolytes. The influence of silver on the properties of the newly formed materials is regarded in terms of diffusion kinetics, and Ag saturation is related to the composition of the hosting material. Silver saturated in chalcogenide glass has been used in the formation of solid electrolyte, which is the active medium in the programmable metallization cell (PMC) device. In this paper, we investigated the optical properties of Ag-doped chalcogenide thin film by He-Ne laser beam exposure, which is concerned with the Ag-doping effect of PMCs before or after annealing. Chalcogenide bulk glass was fabricated by a conventional melt quenching technique. Amorphous chalcogenide and Ag thin films were prepared by e-beam evaporation at a deposition rate of about $4\;{\AA}/sec$. As a result of resistance change with laser beam exposure, the resistance abruptly dropped from the initial value of $1.4\;M{\Omega}$ to the saturated value of $400\;{\Omega}$.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.4
• /
• pp.265-273
• /
• 2001

The sea urchin has been used as sea food in many countries. This species has also been an important organism of embryological studies for more than a century. In recent years, sea urchin embryos are being used as testing materials for toxicity of pollutants and toxins. Usefulness of sea urchin embryos as experimental models comes from the easiness in obtaining sea urchin samples and a lot of gametes, in rearing embryos in the laboratory, in observing the cellular movement and organ formation during the embryogenesis and in manipulating blastomeres and genetic maferials. The sea urchin in itself is a key organism for the understanding of deuterostome evolution from the protostomes and of indirect development of marine invertebrates which undergo the planktotrophic larval stage. A fertilized sea urchin egg goes through rapid cleavage and becomes a 60 cell embryo 7hr after fertilization. It then develops into a morula, a blastula, a gastrula and finally a pluteus larva approximately 70 hr after fertilization. At the 60 cell stage, the embryo comprises of five territories that express territory-speciflc genes and later form different organs. Micromeres at the vegetal pole ingress into the blastoceol and become the primary mesenchyme cells(PMCs). PMCs express genes involved in skeletogenesis such as SM30, SM37, SM50, PM27, msp130. Among the genes, SM37 and SM50 are considered to be members of a gene family which is characterized by early blastula expression, Glycine-Proline-Glutamine rich repeat structures and spicule matrix forming basic proteins. Genetic studies on the sea urchin embryos help understand the molecular basis of indirect development of marine invertebrates and also of the biomineralization common to the animal kingdom.

• International Journal of CAD/CAM
• /
• v.12 no.1
• /
• pp.20-28
• /
• 2012

Finite Element Analysis (FEA) is often used to identify local stress/strain concentrations where a component is likely to fail. In order to reduce the degree of strain concentration, component thickness can be increased in those regions, or a stronger material can be used. In short fiber reinforced composite materials, strength and stiffness can be increased through proper fiber alignment. The field-aided microtailoring (FAiMTa) process is one promising method for doing this. FAiMTa uses principles of dielectrophoresis to preferentially align particles or fibers within a matrix. To achieve the preferred fiber orientation, an interdigitated electrode network must be integrated into the mold halves which can be fabricated by additive manufacturing (AM) processes. However, the process of determining the preferred fiber arrangements and electrode locations can be very challenging. This paper presents algorithms to semi-automate the interdigitated electrode design process. The algorithm has been implemented in the Solidworks CAD system and is demonstrated in this paper.

• Elastomers and Composites
• /
• v.55 no.3
• /
• pp.167-175
• /
• 2020

Various studies have been conducted to improve silica dispersion of silica filled tire tread compounds; among them, silica wet masterbatch (WMB) technology is known to be suitable for manufacturing silica filled compounds that have high silica content and high dispersibility. Till now, the WMB study is focused on the natural rubber (NR) or emulsion styrene-butadiene rubber (ESBR) that does not have a silica-affinity functional group, and a study of NR or ESBR having a silica-affinity functional group is still not well known. Unlike the dry masterbatch technology, the WMB technology can solve the problems associated with the high Mooney viscosity when applied to silica-friendly rubber. However, a coagulant suitable for each functional group has not yet been determined. Therefore, in this study, different coagulant applied silica WMB was prepared by applying calcium chloride, sulfuric acid, acetic acid, and propionic acid by using a carboxyl group functionalized reversible addition fragmentation chain transfer ESBR. The evaluation of the WMB compounds revealed that the calcium chloride added WMB compound showed excellent silica dispersion, abrasion resistance, and rolling resistance.

• Journal of the Korean Society of Safety
• /
• v.38 no.2
• /
• pp.1-7
• /
• 2023

Fiber-metal laminates (FMLs) and polymer matrix composites (PMCs) are formed in various ways. In particular, FMLs in which aluminum is laminated as a reinforced layer are widely used. Also, glass fiber-reinforced plastics (GFRPs) are generally applied as fiber laminates. The bonding interface layer between the aluminum and fiber laminate exhibits low strength when subjected to hot press fabrication in the event of delamination fracture at the interface. This study presents a simple method for strengthening the interface bonding between the aluminum metal and GFRP layer of FML composites. The surfaces of the aluminum interface layer are engraved with three kinds of patterns by using the laser machine before the hot press works. Furthermore, the effect of the laser patterns on the interfacial toughness is investigated. The interfacial toughness was evaluated by the energy release rate (G) using an asymmetric double cantilever bending specimen (ADCB). From the experimental results, it was shown that the strip type pattern (STP) has the most proper pattern shape in GFRP/Al FML composites. Therefore, this will be considered a useful method for the safety assessment of FML composite structures.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.11
• /
• pp.4899-4906
• /
• 2016

