• 제목/요약/키워드: PLS Regression

검색결과 175건 처리시간 0.025초

다변량 분석법을 이용한 Tryptophan과 Tyrosine의 형광분광법적 정량 (Simultaneous Determination of Tryptophan and Tyrosine by Spectrofluorimetry Using Multivariate Calibration Method)

  • 이상학;박주은;손범목
    • 대한화학회지
    • /
    • 제46권4호
    • /
    • pp.309-317
    • /
    • 2002
  • 형광분광법에 의하여 주성분 회귀분석(principal component regression, PCR)과 부분 최소자승법(Partial least squares, PLS)을 이용하여 아미노산(Tryptophan and Tyrosine)을 동시에 정량하는 방법에 대하여 연구하였다. 아미노산 혼합물의 형광 스펙트럼은 들뜸파장을257nm로 고정하여 측정하였다. 두 가지 아미노산이 서로 다른 농도로 혼합되어 있는 32개의 시료용액을 280nm∼500nm 범위에서 스펙트럼들을 얻었고 이를 이용하여 PCR과 PLS회귀모델을 얻었다. 두 가지 아미노산이 서로 다른 농도로 포함된 6개의 외부검정용 시료들의 스펙트럼들을 이용해서 회귀모델의 적합성을 검정하기 위하여 외부검정용 시료의 농도를 계산하였다. 계산된 농도를 이용하여 relative standard error of prediction($RSEP_a$)를 얻었고 같은 방법으로 overall relative standard error of prediction($RSEP_m$) 도 구하였다

근적외선을 이용한 온라인 석탄 성상분석 방법 (The Technology for On-line Measurement of Coal Properties by using Near-Infrared)

  • 김동원;이종민;김재성;김학종
    • Korean Chemical Engineering Research
    • /
    • 제45권6호
    • /
    • pp.596-603
    • /
    • 2007
  • 실시간 온라인 석탄 성상분석은 효율적인 석탄 화력발전소 운영을 위해 반드시 필요한 기술이다. 온라인 석탄 성상분석 기술 개발을 위해 다변량 분석기법을 사용하여 확산 반사방식을 통해 얻은 석탄의 근적외선 스펙트럼과 석탄 성상(%)[수분, 회분, 휘발분, 고정탄소, 탄소, 수소, 질소, 산소, 황], 발열량(kcal/kg)간의 관계를 조사하였다. 현재 석탄 화력발전소에서 사용하는 40여종의 석탄에서 얻은 근적외선 스펙트럼을 전처리[2차 미분, MSC(multiplicative scatter correction)]를 통해 물리적 영향을 최소화하여 석탄 성상과의 관계를 PLS(partial least squares regression), PCA(principal component analysis)의 chemometrics 기법을 이용하여 정량 분석하였다. 분석 결과 본 기법을 통해 근적외선 스펙트럼으로 석탄 성상 중 회분, 질소 그리고 황을 제외한 나머지 성분에 대해 분석이 가능함을 확인할 수 있었다. 또한 PC(PLS component)의 값을 이용하여 석탄의 종류를 구별한 다음, 다변량 통계기법을 사용하여 정량 분석한 결과, 전체 석탄을 이용해서 정량 분석한 결과에 비해 비교적 좋은 결과를 얻었다. 수분, 발열량이 실시간으로 분석 가능하여 보다 효율적인 석탄 화력발전소 운영이 가능할 것으로 예상된다.

다변량 분석법에 의한 Anionic Surfactant와 Nonionic Surfactant의 동시정량 (Simultaneous Determination of Anionic and Nonionic Surfactants Using Multivariate Calibration Method)

  • 이상학;권순남;손범목
    • 대한화학회지
    • /
    • 제47권1호
    • /
    • pp.19-25
    • /
    • 2003
  • 흡수 분광법에 의해 얻은 스펙트럼을 주성분분석(principal analysis, PCA) 으로 자료를 요약하여 주성분 회귀분서(principal component regression, PCR)과 부분 최소자승법(partial least squares, PLS)으로 음이온과 비이온 계면활성제(anionic and nonionic surfactant)를 동시에 정량하는 방법에 대하여 연구하였다. 두 가지 계면활성제가 서로 다른 농도로 혼합되어 있는 26개의 시료용액을 400~700 nm 범위에서 스펙트럼을 얻었고, 이를 이용하여 PCR과 PLS회귀모델을 얻었다. 두 가지 계면활성제가 서로 다른 농도로 포함된 5개의 외부검정용 시료들의 스펙트럼들을 이용해서 회귀모델의 적합성을 검정하기 위하여 외부검정용 시료의 농도를 계산하였다. 계산된 농도를 이용하여 relative standard error of prediction(RSEP$_{\alpha}$)를 구하여 회귀모델의 적합성을 검정하였다.

