• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.176-181
• /
• 2006

In this study, systematical investigations were carried out on crystal qualifies and optical properties of $ZnSe_{1-x}:Te_x$ (x=0.002-0.04) thin films frown by molecular beam epitaxy (MBE). The crystal qualifies and optical properties have been investigated by X-ray diffraction (XRD) and Photoluminescence (PL) measurements, respectively. From the XRD measurements, the crystallographic characteristics showed mediocre crystal quality with increasing the Te composition. From the PL measurements, emission in the visible spectrum region from blue to green was obtained by varying the Te content of the ZnSe:Te epilayers. The efficient blue and green emission were attributed to the recombination of excitons trapped at isoelectronic isolated a single Te atom and $Te_n(n{\geq}2)$ clusters. respectively. The blue emission become dominant in Te tightly doped $ZnSe_{1-x}:Te_x$ $(Te=0.2\%)$ epilayers with increasing temperature. For the Te heavily doping condition $(Te=4.0\%)$, the dominant green emission could be observed at around 160K.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.211-212
• /
• 2012

ZnO submicron particles were grown on Au-catalyzed Si substrate by a vapor phase transport (VPT) growth process under different mixture gas ratio at growth temperature of $900^{\circ}C$. The structural and optical properties of the ZnO submicron particles were investigated by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and photoluminescence (PL). The ZnO submicron particles could be clustered with the $O_2/Ar$ mixture gas ratio(%) higher than 10%, and it was mainly determined by the gas ambient. Particularly, when the $O_2/Ar$ mixture gas ratio was 30%, it was observed the ZnO submicron particles with diameters in the range of 125 to 500 nm and the narrowest full width at half maximum (FWHM) of XRD and PL spectra with $0.121^{\circ}$ and 92 meV, respectively. It was found that the structural and optical properties of the ZnO submicron particles were improved with increasing the $O_2/Ar$ mixture gas ratio through the XRD and PL spectra.

• Journal of Radiation Protection and Research
• /
• v.41 no.2
• /
• pp.167-171
• /
• 2016

Background: TlBr is of considerable technological importance for radiation detection applications where detecting high-energy photons such as X-rays and ${\gamma}$-rays are of prime importance. However, there were few reports on investigating optical properties of TlBr itself for deeper understandings of this material and for making better radiation detection devices. Thus, in this paper, we report on the optical characterizations of TlBr single crystals. Spectroscopic ellipsometry (SE) and photoluminescence (PL) measurements at RT were performed for this work. Materials and Methods: A 2-inch TlBr single crystalline ingot was grown by using the vertical Bridgman furnace. SE measurements were performed at RT within the photon energy range from 1.1 to 6.5 eV. PL measurements were performed at RT by using a home-made PL system equipped with a 266 nm-laser and a spectrometer. Results and Discussion: Dielectric responses from SE analysis were shown to be slightly different among the different samples possibly due to the different structural/optical properties. Also from the PL measurements, it was observed that the peak intensities of the middle samples were significantly higher than those of the other two samples. With the given values for permittivity of free space (${\varepsilon}_0=8.854{\times}10^{-12}F{\cdot}m^{-1}$), thickness (d = 1 mm), and area ($A=10{\times}10mm^2$) of the TlBr sample, capacitances of TlBr were 6.9 pF (at $h{\nu}=3eV$) and 4.4 pF (at $h{\nu}=6eV$), respectively. Conclusion: SE and PL measurement and analysis were performed to characterize TlBr samples from the optical perspective. It was observed that dielectric responses of different TlBr samples were slightly different due to the different material properties. PL measurements showed that the middle sample exhibited much stronger PL emission peaks due to the better material quality. From the SE analysis, optical, dielectric constants were extracted, and calculated capacitances were in the few pF range.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1057-1059
• /
• 2002

ZnO-Si-ZnO multi-layer thin films have been deposited by pulsed laser deposition (PLD). And then, the films have been annealed at $300^{\circ}C$ in oxygen ambient pressure. Electrical properties of the films were improved slightly than ZnO thin film without Si layer. Also, the optical and structural properties changed by Si layer in ZnO thin film. The optical and structural properties of Si-doped ZnO thin films were characterized by PL(Photoluminescence) and XRD(X-ray diffraction method) respectively. Electrical properties were measured by van der Pauw Hall measurements.

• Journal of the Korean Vacuum Society
• /
• v.20 no.6
• /
• pp.449-455
• /
• 2011

