• Journal of Information Technology Applications and Management
• /
• v.22 no.3
• /
• pp.143-167
• /
• 2015

This paper addresses the issue how the total life cycle cost may be minimized and how the cost should be allocated to the acquirer and developer. This paper differentiates post life cycle change (PLCC) endeavors from PLCC activities, rigorously classifies PLCC endeavors according to the result of PLCC endeavors, and rigorously defines the life cycle cost of a software product. This paper reviews classical definitions of software 'maintenance' types and proposes a new typology of PLCC activities too. The proposed classification schemes are exhaustive and mutually exclusive, and provide a new paradigm to review existing literatures regarding software cost estimation, software 'maintenance,' software evolution, and software architecture from a new perspective. This paper argues that the long-term interest of the acquirer is not protected properly because warranty period is typically too short and because the main concern of warranty service is given to removing the defects detected easily. Based on the observation that defects are caused solely by errors the developer has committed for software while defects are often induced by using for hardware (so, this paper cautiously proposes not to use the term 'maintenance' at all for software), this paper argues that the cost to remove defects should not be borne by the acquirer for software.

• 지역과문화
• /
• v.8 no.4
• /
• pp.23-42
• /
• 2021

This article examines the legal measures to establish the financial independence of the Local Cultural Centers(LCCs) by the revision of Promotion of Local Cultural Centers Act(PLCC Act) to allow profit-making activities of LCCs. For the past 70 years, LCCs have been the core of local culture, but they have not been financially independent and have survived through government subsudues and support funds. Its weak financial structure that depends on the subsidies makes it difficult to carry out the essential business and threatens sustainability. Legally, LCCs are special corporations which established in accordance with the PLCC Act, and their legal status and functions are stipulated in accordance with the laws governing their establishment. The current PLCC Act does not stipulate that the LCC may conduct profit-making business other than the essential business. However, compare to the other special corporations which established by their own legislatives, it is understood that the PLCC Act can also provide regulations related to the profit business of LCCs. This article presents legal drafts for PLCC Act and suggests other necessary discussions for financial independence of LCCs.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.262-263
• /
• 2008

LCD 디바이스는 그 동작원리와 전기-광학적 특성에 의해 CRT와는 다른 감마곡선 특성을 갖고 있다. 대부분의 LCD디스플레이 디바이스들의 감마곡선은 CRT와는 달리 일관성을 갖지 않을 뿐 더러 흑백계조입력을 기준으로 하는 감마보정을 위해 RED, GREEN, BLUE 입력값을 세부적으로 조정할 때 각 계조입력에 대한 상관색온도가 일정한 값을 갖지 않아 LCD의 특성에 대한 모델링과 보정에 어려움이 있다. 또한, 애플사의 맥머신 그리고 실리콘 그래픽스사의 시스템과 같이 소정의 감마값을 전제로 해당 시스템의 내부참조테이블(internal look-up table)이 설계되어 각기 다른 시스템감마를 가지는 장치들에 의해 인코딩되어진 영상출력신호의 경우, 동일한 시스템을 갖추거나 시스템감마에 대한 역감마특성을 가진 디스플레이장치가 아닌 환경에서는 원본영상에 대한 왜곡은 더욱 커질 수 있다. 특히, 낮은 흑백계조입력에서의 색온도의 경우, 파장에 따라 서로 다른 감쇄성능을 가진 일반적인 컬러필터의 특성에 의한 누설광(light leakage)에 의해 결정되며, 이로 인해 색온도가 특정한 객을 띄는 현상이 발생한다. 본 논문에서는 LCD디스플레이의 감마곡선을 여러 가지 시스템감마에 대응할 수 있는 감마곡선예 일치시키고, 계조선형성을 동시에 개선하기 위하여 입력 디지털값과 삼자극치간 관계를 나타내는 여러 가지 컬러모델링 방법 중에서 PLCC(Piecewise Linear Interpolation assuming Constant Chromaticity coordinates)모델을 적용하고, 목표로 하는 감마곡선과 색온도를 만족하기 위한 새로운 입력값을 구한 후 이를 컬러참조테이블(color look-up table)예 적용하는 방법과 저계조에서의 색온도를 목표색온도에 근접시키는 방법을 제안한다.

• 전자공학회논문지 IE
• /
• v.43 no.2
• /
• pp.22-29
• /
• 2006

Recently the use of whispered speech has increased due to mobile phone and the necessity of whispered speech recognition is increasing. So various feature vectors, which are mainly used for speech recognition, are applied to their HMMs, normal speech models, whispered speech models, and integrated models with normal speech and whispered speech so as to find out suitable recognition system for whispered speech. The experimental results of recognition test show that the recognition rate of whispered speech applied to normal speech models is too low to be used in practical applications, but separate whispered speech models recognize whispered speech with the highest rates at least 85%. And also integrated models with normal speech and whispered speech score acceptable recognition rate but more study is needed to increase recognition rate. MFCE and PLCC feature vectors score higher recognition rate when applied to separate whispered speech models, but PLCC is the best when a lied to integrated models with normal speech and whispered speech.