유니버설 디자인을 고려한 지체장애인 대피경로 계획요소 규명 - 장애인 종합복지관 시설을 대상으로 - (Identification of Evacuation Route Planning Elements for the Disabled by Considering Universal Design - A Study on the Welfare Center for the Disabled -)

  • 정태호;양원직
    • 한국재난정보학회 논문집
    • /
    • 제18권3호
    • /
    • pp.672-686
    • /
    • 2022
  • 연구목적: 본 연구의 목적은, 지체 장애인 대피경로 시설에 영향을 미치는 계획요인들을 도출하고, 각 시설별로 영향을 미치는 계획요소들을 규명하고자 하였다. 연구방법: 표본수의 문제와 다중공선성의 문제를 해결하기 위해 PLS(부분최소제곱) 회귀분석을 활용하였다. 연구결과: 분석결과, 각 시설별로 가장 중요한 계획요소는 출입문 : 출입문 닫히는 시간(1.131), 복도 : 휠체어를 위한 경사로(1.227), 계단 : 계단 비상조명(1.117), 대피공간 : 대피공간 편의시설(1.106)으로 도출되었다. 결론: 효율적인 장애인 대피경로를 계획하기 위해서는 일괄적인 반영이 아닌 장애인들의 인식, Needs, 만족도를 고려한 유니버설 디자인을 고려해야 한다.

Determination of Water Content in Skin by using a FT Near Infrared Spectrometer

  • Suh Eun-Jung;Woo Young-Ah;Kim Hyo-Jin
    • Archives of Pharmacal Research
    • /
    • 제28권4호
    • /
    • pp.458-462
    • /
    • 2005
  • The water content of skin was determined using a FT near infrared (NIR) spectrometer. NIR diffuse reflectance spectra were collected from hairless mouse, in vitro, and from human inner arm, in vivo. It was found that the variation of NIR absorbance band 1450 nm from OH vibration of water and 1940 nm from the combination involving OH stretching and OH deformation, depending on the absolute water content of separated hairless mouse skin, in vitro, using the FT NIR spectrometer. Partial least squares regression (PLSR) was applied to develop a calibration model. The PLS model showed good correlation. For practical use of the evaluation of human skin moisture, the PLS model for human skin moisture was developed in vivo on the basis of the relative water content of stratum corneum from the conventional capacitance method. The PLS model predicted human skin moisture with a standard errors of prediction (SEP) of 3.98 at 1130-1830 nm range. These studies showed the possibility of a rapid and nondestructive skin moisture measurement using FT NIR spectrometer.

FT-NIR spectroscopy를 이용한 현미의 총 식이섬유함량분석 예측모델 개발 (Development of Prediction Model for Total Dietary Fiber Content in Brown Rice by Fourier Transform-Near Infrared Spectroscopy)

  • 이진철;윤연희;김선민;표병식;은종방
    • 한국식품과학회지
    • /
    • 제38권2호
    • /
    • pp.165-168
    • /
    • 2006
  • 분석이 번거로웠던 현미의 총 식이섬유(TDF) 함량을 신속하면서도 친 환경적인 비파괴 분석방법인 FT-NIRS를 이용하여 예측 모델을 개발하였다. 현미는 국내산으로 전남 지방에서 재배된 47개 품종(516개 시료)에 대해서 AOAC 방법에 준한 효소법에 의해 각 측정 시료별 TDF 함량을 분석하였다. 습식 분석된 TDF 함량의 분석오차범위는 0.17-0.72% 이었다. FT.NIRS로 측정된 스렉트럼의 검량식은 빛의 산란 효과를 최소화하기 위해 수학적 처리를 하였고, 몇 개의 특정 파장이 아닌 전 파장 영역(1,000-2,500nm)에 대해서 PLS법으로 작성하였다 회귀분석과 검량식은 NIRCal chemometric software에 의해 작성되었다. 얻어진 검량식의 정확도는 상관계수(r), SEE 및 SEP로 확인하였다. 현미 중 총 식이섬유 함량에 대한 회귀분석을 행한 결과, 상관계수는 0.9780, SEE는 0.0636, SEP는 0.0642로 측정 정확도가 우수함으로 현장 적용을 위한 실용화도 가능할 것으로 판단된다.

