• 한국진공학회지
• /
• 제12권4호
• /
• pp.257-262
• /
• 2003

n-type과 p-type 다공성 실리콘 (PS)의 구조에 따른 광학적 및 전기적 특성을 조사하였다. 먼저 화학적 에칭에 의하여 다공성 실리콘 시편을 준비했다. 이 시편의 미세구조의 특징을 주로 SEM, AFM, XRD 분석에 의하여 관찰하였으며 그들의 광학적 화학적 특성을 PL과 FTIR을 통해 측정하였다. n-type다공성 실리콘의 상온 PL파장은 p-type 다공성 실리콘이 남색 영역 (400-650 nm)임에 반해 500-650 nm로 이동함을 알 수 있었다. 또한 PS층 위에 ∼40 nm 두께의 반투명한 Cu박막을 rf 스퍼터링법으로 증착하여 PS내의 pore를 Cu로 충전한 시편의 I-V 특성과 EL 특성을 관찰했다.

• 한국발생생물학회지:발생과생식
• /
• 제10권4호
• /
• pp.271-275
• /
• 2006

본 연구의 목적은 부화 후 67일 동안 대서양산 Haddock, Melanogrammus aeglefinus 치어의 초기성장을 조사하여, 본 종의 발생생물학과 양식 측면에서의 정보 제공하고자 한다. 전장성장은 $TL=3.5374e^{0.0536X}(r^2=0.8759$, TL은 전장이며, X는 부화 후 표본시일), 체중성장은 $BW=0.0002e^{0.1858X}(r^2=0.8671$, BW는 체중이며, X는 부화 후 표본시일)로 각 성장들은 지속적인 성장을 보였다. 체고와 가슴지느러미 길이는 연속적인 성장을 보여 체고성장은 $BD=0.3545e^{0.0778X}(r^2=0.9563$, BD는 체고이며, X는 부화 후 표본시일)였으며 가슴지느러미 길이성장은 $PL=0.0111e^{0.1591X}(r^2=0.9194$, PL은 가슴지느러미 길이이며, X는 부화 후 표본시일). 전장에 대한 체고의 상관관계식은 BD=0.2397X-0.5735($r^2=0.9957$, BD는 체고이며, X는 전장)이었으며 전장에 대한 가슴지느러미 길이의 상관관계식은 PL=0.1929X-1.3767($r^2=0.9882$, PL은 가슴지느러미 길이이며, X는 전장)이었다. 체고에 대한 가슴지느러미 길이성장은 PL=0.8117BD-0.9718($r^2=0.9814$, PL은 가슴지느러미 길이이며, BD는 체고)이었다. 체중에 대한 체고는 $BD=-9.4734X^2+19.046X+1.3672(r^2=0.9041$, BD는 체고이며, X는 체중)로, 체중에 대한 가슴지느러미 길이는 $PL=-6.379X^2+14.023X+0.3774(r^2=0.9494$, PL은 가슴지느러미 길이이며, X는 체중)이었다. 본 연구결과의 Haddock 치어 초기성장 특성은 Haddock 치어 사육에 도움이 될 것이다.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.122-126
• /
• 2010

In this article photoluminescence of the $Al_2O_3:xCr_2O_3$ solid solutions prepared by solid state reaction method are represented. The effect of $Cr_2O_3$-activator concentration and heat treatment time on the PL characteristics have been discussed in conjunction with microstructure of phosphor samples. The $Al_2O_3:xCr_2O_3$ phosphors show the highest PL intensity at x=0.003 mole when the samples are reacted at $1600^{\circ}C$ for 5 h. The PL emission and absorption spectra show the maximum peaks at 698 nm and at 398 nm respectively. The CIE color coordinate is (x=0.646, y=0.316) at 0.003 mole $Cr_2O_3$, which value is very close to the NTSC coordinate of red color. This characteristic feature of $Al_2O_3:xCr_2O_3$ has been applied for an additive to improve the color characteristic of other red phosphor $LiEuW_2O_8$ which has a relatively poor color purity with an emission peak centered at 615 nm and with a CIE coordinate (x=0.530, y=0.280). The $Al_2O_3:0.003Cr_2O_3$ phosphor has been mixed with the $LiEuW_2O_8$ phosphor powder and the PL characteristics and CIE color coordinates are characterized. The $Al_2O_3:xCr_2O_3$ phosphor was found effective for improving the CRI (color rendering index) of $LiEuW_2O_8$ phosphor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.423-423
• /
• 2007

