• 한국해안해양공학회지
• /
• 제19권6호
• /
• pp.596-605
• /
• 2007

본 연구에서는 파랑이 존재하는 수역에서 수평방향으로 분사되는 비부력 원형 난류제트의 거동을 검토하기 위해 수리실험을 수행하였다. 난류제트의 유속은 PIV(particle image velocimetry)기법을 이용하여 측정하였으며, 측정된 순간유속장을 위상평균하여 평균유속장으로 계산하였다. 수리실험에서는 상대적으로 작은 파고의 규칙파가 사용되었으며, 파랑의 분산이 난류제트의 확산현상에 미치는 영향을 제트의 중심선유속과 횡단면유속의 변화를 통하여 관찰하였다. 또한 파랑의 위상변화에 따른 제트 거동을 파악하기 위하여 다른 세 위상순간에서 제트의 거동을 비교하였다. 제트의 중심선유속은 파고가 커짐에 따라 감소하였으며, 횡단면의 폭은 증가함을 알 수 있었다. 제트의 횡단면유속분포 특성인 자기상사성은 파고가 증가할수록 약해졌으나 축방향으로의 단면폭의 변화는 크지 않았다. 또한 파고에 대한 제트의 변화에 비해 파랑 위상에 대해서는 변화가 작음을 알 수 있었다.

• 한국해안해양공학회지
• /
• 제19권6호
• /
• pp.606-613
• /
• 2007

본 연구에서는 2차원 수리모형실험을 통해 직립 구조물에 의한 권파와 이로 인해 발생하는 처오름과 월파 유속장을 측정하고, 그 결과를 이용하여 월파의 속도분포를 위한 경험식을 구하였다. 구조물 주위에서의 쇄파에 의한 월파는 넓은 기포화된 지역을 형성하며 다위상 상태가 된다. 이와 같은 구조물 주위에서의 처오름과 월파흐름의 유속을 측정하기 위하여 PIV(particle image velocimetry)기법을 사용하였으며, 기포화된 흐름영역은 PIV기법의 변형된 기법을 고안하여 측정하였다. 두 기법을 이용하여 측정된 유속장으로부터 구조물 주위에서의 3가지의 주된 위상인 쇄파, 처오름 그리고 월파의 최고유속을 알 수 있었다. 또한, 구조물의 상부로 월파된 유체흐름의 최대유속분포는 비선형적인 단면을 보여주고 시간별 최대유속은 주로 유체의 전면부에서 일어남이 관측되었다. 차원해석을 통해 무차원화된 유속분포로 부터 구조물 상단에서의 월파유속 분포가 유사단면을 갖는다는 것을 확인하였으며, 이를 이용하여 월파의 유속분포를 위한 실험적 경험식을 제시하였다.

• Smart Structures and Systems
• /
• 제24권6호
• /
• pp.793-802
• /
• 2019

The centrifuge model test is usually used for two-dimensional deformation and instability study of the soil slopes. As a typical loose slope, the municipal solid waste (MSW) landfill is easy to slide with large deformation, under high water levels or large earthquakes. A series of centrifuge model tests of landfill slide induced by rising water level and earthquake were carried out. The particle image velocimetry (PIV), laser displacement transducer (LDT) and marker tracer (MT) methods were used to measure the deformation of the landfill under different centrifugal accelerations, water levels and earthquake magnitudes. The PIV method realized the observation of continuous deformation of the landfill model, and its results were consistent with those by LDT, which had higher precision than the MT method. The deformation of the landfill was mainly vertically downward and increased linearly with the rising centrifugal acceleration. When the water level rose, the horizontal deformation of the landfill developed gradually due to the seepage, and a global slide surface formed when the critical water level was reached. The seismic deformation of the landfill was mainly vertical at a low water level, but significant horizontal deformation occurred under a high water level. The results of the tests and analyses verified the applicability of PIV in the two-dimensional deformation measurement in the centrifuge model tests of the MSW landfill, and provide an important basis for revealing the instability mechanism of landfills under extreme hydraulic and seismic conditions.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.45-50
• /
• 2005

Characteristics of flows at T-junction duct with and without orifices are investigated in this paper. Experiments and PIV visualization were carried out for several flow rates. Two-dimensional PIV experimental apparatus was decided by numerical analysis. PIV visualization was also coded to visualize flow fields at junctions for two-dimensional case. For the PIV visualization system, Grey-Level Cross-Correlation particle tracking algorithm was used to calculate the flow fields. Vinyl chloride polymer particles of $100{\sim}150{\mu}m$ of diameter are used in this visualization. The PIV visualization results showed relatively good agreement with Experimental data.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2001년도 Proceedings of 2001 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.44-52
• /
• 2001

