• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.29-37
• /
• 1999

In this study, we have prepared PLT thin films having various La concentrations by using sol-gel method and studied on the effect of La concentration on the electrical properties of PLT thin films. As the La concentration increases from 5mol% to 28mol%, the dielectric constant at 10kHz increases from 428 to 761, while the loss tangent decreases from 0.063 to 0.024. Also, the leakage current density at 150kV/cm has a tendency to decrease from 6.96${\mu}A/cm^2$ to 0.79${\mu}A/cm^2$. In the result of hysteresis loops of PLT thin films, the remanent polariation and the coercive field decrease from 9.55${\mu}C/cm^2$ to 1.10${\mu}C/cm^2$ and from 46.4kV/cm to 13.7kV/cm, respectively. With the result of the fatigue test on the PLT thin films, we have found that the fatigue properties are improved remarkably as the La concentration increases from 5 mol% to 28mol%. In particular, the PLT28) has paraelectric phase and its charge storage clensity and leakage current density at 5V are 134fC/${\mu}cm^2$ and 1.01${\mu}A/cm^2$, respectively. The remanent polarization and coercive field of the PLT(10) film are 6.96${\mu}C/cm^2$ and 40.2kV/cm, respectively. After applying of $10^9$ square pulses with ${\pm}5V$, the remanent polarilzation of the PLT(10) film decreases about 20% from the initial state. In the results, we conclude that the 10mol% and the 28mol% La doped PLT thin films are very suitable for the capacitor dielectrics of new generation of DRAM and NVFRAM respecitively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.1-8
• /
• 2002

In order to study electric properties of (Pb$\_$0.9/La$\_$0.1/)Ti$\_$0.975/O$_3$(PLT (10)) films with varying excess lead concentration (7.5, 10, 12.5, 15 ㏖% excess lead), the PLT films were deposited by sol-gel process. DTA analyses reveal that the crystallization temperature of the precursor powers decreased with increasing amount of excess lead. XRD patterns of PLT reveal pure perovskite structure and the preferred orientation increased with increasing Pb content in the films. With increasing amount of excess P$\_$b/, the relative permittivity ($\xi$$\_$r/) increased and leakage current density at 100 ㎸/cm transformed 4.01$\times$10$\^$-5/, 2.42$\times$10$\^$-6/, 1.27$\times$10$\^$-6/, 1.56$\times$10$\^$-6/A/㎠ respectively. In the results of hysteresis loops measured at 166 kV/cm, the remanent polarization (P$\_$r/) and the coercive field (E$\_$c) are 6.36$\mu$C/cm and 58.7 ㎸/cm, respectively (at 12.5 ㏖% excess P$\_$b/) With increasing amount of excess Pb, the remanent polarization for PLT thin film degraded to about 44%, 27%, 15%, 16% of the initial value after 10$\^$9/ cycles./TEX>) With increasing amount of excess Pb, the remanent polarization for PLT thin film degraded to about 44%, 27%, 15%, 16% of the initial value after $10^{9}$ cycles.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.1
• /
• pp.253-256
• /
• 2014

Background: The standard treatment in the metastatic colorectal cancer consists of 5-FU based infusional regimens. However, with oral fluoropyrimidines, equal tumor responses may be obtained. Capecitabine causes macrocytosis of the cells by inhibition of DNA synthesis. In this context, a relationship was found between mean corpuscular volume (MCV) and response to therapy in breast cancer patients treated with Capecitabine, but whether this relationship also pertains in colorectal cancer has not been established. Materials and Methods: A total of 102 metastatic colorectal cancer patients treated with a oxaliplatin (XELOX)${\pm}$Bevacizumab combination were retrospectively evaluated. Patients were randomized into three groups. Hematological parameters (MCV, MPV, PCT, PLT, NLR) were recorded retrospectively, before treatment and after 3 cycles of chemotherapy. Results: After three cycles of therapy, 20 (19.6%) patients had progressive disease (PD), 41 (40.1%) had stable disease (SD), and 41 (40.1%) demonstrated a partial response (PR). In 62 (60.7%) treatment was with capesitabin plus XELOX therapy, and in 40 (39.2%) it was XELOX-Bevacizumab combination therapy. There was no difference among three groups before the treatment in terms of MCV, MPV, PCT, PLT, and NLR. MCV showed significant increase in chemotherapy response groups (PR and SD). In addition, a significant decrease was observed for platelet count in chemotherapy response groups. While NLR decrease was seen in only a PR group, PCT decrease was observed in all three groups. PCT and PLT values were higher in patients receiving Bevacizumab. Conclusions: PLT, PCT, MPV, and NLR values were decreased due to Capecitabine-based chemotherapy, however MCV was increased. PCT and PLT values were higher in patients who received Bevacizumab than those who did not. MCV, PLT, and NLR can be considered as important factors in predicting response to colorectal carcinoma treatment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1273-1279
• /
• 1994

There are 3 cases that only permissive left-turn(PLT) vehicles use the possible lane for PLT. In these cases, left turn and through movements can not be included in the same lane group, hence saturation flow rate and left turn adjustment factor of PLT are obtained separately from through movement. In capacity analysis procedures at signalized intersection with PLT phasing, PLT capacity should be known to discriminate among 3 cases stated above. The capacity is directly used not only to get saturation flow rate and left turn adjustment factor, but as a threshold for the feasibility of PLT control. This study calculated through field data the critical gap and minimum headway of left turn which affect the PLT capacity. The capacity was obtained by using theoretical models, which consequently could be used to calculate the saturation flow rate and left turn adjustment factor.