Aim: To assess the diagnostic utility of serum and salivary interleukin 6 (IL-6) levels in the differential diagnosis of potentially malignant lesions and conditions (PMLs/PMCs) and oral squamous cell carcinoma (OSCC) in a high oral cancer prevalence region. Methods: After appropriate ethical clearance and informed consent, salivary and blood samples were collected from 100 participants in each group (OSCC, PMLs, and healthy controls). Serum and salivary IL-6 levels were measured by enzyme-linked immunosorbent assay and data were subjected to appropriate statistical analysis. Results: Significant differences in IL-6 concentration were noted between OSCC and PML/C patients in both serum and saliva, with salivary levels being 2 to 3 fold higher than serum values in all the groups. Receiver operating characteristic curve analysis demonstrated 96% specificity and 99% sensitivity for salivary IL-6 in differentiating PML from OSCC. Conclusions: The results of the present study suggest that the pro-inflammatory cytokine, IL-6, is elevated in the saliva of patients with OSSC compared to PMD and controls, and thus may prove to have diagnostic and/or prognostic significance.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.6
• /
• pp.615-624
• /
• 2010

The aims of this study were to investigate and confirm the occurrence and distribution patterns of synthetic musk compounds (SMCs) in Nakdong river basin (mainstream and its tributaries). 4 (HHCB, AHTN, AHMI and ADBI) out of 6 polycyclic musk compounds (PMCs) and 1 (musk xylene, MX) out of 5 nitro musk compounds (NMCs) were detected in 29 sampling sites and HHCB (>50%) was predominant compound followed by musk ketone (MK) and AHTN. The total concentration levels of SMCs on February 2009 and on September 2009 in surface water samples ranged from N.D. to 2147 ng/L and N.D. to 1386 ng/L, respectively. The highest concentration level of SMCs in the mainstream and tributaries in Nakdong river were Goryeong and Jincheon-cheon, respectively. The sewage treatment plants (STPs) along the river affect the SMCs levels in river and the SMCs levels decreased with downstream because of dilution effects.

• Convergence Security Journal
• /
• v.18 no.3
• /
• pp.149-161
• /
• 2018

The private military company(PMC) or the private military industry may be one of the most important, but little understood developments in security studies to have taken place over the last decade. This new industry, where firms not only supply the goods of warfare, but rather fulfill many of the professional service functions, is not only significant to the defence community, but has wider ramifications for global politics and warfare. The private military industry emerged in the early 1990s. Its underlying cause was the confluence of three momentous dynamics - the end of the Cold War and the vacuum this produced in the market of security, transformations in the nature of warfare, and the normative rise of privatization. In order to introduce MPFs(Military Provider Firms) into Korea, where in principle private citizens are prohibited to own a gun, unlike the United States, a special law should be enacted which allows them to possess weapons and fight in combat. Therefore, the National Assembly of Korea has been submitting and discussing "the Act on the Prevention and Conduction of Practice of Piracy" since 2014.

• Microbiology and Biotechnology Letters
• /
• v.32 no.3
• /
• pp.243-248
• /
• 2004

Production of (R)-3-hydroxybutyric acid (R3HB) by fed-batch culture and continuous culture of metabolically engineered Escherichia coli harboring Ralstonia eutropha PHB biosynthesis and depolymerase genes was examined in a 30 1 pilot-scale fermentor. A new stable two-plasmid system, pBRRed containing the R. eutropha PHB depolymerase gene and pMCS 105 containing the R. eutropha PHB biosynthesis genes, was developed. Among a variety of E. coli strains harboring plasmids, recombinant E. coli XL-10 Gold (pBRRed, pMCS105) was able to produce R3HB with the highest efficiency in a batch culture. By the fed-batch culture of recombinant E. coli XL-10 Gold(pBRRed, pMCS 105) in a 30 1 fer-mentor, the final R3HB concentration was 22.4 g/l giving a productivity of 0.97 g/l-h. To produce R3HB to a high concentration with high productivity, a new strategy of fed-batch culture followed by a continuous culture was investigated. The maximum productivity and R3HB concentration were 5.06 g/l-h and 25.3 g/l, respectively. These results show that economical production of R3HB is possible by recombinant E. coli in large scale.

• Korean Security Journal
• /
• no.17
• /
• pp.337-360
• /
• 2008

Since the Cold war, many countries in the world have reduced the number of their military personnel. However, it is also factual that regional conflicts have been incessantly occurring around the world. In turn, specific governmental policies are also needed in certain countries. Recently, a resolution growingly accepted in the advanced countries is the outsourcing of the resources and services of private military companies, which benefits for governments to manage their military force efficaciously. The utilization of private military force, however, may potentially generate ethical and practical issues because of the non-specified international codes to regulate private military companies, the political misuse of private personnel without concerning the loss of public military employees in danger zones, the safety of private personnel in the field, and the possibility of genocide. Prior to accept a private military companies which may be adequate in the environment of the Korean military, it is necessary to review previous cases of foreign countries. In addition, it is also needed to determine the plausible boundaries of the operation of private military companies with taking into consideration of the situations of the Korean military and private business. Finally, the systemic governmental support is requested in order to foster the business of private military.