A micro-PIV(particle image velocimetry) measurement has been conducted to investigate flow fields in such microfluidic devices as microchannels and micronozzle. The present study employs a state-of-art micro-PIV system which consists of epi-fluorescence microscope, 620nm diameter fluorescent seed particles and an 8-bit megapixel CCD camera. Velocity vector fields with a resolution of $6.8\;\times\;6.8{\mu}m$ has been obtained, and the attention has been paid on the effect of varying measurement conditions of particle diameter and particle concentration on the resulting PIV results. In this study, the microfluidic elements were fabricated on plastic chips by means of MEMS processes and a subsequent molding process. Flow fields in a variety of microchannels as well as micronozzle have been investigated.

• 한국가시화정보학회지
• /
• 제4권2호
• /
• pp.59-68
• /
• 2006

We have evaluated the performances of the following six interpolation schemes used for win-dow deformation in particle image velocimetry (PIV): the linear, quadratic, B-spline, cubic, sinc, Lagrange interpolations. Artificially generated images comprised of particles of diameter in a range pixel were investigated. Three particle diameters were selected for detailed evaluation: pixel with a constant particle concentration $0.02particle/pixel^2$. Two flow patterns were considered: uniform and shear flows. The mean and random errors, and the computation times of the interpolation schemes were determined and compared.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.667-672
• /
• 2000

The Characteristics of the conical vortices on the roof surface of a low-rise building has been investigated by using a PIV(Particle Image Velocimerty) technique. The scaled model of TTU building with 1:92 scaling ratio was used. The Reynolds number based on the free stream velocity and the length of the model was $1.96{\times}10^5$. When the angle of attack for the building model is $45^{\circ}$, the conical vortices are occurred symmetrically and the center of vortices are changed with respect to the angle of the approaching flow. The rotating direction of the conical vortices found to be counter-rotating. The secondary vortex motions are investigated using the instantaneous flow field data.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2002년도 제18회 학술발표대회 논문초록집
• /
• pp.64-64
• /
• 2002

Two dimensional velocity distributions outside a Mach 2.0 supersonic nozzle have been investigated using digital particle image velocimetry (PIV). Mean velocities, turbulence intensities, vorticity field and volume dilatation field are obtained from 300 instantaneous PIV images using 0.33 $\mu\textrm{m}$ $TiO_2$ particle. The seeding particle of larger size, 1.4 $\mu\textrm{m}$ $TiO_2$, is also used for the experimental measurements of velocity lag downstream of shock waves according to particle sizes. The results have been compared and analyzed with schlieren photographs and computational fluid dynamics (CFD) results for the velocity distribution, the locations of shock waves and over-expanded shock structure. It was shown that the locations of normal shock and shock waves can be resolved by the axial or radial velocities, and the velocity lag is more significantly increased due to particle inertia as a particle size increases. And it was also found that over-expanded shock structures call be predicted by volume dilatation fields, and streamwise turbulence intensities are influenced significantly by normal shock waves.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.264-271
• /
• 1999

The present experimental study is aimed to investigate the flow characteristics of the high-speed flow field within hot-water pump by PIV(Particle Image Velocimetry). As multi-point simultaneous velocity acquisition, 2-D PIV system based upon the two-frame gray-level cross correlation method is adopted using PC frame-grabber and simple video system. Gated image intensifier CCD Camera to cope with illumination problem is arranged for accurate PIV measurement of high-speed complex flow. The velocity vector distribution, velocity profile, and kinetic energy are represented quantitatively at the full-scale region for the deeper understanding of the unsteady flow characteristics in a pump.

• 한국추진공학회지
• /
• 제18권1호
• /
• pp.1-7
• /
• 2014

본 연구에서는 유동의 속도비와 입자의 크기가 덕티드 로켓의 2차 연소기 내의 유동 혼합 특성에 미치는 영향을 고찰하였다. 연구의 실험적 기법으로는 PIV(Particle Image Velocimetry)가 적용되고 수치적 방법으로는 LES(Large Eddy Simulation)가 사용되었다. PIV 입자로는 직경 $5{\mu}m$와 $50{\mu}m$의 폴리스틸렌이 각각 사용되었고, 속도비는 각각 5, 3, 1.5로 수행되어졌다. 고속유로를 통한 유동이 저속유로의 유동과 혼합되어 재부착점과 재순환 영역을 형성하였고, 속도비가 작을수록 재순환 영역이 커졌다. 큰 입자를 적용한 경우가 증가된 모멘텀에 의해 재순환 영역이 크게 나타났고, 유동 특성에 대한 속도비의 영향은 작은 입자를 적용한 경우에 비해 크지 않게 나타났다.