• Clinics in Shoulder and Elbow
• /
• v.4 no.2
• /
• pp.173-180
• /
• 2001

Aim: To evaluate validity and responsiveness of four shoulder scoring systems. Material and Method: Twenty-five cases of shoulder instability(22 traumatic, 3 non-traumatic) and twenty-three cases of rotator cuff tear(12 small or medium, 10 large or massive) treated surgically were evaluated with the Shoulder Function Score of the University of Pennsylvania(Penn FS), Constant Score, UCLA Shoulder Rating Scale and Simple Shouler Test(SST), preoperatively and at final follow-up. The average follow-up was 16.0 months in instability group and 17.5 months in rotator cuff tear group. Using the SPSS program, Pearson linear correlation coefficiency(PLCC) between the scores were calculated. And to assess the construct validity, PLCC between patients' satisfaction and the scores were also calculated. Responsiveness was measured by the standardized response mean(SRM). Result: In instability group, correlation between the scoring systems was low preoperatively except between Constant and SST, but high after operation. Patients' satisfaction with the scores showed low PLCC preoperativley, but high PLCC postoperatively. SRM was high in PENN and UCLA, but when the satisfaction segment of the score was eliminated from UCLA, the SRM was the lowest. In rotator cuff tear group, there was high correlation between the scores not only preoperatively but postoperatively. And the patients' satisfaction matched well with the scores. SRM was particularly high in UCLA and SST. Even when satisfaction segment was eliminated from UCLA, the SRM was still the highest. Conclusion : Evaluation by the 4 scoring systems investigated in the study showed less consistency in instability than rotator cuff tear in terms of correlation and validity. Responsiveness was generally higher in rotator cuff tear group than in instability group except for Pennsylvania Shoulder Function Score. Therefore it is construed that use of any among the four scoring systems doesn't make difference in evaluation of rotator cuff lesions. However in instability group, care is needed because different result may be obtained according to the selection of a scoring system.

• Clinics in Shoulder and Elbow
• /
• v.10 no.2
• /
• pp.160-166
• /
• 2007

Purpose: The current study assessed the factors affecting outcomes of primary repair procedures in tears of multiple rotator cuff tendons. Materials and Methods: Among the cases of rotator cuff tears involving two or more tendons receiving operations between 1997 and 2003, The clinical results of 19 cases with more than 2 years follow-up were evaluated by the UCLA score. We evaluated the correlation of trauma, active motion, acromiohumeral distance, tear size, and surface area with the UCLA score using Pearson's linear correlation coefficient (PLCC). Results: UCLA scores increased significantly in all cases, from 9 to 26.1 on average. However, the results were good in 53%, and poor in 47% according to Ellman's criteria. Trauma, active elevation, acromiohumeral distance, and tear size did not correlate with the UCLA score, but the tear surface area was inversely correlated with the score (PLCC=-0.696). Cases with degeneration of the infraspinatus muscle above Goutallier grade III on MRI showed worse results than cases with less degeneration. Conclusion: The clinical results of primary repair of rotator cuff tears involving multiple tendons were satisfactory in 53% of patients. Large tear surface area and severe degeneration of the infraspinatus were poor prognostic factors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4378-4384
• /
• 2012

In LED chip packaging, die bonding is a very important process which fixes the LED chip on the lead frame to provide enough strength for the next process. This paper focuses on the process optimization of a LED die bonding, which attaches small zener diode chip on PLCC LED package frame, using response surface analysis. Design of experiment (DOE) of 5 factors, 3 levels and 5 responses are considered, and the results are investigated. As the results, optimal conditions those satisfy all response objects can be derived.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.574-580
• /
• 2005

Recently, the number of bridges and tunnels in railway is increasing due to the super high-speedy of train. Also, because of successively accidents of civil structures such as bridges and dams, the importance of maintenance become influential. The purpose of this study is to show the probabilistic life cycle cost analysis technique(PLCC) of the railroad bridge as pubic-infrastructures, and reasonably to indicate the economy in life cycle cost(LCC) through a case study. Rationally for life cycle cost analysis, the data gathered through many materials considered the uncertainty such as covariance. As a result, it is indicated that prestressed concrete bridge is pretty more cost-effective during life-cycle than preflex as well as steel box bridge. In future, if the construction of database and maintenance materials for railroad infrastructure is actualized, the life cycle cost analysis for railroad can be conducted easily and practically.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.971-976
• /
• 2004

The management of railroad structures is more difficult and complicate because there are many structures such as rail, bridge, tunnel, station, and so on. Therefore, LCC(Life Cycle Cost) analysis of railroad structures as public infrastructure must contain a maintenance cost as well as an initial cost in order to make a more effective management during the life cycle on the design phase. This paper presents a cost classification scheme considering user costs such as value of delayed time of passenger and freight. Also, in this study it is developed a probabilistic life cycle cost(PLCC) analysis model of railroad structures taking into account uncertainties and variations of input variables in order to analyze LCC. It may be stated that the model proposed in this study can greatly contribute to the making optimal decision, the estimate of the maintenance cost and the allocate of budget in the project of railroad structures.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3067-3069
• /
• 1999

In this paper, A bit processor for controlling sequence logic was implemented, using a FPGA. This processor consists of program memory interface. I/O interface, parts for instruction fetch and decode, registers, ALU, program counter and etc. This FPGA is able to execute sequence instruction during program fetch cycle, because of divided bus system, program bus and data bus. Also this bit processor has instructions set that 16bit or 32bit fixed width, so instruction decoding time and data memory interface time was reduced. This FPGA was synthesized by pASIC 2 SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package. Finally, the benchmark was performed to prove that Our FPGA has better performance than DSP(TMS320C32-40MHz) for the sequence logic control of PLC.