The luminescence properties of $In_{0.5}Ga_{0.5}As/In_{0.5}Al_{0.5}As$ multiple quantum wells (MQWs) grown on $In_{0.4}Al_{0.6}As$ buffer layer have been investigated by using photoluminescence (PL) and time-resolved PL measurements. A 1-${\mu}m$-thick $In_{0.4}Al_{0.6}As$ buffer layers were deposited at various temperatures from $320^{\circ}C$ to $580^{\circ}C$ on a 500-nm-thick GaAs layer, and then 1-${\mu}m$-thick $In_{0.5}Al_{0.5}As$ layers were deposited at $480^{\circ}C$, followed by the deposition of the InGaAs/InAlAs MQWs. In order to study the effects of $In_{0.4}Al_{0.6}As$ layer on the optical properties of the MQWs, four different temperature sequences are used for the growth of $In_{0.4}Al_{0.6}As$ buffer layer. The MQWs consist of three $In_{0.5}Al_{0.5}As$ wells with different well thicknesses (2.5-nm, 4.0-nm, and 6.0-nm-thick) and 10-nm-thick $In_{0.5}Al_{0.5}As$ barriers. The PL peaks from 4-nm QW and 6-nm QW were observed. However, for the MQWs on the $In_{0.4}Al_{0.6}As$ layer grown by using the largest growth temperature variation (320-$580^{\circ}C$), the PL spectrum only showed a PL peak from 6-nm QW. The carrier decay times in the 4-nm QW and 6-nm QW were measured from the emission wavelength dependence of PL decay. These results indicated that the growth temperatures of $In_{0.4}Al_{0.6}As$ layer affect the optical properties of the MQWs.

• Journal of Construction Engineering and Project Management
• /
• v.4 no.2
• /
• pp.41-46
• /
• 2014

RCC consumes large quantities of natural resources like gravel stone and steel, and there is a need to investigate on an innovative material that utilizes limited quantities of natural resources but should have good mechanical strength. This study deals with the experimental investigation of strength evaluation of cementitious composites reinforced with polyolefin fibers from 0% to 2.5% (with interval of 0.5%), namely Polyolefin Fiber Reinforced Cementitious Composites (PL-FRCC) and developing statistical regression models for compressive strength, splitting-tensile strength, flexural strength and impact strength of PL-FRCC. Paired t-tests (for each PL fiber percentage 0 to 2.5%) bring out that there is significant difference in compressive and splitting-tensile strength when curing periods (3, 7, 28 days) are varied. Also, a strong relationship exists between the compressive and flexural strength of PL-FRCC. The proposed mathematical models developed in this study will be helpful to ascertain the mechanical strength of FRCC, especially, when the fiber reinforcing index is varied.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.328-329
• /
• 2009

This paper presents the effect of organic Ag complex sintering temperature on the MEH-PPV photoluminescence (PL) properties. MEH-PPV and organic Ag complex was coated on the glass substrate by spin coating method. The coated Ag complex was sintered in an air atmosphere. The sintering temperature was varied from 100 to $200^{\circ}C$ and sintering time was 5 min. The Ag film sintered at temperature higher than $120^{\circ}C$ shows very low sheet resistance less than $0.5\;{\Omega}{/\square}$. The coated MEH-PPV measure photoluminescence (PL) intensity at 580 nm. The PL peak was shifted to the higher wavelength with increasing the sintering temperature.

• Journal of the Korean Vacuum Society
• /
• v.2 no.3
• /
• pp.294-298
• /
• 1993

CuGaSe2 단결정을 고순도(99.9999%)의 Cu, Se 원소를 화학조성비로 칭량한 후 Se을 3mole% 과잉으로 첨가하여 합성된 ingot를 사용하여 iodine(99.9999%)을 수송매체로 한 화학수송법으로 성장시켰다. 성장된 단결정은 검정색을 띠고 있었으며, 10K에서 optical energy gap이 1.755eV로 주어졌다. Ar-ion laser로 여기시켜 측정한 photoluminescence(PL) 스펙트럼으로부터 1.667eV, 1.085eV, 1.025eV에 위치한 세 개의 PL peak를 얻었다. Thermally stimulated current(TSC) 측정에서 0.660eV, 0.720eV의 deep donor level을 관측하였으며, PL peak intensity의 thermal quenching으로 구한 activation energy는 0.010eV이었다. CuGaSe2 단결정에서 PL mechanism은 edge emission 및 donor-acceptor pair recombination임을 규명했다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.22-22
• /
• 2003

Studies on the optical properties related to the built-in internal field and the carrier localization present in various GaN-based structures are essential not only for the physical interest but in designing practical visible and ultraviolet light emitting device applications with better performance and quantum efficiency. We report on the optical characteristics of various dimensional GaN-based structures such as (i) GaN self-assembled quantum dots grown in Stranski-Krastanov mode (OD), vertically-aligned GaN nanorods (1D), graded-In-content InGaN quantum wells (2D), laterally-overgrown GaN pyramids (3D), and GaN epilayers grown on various substrates. We used a wide variety of optical techniques, such as photoluminescence (PL), PL excitation, micro-PL, cathodoluminescence, optically-pumped stimulated emission, and time-resolved PL spectroscopy. An overview and comparison of the optical characteristics of the above GaN-based structures will be given.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.3
• /
• pp.547-552
• /
• 2004

Streptomyces thermovulgans malate synthase (stMS) is known to be more thermostable and thermoactive than S. coelicolor malate synthase (scMS). Therefore, based on the amino acid sequence of stMS, 3 scMS mutants, namely P186R, T8PL9P, and T8PL9PP186R, were created by site-directed mutagenesis in an attempt to engineer a more thermoactive and thermostable enzyme. An enzymatic analysis of the wild-type and mutant MS revealed that P186R and T8PL9PP186R were more thermoactive than the wild-type scMS and T8PL9P. Furthermore, all 3 mutants exhibited a greater thermo stability than scMS, thereby suggesting that both R186 and P8P9 can cause increased thermo stability in scMS.