• Journal of Advanced Marine Engineering and Technology
• /
• 제37권1호
• /
• pp.91-98
• /
• 2013

엔진 및 회전기기의 진동은 선체의 피로도를 증가시켜 내구성을 저하시키는 원인이 된다. 이를 방지하기 위하여 엔진 및 회전기기와 선체사이에는 댐퍼를 부착하여 진동을 최소화 하고 있다. 일반적으로 선박에 부착하는 댐퍼는 수동형 댐퍼로 중 고주파의 특정 진동영역에 대하여 제진 특성을 갖도록 설계되어있지만 저주파영역에서는 그 효과를 기대하기 힘들다. 이에 본 연구에서는 보다 광대역의 진동신호에 대해 높은 제진특성을 얻기 위하여 VCM을 이용한 능동형 제진 장치를 개발하였다. 제진장치를 제어하기 위해 라우스휴리츠 안정조건과 한계감도법을 이용하여 PID제어기를 구성하였고, 제어기 출력은 2상한과 4상한 초퍼회로를 이용하여 VCM을 구동할 수 있도록 하였다. 시뮬레이션과 실제 실험을 통하여 제어알고리즘과 제어장치의 유용성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1377-1379
• /
• 1996

In this paper, each parameter was identified by the gradient descent method to overcome difficulty deciding fuzzy rules of FLC for the unknown process and the type of membership Junctions. Usually PID or optimal control theories have been mostly usee in control field so far. However, optimal control requires much time for calculation because of adaptation for disturbance and nonlinearity. And intricate technique such as MRAS which can be realized only by an expert are limited to be used in the systems requiring rapid and precise response because of comparatively longer calculating time and complicateness. Gradient descent method is a method to find Z minimizing a function about a certain vector Z. And required output of FLC is gained using gradient approaching method in order to adapt control rule parameters of FLC. Simulation proved validation of this algorithm.

• 드라이브 ㆍ 컨트롤
• /
• 제12권4호
• /
• pp.60-70
• /
• 2015

A front-end loader (FEL) mounted on an agricultural tractor is one of the most commonly used implements for farm work. However, when the tractor carries material using the bucket attached to the FEL on a sloping ground, the materials can spill or roll back over the operator due to the tilted body, thereby requiring the bucket surface to remain level at a constant value regardless of varying slopes. In this study, an active system for controlling the angle of the FEL bucket on a tractor based on the real-time measurement of ground slopes was developed to enable the bucket to constantly remain level. A FEL simulator operated based on an electro hydraulic proportional valve (EHPV) was constructed in the laboratory to develop a proportional-integral-derivative (PID) controller forming a virtual electronic control unit (ECU) on the computer, which could automatically adjust the bucket angles depending on varying input angles while sending SAE-J1939 associated messages via CAN BUS to the EHPV. The different parameter values for the PID controller due to the gravity effect of the bucket were determined using a manual PID tuning method while assuming that the tractor travels on either an ascending slope or a descending slope. The developed PID control-based self-leveling system showed a mean of steady-state errors of within $1^{\circ}$ and a mean of delayed times of ~ 0.8s when the step input of $+20^{\circ}$ was given, implying that the developed system and control algorithm would be effective in maintaining the bucket angle at a certain value. Future studies include the improvement of the control algorithm to reduce such a time delay as well as the application of the developed algorithm to the FEL mounted on a tractor tested at a testing ground.

• 전기학회논문지
• /
• 제63권7호
• /
• pp.987-993
• /
• 2014

Pitching machines have been around for many years for casual amusement purpose or professional athletes' training usage, and so forth. The current pitching machines are usually built on the firm ground and do not have any mobility function. In this paper, we develop a pitching machine that has both ball-shooting and mobility functions. Our developed pitching machine consists of two parts. The upper body part has a function of shooting a ball using two DC motors and the lower body part has a function of mobility like mobile robots by using two wheels governed by DC motors. All these functions are operated wirelessly by Android smartphones via bluetooth. The control of each DC motor is done by ${\epsilon}$-PID control method in which the gain tuning is simplied by using a single parameter ${\epsilon}$. Simulation and actual experiment show that our developed pitching machine has both nontrivial shooting and mobility features.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.719-720
• /
• 2006

In the mechanical system, optimization of motion control is very essential in the aspect of automation technique progress. In the servo system, the function of controller is very important but most of the controllers have played only the role of pulse generator because the controller with main function is very expensive. In this thesis, the system was composed of PC, commonly used driver AC servo motor and a produced control board. The PC transmit a gain, a locus data to a driver and controller. At the same time, it converts imformation from the controller and convert them into data and offer an output with graph. The role of a controller is to trasmit a locus data to a driver and counting the pulse on the phase of an encoder to the PC. We have performed the experiment in order to confirm with variable PID parameter capable of the optimization of gain tuning with the counting of feedback control sensor signal with regard to the external interface into the system, such as torque. Based on the experiment result, we have confirmed as follows: First, it was confirmed that we could easily input control factors P.I Gain, constant $K_P,\;K_I$ into PC. Second, not only pulse generator function was possible, but with this pulse it was also possible to count using software with PIC chip. And third, using the multi-purpose PIC micro chip, simple operation and the formation of small size AC Servo Controller was possible.