• 제목/요약/키워드: PLlF

검색결과 38건 처리시간 0.022초

Phase Locked Loop Sub-Circuits for 24 GHz Signal Generation in 0.5μm SiGe HBT technology

  • Choi, Woo-Yeol;Kwon, Young-Woo
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제7권4호
    • /
    • pp.281-286
    • /
    • 2007
  • In this paper, sub-circuits for 24 GHz phase locked 100ps(PLLs) using $0.5{\mu}m$ SiGe HBT are presented. They are 24 Ghz voltage controlled oscillator(VCO), 24 GHz to 12 GHz regenerative frequency divider(RFD) and 12 GHz to 1.5 GHz static frequency divider. $0.5{\mu}m$ SiGe HBT technology, which offers transistors with 90 GHz fMAX and 3 aluminum metal layers, is employed. The 24 GHz VCO employed series feedback topology for high frequency operation and showed -1.8 to -3.8 dBm output power within tuning range from 23.2 GHz to 26 GHz. The 24 GHz to 12 GHz RFD, based on Gilbert cell mixer, showed 1.2 GHz bandwidth around 24 GHz under 2 dBm input and consumes 44 mA from 3 V power supply including I/O buffers for measurement. ECL based static divider operated up to 12.5 GHz while generating divide by 8 output frequency. The static divider drains 22 mA from 3 V power supply.

층류 예혼합 화염의 예열공기 연소특성 (Characteristics of Preheated Air Combustion in a Laminar Premixed Flame)

  • 이종호;이승영;한재원;장영준;전충환
    • 대한기계학회논문집B
    • /
    • 제26권7호
    • /
    • pp.1039-1046
    • /
    • 2002
  • Co-flow axisymmetric laminar premixed flame of methane was used to study the influence of air temperature and $N_2$ addition on the flame structure, temperature field and emission characteristics. OH 2-D images and temperatures along the centerline were measured experimentally by PLIF and CARS techniques respectively to observe the influences of dilution and thermal effects of $N_2$ in the gas mixture. Also, the concentration of NOx was measured at each condition by gas analyser to see the suppression effect of N2 addition on NOx emissions. It was found that OH concentrations distribute widely as air temperature goes higher, while the effect of $N_2$ addition is not significant. But $N_2$ addition highly contributes to the flame front and NOx emissions which was argued to be due to the reduction of flame temperature. In accordance with experimental study, numerical simulation using CHEMKlN code was carried out to compare the temperature results with those acquired by CARS measurement, and we could find that there is good agreement between those results.

Calibration of frequency propagation channel sounder based on five-port reflectometer

  • Yem Van;Braga Judson;Huyart B;Begaud X;de Sousa F.R;Huyen Nguyen Bich
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
    • /
    • pp.23-26
    • /
    • 2004
  • Five-port reflectometer which consists of a ring with 5 arms (two inputs, three outputs) and three RF power detectors has been used as a vector network analyser, a demodulator in the homodyne receiver as well as in Phase Looked Loop (PLL) and so on. Calibration of five-port reflectometer is an important task. In this paper, we present a calibration method of five-port for a propagation channel sounder. The method is based on measurement of the phase differences between the three voltages at the five-port's outputs in order to determine the ratio of two input incident waves. The frequency channel sounder based on five-port is calibrated for each frequency from 2.2 GHz to 2.6 GHz with 1 MHz step. This method can also determine the absolute delays of each propagation path in the propagation channel. The calibration method is validated using measurement data.