Simultaneous Kinetic Spectrophotometric Determination of Sulfite and Sulfide Using Partial Least Squares (PLS) Regression

  • Afkhami, Abbas;Sarlak, Nahid;Zarei, Ali Reza;Madrakian, Tayyebeh
    • Bulletin of the Korean Chemical Society
    • /
    • 제27권6호
    • /
    • pp.863-868
    • /
    • 2006
  • The partial least squares (PLS-1) calibration model based on spectrophotometric measurement, for the simultaneous determination of sulfite and sulfide is described. This method is based on the difference between the rate of the reaction of sulfide and sulfite with Malachite Green in pH 7.0 buffer solution and at 25 ${^{\circ}C}$. The absorption kinetic profiles of the solutions were monitored by measuring the decrease in the absorbance of Malachite Green at 617 nm in the time range 10-180 s after initiation of the reactions with 2 s intervals. The experimental calibration matrix for partial least squares (PLS-1) calibration was designed with 24 samples. The cross-validation method was used for selecting the number of factors. The results showed that simultaneous determination could be performed in the range 0.030-1.5 and 0.030-1.2 $\mu$g m$L ^{-1}$ for sulfite and sulfide, respectively. The proposed method was successfully applied to simultaneous determination of sulfite and sulfide in water samples and whole human blood.

Determination of Ethanol in Blood Samples Using Partial Least Square Regression Applied to Surface Enhanced Raman Spectroscopy

  • Acikgoz, Gunes;Hamamci, Berna;Yildiz, Abdulkadir
    • Toxicological Research
    • /
    • 제34권2호
    • /
    • pp.127-132
    • /
    • 2018
  • Alcohol consumption triggers toxic effect to organs and tissues in the human body. The risks are essentially thought to be related to ethanol content in alcoholic beverages. The identification of ethanol in blood samples requires rapid, minimal sample handling, and non-destructive analysis, such as Raman Spectroscopy. This study aims to apply Raman Spectroscopy for identification of ethanol in blood samples. Silver nanoparticles were synthesized to obtain Surface Enhanced Raman Spectroscopy (SERS) spectra of blood samples. The SERS spectra were used for Partial Least Square (PLS) for determining ethanol quantitatively. To apply PLS method, $920{\sim}820cm^{-1}$ band interval was chosen and the spectral changes of the observed concentrations statistically associated with each other. The blood samples were examined according to this model and the quantity of ethanol was determined as that: first a calibration method was established. A strong relationship was observed between known concentration values and the values obtained by PLS method ($R^2=1$). Second instead of then, quantities of ethanol in 40 blood samples were predicted according to the calibration method. Quantitative analysis of the ethanol in the blood was done by analyzing the data obtained by Raman spectroscopy and the PLS method.

Analysis of Protein and Moisture Contents in Pea(Pisum sativum L. Using Near-Infrared Reflectance Spectroscopy

  • Jung, Chan-Sik;Kim, Byung-Joo;Kwon, Yil-Chan;Han, Won-Young;Kwack, Yong-Ho
    • 한국작물학회지
    • /
    • 제43권2호
    • /
    • pp.101-104
    • /
    • 1998
  • This study was conducted to establish a rapid analysis method for determining protein and moisture contents of pea. Ninety and eighty pea (Pisum sativum L.) lines were analyzed to determine protein and moisture contents, respectively using near-infrared reflectance spectroscopy. Simple correlations (${\gamma}$) of protein content in a ground sample and an intact grain sample by an automatic regression method were 0.978 and 0.910, respectively. Simple correlations by partial least square regression/principal component analysis (PLS/PCA) methods were 0.982 and 0.925, respectively. Standard error of performance (SEP) in protein content was the lowest value, 0.446 in ground sample by PLS/PCA methods. Simple correlation of moisture content was the highest at 0.871 in ground samples. when using a standard regression method. Accuracy for the moisture content was slightly lower than for protein content. It was concluded that the NIRS method would be applicable only for rapid determination of protein content in pea.

  • PDF

A New Calibration Method Based on the Recursive Linear Regression with Variables Selection

  • Park, Kwang-Su;Jun, Chi-Hyuck
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1241-1241
    • /
    • 2001
  • We propose a new calibration method, which uses the linearization method for spectral responses and the repetitive adoptions of the linearization weight matrices to construct a frature. Weight matrices are estimated through multiple linear regression (or principal component regression or partial least squares) with forward variable selection. The proposed method is applied to three data sets. The first is FTIR spectral data set for FeO content from sinter process and the second is NIR spectra from trans-alkylation process having two constituent variables. The third is NIR spectra of crude oil with three physical property variables. To see the calibration performance, we compare the new method with the PLS. It is found that the new method gives a little better performance than the PLS and the calibration result is stable in spite of the collinearity among each selected spectral responses. Furthermore, doing the repetitive adoptions of linearization matrices in the proposed methods, uninformative variables are disregarded. That is, the new methods include the effect of variables subset selection, simultaneously.

  • PDF