• Journal of Sensor Science and Technology
• /
• v.7 no.1
• /
• pp.51-60
• /
• 1998

La-modified $PbTiO_{3}$(PLT) thin plates were prepared for the fabrication of PLT pyroelectric IR sensors. The effects of the preparation parameters such as tile sintering temperature, the La content, and the ambient powder quantity, on the microstructural and dielectric properties of PLT thin plates were investigated by X-ray diffraction, scanning electron microscope, and measurements of relative density and dielectric properties. With an increased La content, the tetragonality c/a was decreased but the densification and the grain size were increased, which is considered to be due to the increased Pb vacancy concentration to maintain charge neutrality at the increased of La content. When the quantity of the ambient powder wvas increased, the tetragonality was slightly increased, which is believed io be due to the reduced evaporation of PbO. But the e(fect is insignificant compared to that of La content. The dielectric constant at room temperature was increased and the Curie temperature was decreased in accordance with the decreased tetragonality ratio c/a with the increase of La content. The dielectric constant and tan ${\delta}$ of $500{\mu}m$ thick PLT thin plate with 10 wt% excess PbO and 10 mol% La contant sintered at $1250^{\circ}C$ for 2 hours in ambient powder of $0.02\;g/cm^{3}$ were 360 and 0.02, respectively.

• Korean Journal of Optics and Photonics
• /
• v.7 no.1
• /
• pp.44-50
• /
• 1996

• Food Science and Preservation
• /
• v.30 no.2
• /
• pp.300-310
• /
• 2023

This study was carried out to investigate the effect of the extraction conditions for persimmon (Diospyros kaki Thunb.) leaf tea (PLT) on its color quality and antioxidant properties. The amount of persimmon leaf (PL) powder and pH influenced the PLT's color and antioxidant capacity. As the amount of PL powder in tea increased, lightness decreased while yellowness increased. The PLT with the highest amount of PL (10 mg/mL) exhibited the highest 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activity and ferric reducing antioxidant power (FRAP). In addition, the PLT with the highest PL showed the highest total polyphenol and flavonoid contents. Subsequently, PLT was prepared using 10 mg/mL PL powder under varying pH conditions. As pH increased from 4 to 7, lightness decreased while redness and yellowness increased. Antioxidant capacity was determined using 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity and FRAP assay showed that lower pH exhibited higher antioxidant capacity. The PLT extracted under the lowest pH of 4 showed higher polyphenol and flavonoid contents than that extracted under higher pH conditions. Overall, PLT extraction using a solvent with pH 4.0 showed better antioxidant activities and higher amounts of polyphenolic compounds. Simultaneously, lesser lightness, redness, and yellowness were detected in PLT extracted under pH 4 conditions. In conclusion, to acquire a better functional health benefit in terms of antioxidant capacity, preparing PLT under pH 4 conditions is suggested.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.5
• /
• pp.247-252
• /
• 2002

$(Pb_{1-x}La_x)TiO_3$ (x = 0.1) thin films were prepared on ITO-coated glass substrates by metal organic chemical vapor deposition using ultrasonic spraying. Effects of the post-annealing and the seeding layer on crystallization, microstructures and electrical properties of thin films were investigated. Dielectric constants of films increased due to the modification of crystallization and the changing of a surface morphology by applying the post-annealing. In addition, as the application of PT seed- ing layer offered nucleation sites to PLT thin films, electrical properties of films were enhanced by the increase of crys-tallinity and grain size. The dielectric constant of the films post-heated for 60 min and with a seeding layer was 213 at 1 kHz.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.5
• /
• pp.22-31
• /
• 1997

We have measured the optical properties, thickness, and energy band gap of the P $b_{1-x}$/100/L $a_{x}$100/ $Ti_{1-}$0.25x/100/ $O_{3}$ (PLT(x)) thin film prepared by the sol-gel method with varying the La concentration, x, fyom 15 nto 33 mol%. We have obtained the values from the tranmission spectrum and employed the envelope method in anayzing the spectrum. We have also performed the simulation of the transmission spectrum on the PC (personal computer) to verify the accuracy of the values 15 to 33mol%, the refractive index (at .lambda.=632.8nm) increases from 2.39 to 2.44. The extinction coefficient does not depend on the la concentration but mainly on te wavelength, and has the values between 0.2 and 0.5 at the wavelength shorter than 330nm and between 0.001 and 0.008 at the wavelength longer than 700nm. The energy band gap of the PLT (x) thin film has been obtained on the assumption of the direct band-to-band transition. It decreases from 3.28 to 3.17eV as the La concentration increases from 15 to 33 mol%. The thickness of the PLT(x) thin film has been also obtained in high accuracy by the envelope method..

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.395-397
• /
• 2002

Dielectric thin films of Pb$\_$0.72/La$\_$0.28/Ti$\_$0.93/O$_3$(PLT(28)) have been deposited on Pt(111)/Ti/SiO$_2$/Si(100) substrates in-situ by pulsed laser deposition using different annealing and deposition processes. We have investigated the effect of hydrogen annealing on the ferroelectric properties of PLT thin films and found that the annealing process causes the diffusion of hydrogen into the ferroelectric film resulting in the destruction of polarization. Two-step process to grow PLT films was adopted and verified to be useful to enlarge the grain size of the film. Structural properties including dielectric constant, and ferroelectric characteristics of PLT thin films were shown to be strongly influenced by grain size. The film deposited by using two-step process including pre-annealing treatment has a strong (111) orientation. However, the films deposited by using single-step process with hydrogen annealing process shows the smallest grain size.