  • PDF

UWB 응용을 위한 고주파 CMOS VCO 설계 및 제작 (A Design on High Frequency CMOS VCO for UWB Applications)

  • 박봉혁;이승식;최상성
    • 한국전자파학회논문지
    • /
    • 제18권2호
    • /
    • pp.213-218
    • /
    • 2007
  • 본 논문에서는 CMOS 0.18 ${\mu}m$ 공정을 이용하여 DS-CDMA UWB용 고주파 VCO를 설계하고 제작하였다. 위상 잡음 특성을 좋게 하기 위해서 PMOS, NMOS 소자를 대칭으로 구성한 complementary cross-coupled LC 발진기 구조로 설계하였고, varactor를 이용하여 주파수를 조정하였다. 또한 전류원의 1/f 잡음 신호를 줄이기 위해 저항을 이용하여 전류원을 구성하였다. 스펙트림 분석기를 이용한 측정을 위해 칩 내부에 고속 동작을 위한 인버터 버퍼를 추가로 설계하였다. 제작한 VCO의 core size는 $340{\mu}m{\times}535{\mu}m$이고, 측정한 VCO의 위상 잡음은 1-MHz offset에서 -107 dBc/Hz의 특성을 나타내고, 주파수 조정 범위는 $7.09{\sim}7.52$ GHz의 특성을 보인다 Harmonic suppression은 32 dB, VCO core의 전류 소모는 1.8 V 공급 전압에서 2 mA의 저전력 소모를 나타내도록 설계하였다.

3상 인버터 시스템에서 주파수 특성을 고려한 필름 콘덴서의 DC-link 적용 방법에 관한 연구 (The study on DC-link Film Capacitor in 3 Phase Inverter System for the Consideration of Frequency Response)

  • 박현수
    • 한국산학기술학회논문지
    • /
    • 제19권4호
    • /
    • pp.117-122
    • /
    • 2018
  • 대용량 3상 시스템 에어컨은 최근 들어 소비 전력 저감을 위해 인버터 회로를 포함하고 있다. 인버터 회로는 교류를 다이오드를 통해 정류하고 DC-link 전원부 콘덴서에 의해 평활된 직류를 사용한다. 이 때 평활에 사용되는 DC-link 전원부 콘덴서는 전압 리플, 전류 리플 조건을 만족하기 위해 전해 콘덴서가 일반적으로 사용된다. 콘덴서의 용량을 줄이게 되면 회로부의 크기 및 무게, 비용을 줄일 수 있게 된다. 본 논문에서는 최소점 추정 PPL(Phase Locked Loop) 위상 제어와 평균 전압 d축 전류제어 기법을 조합하여 입력 리플 전류를 약 90% 저감하는 알고리즘을 제안한다. 입력 리플 전류의 감소로 인해 DC-link 콘덴서의 전류 리플도 감소하므로 콘덴서의 용량을 줄일 수 있지만 전해 콘덴서의 경우 등가 직렬 저항(ESR : Equivalent Series Resistance)이 크기 때문에 발열로 인한 수명이 한계를 가진다. 본 논문에서는 전해 콘덴서 대신 DC-link 단에 전류 리플을 고려한 필름 콘덴서를 선정하는 방법을 제안한다. 필름 콘데서의 정전 용량 선정, 내압 선정, RMS(Root Mean Square) 전류 용량, RMS 전류 주파수 해석을 고려해 콘덴서의 용량을 선정할 경우 1680uF의 전해 콘덴서를 20uF로 용량을 낮추어 설계함으로써 전원부 콘덴서의 크기 및 무게, 비용을 줄였으며 전동기 구동을 통해 동작을 확인하였다.

2.4GHz ISM 대역 응용을 위한 저전력 CMOS Fractional-N 주파수합성기 설계 (Design of a Low-Power CMOS Fractional-N Frequency Synthesizer for 2.4GHz ISM Band Applications)