In this study, the effects of annealing conditions on the structural and optical properties of ZnO films were investigated. ZnO oxide (ZnO) films were deposited onto $SiO_2$/Si substrates by RF magnetron sputtering from a ZnO target. The substrate was not heated during deposition. ZnO films were annealed in temperature ranges of $500{\sim}650^{\circ}C$ in the $O_2$ flow for 5 ~ 20 min. The film average thicknesses were in the range of 291 nm. The surface morphologies and structures of the samples were characterized by SEM and XRD, respectively. The optical properties were evaluated by PL measurement at room temperature using a He-Cd 325 nm laser. According to the results, the optimal annealing conditions for the best photoluminescence (PL) characteristics were found to be oxygen fraction, ($O_2/O_2+Ar$) of 20%, RF power of 240W, substrate temperature of RT (room temperature), annealing condition of $600^{\circ}C$ for 20 min, and sputtering pressure of 20 mTorr. The obtained wavelength of light emission was found at 379 nm (ultraviolet-UV region). However, the optimal parameters for the best PL characteristics of ZnO thin films were not consistent with those obtained from the (002) intensities of XRD analyses. As a result, XRD pattern was not considered as the key issue concerning the intensity of PL of ZnO thin film. The intensity of the emitted UV light will correspond to the grain size of ZnO film.

• Journal of Ecology and Environment
• /
• 제42권4호
• /
• pp.205-210
• /
• 2018

To assess the environmental factors determining the zonation between Phacelurus latifolius and Phragmites australis, vegetation survey and soil analysis were performed at a tidal marsh. The vegetation of the tidal marsh was classified into P. latifolius and Suaeda japonica dominated quadrats, P. latifolius and P. australis dominated quadrats, P. australis dominated quadrats, and P. australis and other land plants dominated quadrats. The density of P. latifolius ($83.7{\pm}5.5\;shoots\;m^{-2}$) was higher than that of P. australis ($79.3{\pm}12.1\;shoots\;m^{-2}$) in each dominated quadrat but height of two species were similar. Soil environmental characteristics of P. latifolius dominated quadrats appeared to be affected by tide based on higher soil electric conductivity ($EC_{PL}=1530{\pm}152{\mu}Scm^{-1}$ ; $EC_{PA+PL}=689{\pm}578{\mu}Scm^{-1}$ ; $EC_{PA}=689{\pm}578{\mu}Scm^{-1$) and lower pH ($pH_{PL}=5.96{\pm}0.16$ ; $pH_{PA+PL}=6.28{\pm}0.31$ ; $pH_{PA}=6.38{\pm}0.22$). In redundancy analysis, environmental characteristics of P. latifolius dominated quadrats and P. australis dominated quadrats were clearly separated and those of P. latifolius and P. australis co-dominated quadrats were similar to P. australis dominated quadrats. From our investigation, P. latifolius showed relatively high competitiveness when compared to P. australis in lower tidal zone rather than upper tidal zone. Zonation of P. latifolius and P. australis seems to be a transitional zone between halophytes and land plant species.

• ETRI Journal
• /
• 제34권6호
• /
• pp.911-921
• /
• 2012

In high-speed wireless communications, an analysis of the propagation characteristics is an important process. Information on the propagation characteristics suitable for each environment significantly helps in the design of mobile communications. This paper presents the analysis results of radio propagation characteristics in outdoor environments for a new mobile wireless system at 781 MHz. To avoid the interference of Korean DTV broadcasting, we measure the channel characteristics in urban, suburban, and rural areas on Jeju Island, Republic of Korea, using a channel sounder and $4{\times}4$ antenna. The path loss (PL) measurement results differ from those of existing propagation models by more than 10 dB. To analyze the frequency characteristics for Korean propagation environments, we derive various propagation characteristic parameters: PL, delay spread, angular spread, and K-factor. Finally, we verify the validity of the measurement results by comparing them with the actual measurement results and 3D ray-tracing simulation results.

