• 한국광학회지
• /
• 제5권2호
• /
• pp.333-339
• /
• 1994

단일모드 광섬유를 부착한 고속 광통신용 PIN-전치증폭기 모듈을 GaInAs PIN 광검출기와 GaAs 전치증폭기를 하이브리드로 집적하여 제작하였다. PIN 광검출기의 정전용량은 0.35pF이었으며 이 소자의 수광직경은 $20{\mu}m$였다. 제작된 수광모듈의 -3dB 차단주파수는 2GHz 이상이었으며 2.5Gbps NRZ$(PRBS=2^{23}-1)$ 입력광신호에 대해 비트오율이 $10^{-9}$일 때 -25.2dBm의 수신감도를 보였다.

• 터널과지하공간
• /
• 제30권4호
• /
• pp.394-403
• /
• 2020

본 기술보고는 Pin-on-disk 마모시험에서 연속적인 등속도 아르키메데스 나선 경로 계산 방법에 관해 설명한다. 근사 계산된 등속도 아르키메데스 나선은 회전 중심 가까이에서 속도가 불안정하다. 따라서 본 기술보고에서는 등속도 조건을 만족시키기 위해 중공 단면을 가지는 시편을 사용하여 원점 부근에서 오프셋을 주었다. 또한, 내향형 나선과 외향형 나선을 연속적으로 연결하기 위해서 각각의 나선의 시작과 종료 지점 정보를 다음 차례의 나선에 반영하였다. 더불어, 시편의 치수과 마모시험 조건의 변화에 따라 등속도 나선 경로를 편리하게 계산하는 데 도움을 주고자 전용 계산 프로그램을 개발하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.807-810
• /
• 1995

The effects of weae particles on the friiction and wear behavior of metals in dry sliding conditions are presented. The tribological test were performed using pure metal specimens which were selected based on their degrees of compatibility and hardness ratio. Friction and wear experiments were conducted using both pin-on-disk and reciprocating pin-on-plate type tribotesters to investigate the effect of motion history. Experimental results show that in the case of dry sliding the frictional behavior observed during pin-on-disk test differed form that of pin-on-reciprocator test for the given set of material pairs. The friction coefficient and wear rate were found to be higher for the pin-on-disk tests. It is suspected that the sliding motion of the pin affects the wear particle dynamics, which in turn influences the frictional behavior. The effect of material pair properties seemed to be relatively smaller than that of wear particles. The results of this paper is expected to aid in the design of mechanical systems for best tribological performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.543-548
• /
• 1994

This is the paper on the development of assemnly automation and visual inspection system for smart card reader connector. The automation consists of 3 main process injection, assembly and inspection. During the injection, the main pin of a reel. transferred under uniform tension, is cut with an injection interval and positioned precisely to an injection mold by roll feeder after injection. The main base is stacked to a magazine for main pin's exact positionning to a mold . For last effective production, The turn table and pick & place are driver with gears and came by a single monter. We developed the small parts handling technigue for stable supply of micro ist pin and 2nd pin and could determine the orientation and position of those pins. For reliable inspection, We used the vision system which examins the guality of arranged pins with a CCD camera. The connector models which can be manufactured with this system are 8 pin and 10 pin type. The user can select the connector model for production and adjust the torerable error range during the inspection of arranged pins.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.170.1-170
• /
• 2001

This paper developed the model for electro hydraulic force control system by identification method via ARMAX model. Implementation of Identification is performed on Pin-On-Disk type tribotester. The wear mechanism is an important mechanic property to select a material´s life and a optimum work condition. Pin-on-disk type tribotester is popular wear analysis experimental equipment and its mechanism is that adding a force on a rotating disk to simplify two surface contact´s wear experimental condition. Material´s rotating velocity and eccentricity rotation makes disturbance and it affects adding constant force. To get a high performance of force adding part, DDV(Direct Drive Valve) which has pressure control loop is used. To obtain a tribotester´ s ARMAX model, prediction error method(PEM) is used in case force adding part and rotating part is ...

• 한국기계가공학회지
• /
• 제3권1호
• /
• pp.38-44
• /
• 2004

An internal finishing process by the application of magnetic abrasive machining has been developed as a new technology to obtain a fine inner surface of non-ferromagnetic pipe. In this paper, an abrasive slurry circulation system was designed and manufactured. As a result, it was found that a fine inner surface of pipe was available by the use of these machining methods. The basic machining characteristics of pin-type magnetic tools were analyzed experimentally. In addition, the experimental results show that pin-type magnetic tools have more machining efficiency than Iron particles as magnetic tools.

• 한국정밀공학회지
• /
• 제16권5호통권98호
• /
• pp.194-199
• /
• 1999

For the purpose of improving accuracy in friction and wear test, a hydraulic pin-on-disk type tribotester was developed and its performance was evaluated experimentally. The performance estimation of the tribotesrer was accomplished by comparing both the consistency of the applied normal load and the robustness of the control against the mechanical disturbances with those of the pneumatic and the dead weight loading method respectively. The developed hydraulic pin-on-disk type tribotester showed the better reliability in the performance and the hydraulic loading method provided the more accurate friction coefficient.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1483-1485
• /
• 2009

Silicon dioxide ($SiO_2$) thin films were deposited using a modified DBD called a "pin-to-plate-type DBD" in order to generate high-density plasmas with a gas mixture of PDMS/$O_2$. The effect of the gas mixture on the physical and chemical properties of $SiO_2$ deposited by the pin-to-plate-type DBD with the mixture of PDMS/$O_2$ was investigated.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.455-457
• /
• 2011

PIN type의 LED(${\lambda}=630nm$)와 photo TR을 이용하여 PPG 센서를 제작하였다. 이 때, LED의 광출력은 window 통과 후, 약 $240{\mu}W$이다. 그리고 인체에서 흡수 및 반사가 이루어진 후의 광파워는 더욱 작기 때문에 이를 보완하기 위해 photo TR을 LED 양측으로 배치하여 주변으로 반사하는 광을 측정하였다. 측정 된 신호는 filter와 OP amp.를 이용하여 1차 처리과정을 거치고, 알고리즘을 이용하여 2차 처리 하였다. 또한 알고리즘은 평상시를 포함하여 운동시에도 측정이 가능하도록 설계하였다.

• 한국생산제조학회지
• /
• 제23권4호
• /
• pp.345-349
• /
• 2014

In this study, an age-hardened 6061-T6 alloy sheet was used, which is commonly utilized for auto parts. The junction strength characteristics in relation to the stirring speed and welding speed were studied in accordance with the friction stir welding rotation of the tool pin. Micro hardness measurements of A type and B type pins, for a welding speed of 400 mm/min and a tool rotational speed 3000 rpm, were obtained as Hv104 and Hv111, respectively. For a welding speed of 200 mm/min and a tool rotational speed of 2000 rpm, we obtained Hv48 and Hv50 for A and B type pins, respectively. Microstructure observation showed that the stirring portion was fine and uniform, which occurred because of its plastic deformation. In the thermomechanically affected zone, partial recrystallization was present because of the plastic deformation. The crystal grains in the heat affected zone were coarsened due to the heat generated by friction stir welding.