  • 오근창;김경환;박종태;유종근
    • 대한전자공학회논문지SD
    • /
    • 제45권6호
    • /
    • pp.60-67
    • /
    • 2008
  • 본 논문에서는 Bluetooth, Zigbee, WLAN 등 2.4GHz 대역 ISM-band 응용 분야를 위한 저 전력 주파수 합성기를 설계하였다. 저 전력 특성을 얻기 위해 전류소모가 큰 VCO, prescaler, ${\Sigma}-{\Delta}$ modulator 등의 전력소모를 최적화하는데 중점을 두고 설계하였다. VCO는 전력소모 측면에서 유리한 NP-core 유형의 구조를 선택하여 위상잡음 특성과 전력소모를 최적화하였으며, prescaler는 정적 전류소모가 거의 없는 동적 회로 기술이 적용된 D-F/F을 사용하여 전력소모를 줄였다. 또한 다수의 로직으로 구성되는 3차 ${\Sigma}-{\Delta}$ modulator는 'mapping circuit'으로 구조를 단순화하여 작은 면적과 저 전력소모 특성을 갖도록 하였다. $0.18{\mu}m$ CMOS 공정으로 IC를 제작하여 성능을 측정한 결과 설계된 주파수 합성기는 1.8V 전원전압에서 7.9mA의 전류를 소모하고, 100kHz offset에서 -96dBc/Hz, 1MHz offset에서 -118dBc/Hz의 위상 잡음 특성을 보였다 또한 spur 잡음 특성은 -70dBc이며, 25MHz step의 주파수 변화에 따른 위상 고정 시간은 약 $15{\mu}s$이다. 설계된 회로의 칩 면적은 pad를 포함하여 $1.16mm^2$이며 pad를 제외한 면적은 $0.64mm^2$이다.

위성통신 시스템용 위상 고정 루프 주파수 합성기의 위상 잡음 예측 모델 (Phase Noise Prediction of Phase-Locked Loop frequency Synthesizer for Satellite Communication System)

  • 김영완;박동철
    • 한국전자파학회논문지
    • /
    • 제14권8호
    • /
    • pp.777-786
    • /
    • 2003
  • 본 논문에서는 위성통신에서 사용되는 주파수 합성형 발진기에 대한 위상 잡음원을 분석하고, 주파수 합성기 출력 신호의 위상 잡음 스펙트럼 분포를 보다 더 정확히 예측할 수 있는 위상 잡음 모델을 제안하였다 기준 발진기 및 전압 제어 발진기 출력 주파수를 분주하는 분주기의 위상 잡음을 해석하고, 기준 발진기와 전압 제어 발진기 위상 잡음은 Leeson 모델을 이용하여 1/f$^2$ 이외에 다른 기울기 특성을 갖는 위상 잡음 성분들을 모델링하였다. PLL 발진기에서 각 구성 요소들에 의해 발생되거나 더해지는 잡음은 유용한 신호에 비하여 매우 작으므로 중첩의 원리를 적용하고, 선형 시스템 영역에서 주파수 합성기 회로를 해석하였다. 정립된 위상 예측 모델을 기만으로 주파수 합성기 구성 형태에 따라 각 구성 요소들의 위상 잡음 모델을 적용하여 위성통신용 주파수 합성기의 위상 잡음 스펙트럼 특성을 예측하고, 주파수 합성기를 제작하여 예측 모델과 비교 평가하였다.

광대역 멀티미디어 시스템을 위한 다채널 중간 주파수 송수신기 설계 및 성능 분석 (Design and Performance Analysis of the Multichannel I. F. Transceiver for Broadband Multimedia System)

  • 김성철
    • 한국정보통신학회논문지
    • /
    • 제15권5호
    • /
    • pp.1038-1044
    • /
    • 2011
  • 본 논문에서는 초고속 광대역 무선 멀티미디어 서비스를 양방향으로 제공하는 시스템을 위한 다 채널 중간주파수 변환 모듈을 설계하고 성능을 분석하였다. 먼저 송수신기를 구성하는 각 부분에 대한 기본적인 이론을 소개하고 이를 바탕으로 송수신부를 설계하고 각 모듈별로 무 변조, 변조시의 특성 및 광 대역 다 채널 신호의 발생과정에서의 채널에 따른 특성을 시간 및 주파수 영역에서 측정하였다. 송수신부의 국부 발진 신호의 위상잡음 특성은 70dBc/kHz 이하로 특성이 우수하다. 대역내 주파수 특성은 송수신 특성이 평탄하게 측정되었다. 한편 송수신기의 자동이득조절 기능은 상당히 우수한 것으로 나타났다. 또한 이웃채널 간섭의 영향과 스퓨리어스 방사에 대한 성능분석도 하였다.