• 마이크로전자및패키징학회지
• /
• 제9권3호
• /
• pp.49-56
• /
• 2002

본 연구에서는 평탄형 (exact) GaAs 기판과 $2^{\circ}$, $6^{\circ}$, $10^{\circ}$ 경사형 (offcut) GaAs 기판 등 네 종류의 기판에 유기금속 기상성장장치를 이용하여 InGaP 에피막을 성장시켰고, 기판경사도에 따른 계면의 탄성특성이 InGaP 에피막의 전위밀도에 미치는 영향에 대하여 최초로 연구하였다. 탄성변형은 TXRD의 격자부정합과 격자 misfit등을 고려하여 산출되었고, 전위밀도는 에피막의 x-선 반치폭을 이용하여 계산되었다. 기판경사도가 $6^{\circ}$일 때 계면의 탄성특성이 가장 양호하였고, x-선 반치폭은 가장 낮았다. 11 K PL측정 결과, 기판경사도 증가에 따라 PL 발진파장은 감소하였고, 기판경사도가 $6^{\circ}$에서 PL 강도 역시 가장 높았다. 에피막의 TEM 관측 결과, 회절패턴은 전형적인 zincblende 구조를 보였고, 기판경사도 $6^{\circ}$에서 전위밀도가 가장 낮게 관측되어 TXRD 및 저온 PL측정 결과와 부합되었다. 본 연구의 결과와 소자제작 특성 및 빔특성을 종합적으로 고려해 볼 대, 광전소자용 InGaP/GaAs 이종접합구조에서 최적의 기판경사도는 $6^{\circ}$임을 밝혔다.

• Transactions on Electrical and Electronic Materials
• /
• 제12권3호
• /
• pp.102-105
• /
• 2011

This work describes the characteristics of zinc oxide (ZnO) thin films formed on a polycrystalline (poly) 3C-SiC buffer layer using a sol-gel process. The deposited ZnO films were characterized using X-ray diffraction, scanning electron microscopy, and photoluminescence (PL) spectra. ZnO thin films grown on the poly 3C-SiC buffer layer had a nanoparticle structure and porous film. The effects of post-annealing on ZnO film were also studied. The PL spectra at room temperature confirmed the crystal quality and optical properties of ZnO thin films formed on the 3C-SiC buffer layer were improved due to close lattice mismatch in the ZnO/3C-SiC interface.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.803-806
• /
• 2002

Flame spray pyrolysis was applied to improve the photoluminescence characteristics of blue-emitting $Sr_5(PO_4)_3Cl:Eu^{2+}$ phosphor particles with high brightness for the application to LED phosphor. $Sr_5(PO_4)_3Cl:Eu^{2+}$ prepared from conventional spray pyrolysis had poor PL intensity than that of commercial products under long-wavelength ultraviolet(UV). $Sr_5(PO_4)_3Cl:Eu^{2+}$ phosphor particles prepared by flame spray pyrolysis had PL intensity as same as that of commercial products under long-wavelength UV. Hollow morphology and porous structure of the particles prepared by the flame spray pyrolysis disappeared after posttreatment. Even though the $Sr_5(PO_4)_3Cl:Eu^{2+}$ phosphor particles prepared by the flame spray pyrolysis had irregular shape, the particles had dense structure and clear surface property.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.776-780
• /
• 2000

ZnGa$_2$O$_4$thin films were prepared on Si(100) wafer in terms of RF power, substrate temperatures and Ar/O$_2$flow rate by RF Magnetron Sputtering. Photoluminescence(PL) measurement was employed to observe the emission spectra of ZnGa$_2$O$_4$films. The influences of various deposition parameters on the properties of grown films were studied. The optimum substrate deposition temperature for luminous characteristics was about 50$0^{\circ}C$ in this investigation. PL spectrum of ZnGa$_2$O$_4$ thin films showed broad band luminescence spectrum.