• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.12
• /
• pp.25-34
• /
• 2006

In this paper, a method of designing the pitch control algorithm for the wind turbine generator system (WTGS) and results of nonlinear simulation are presented. For this, the WTGS is treated as a multibody system and the blade element and momentum theory are adopted to model the aerodynamic force and torque acting the rotor blades. For the purpose of controller design, the WTGS is approximated to 1 DOF system using the fact that the WTGS is eventually a constrained multibody system. Then a classical PID controller is designed and used to regulate the rotational speed of the generator. FORTRAN based nonlinear simulation program is written and used to evaluate the performance of the proposed controller at the various wind scenario and operational modes.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.636-642
• /
• 2015

This paper presents an application of heuristic harmony search (HS) optimization algorithm for the identification of linear continuous time-delay system from step response. Identification model is first-order plus dead time (FOPDT), which describes a linear monotonic process quite well in most chemical processes and HAVC process and is often sufficient for PID controller tuning. This recently developed HS algorithm is conceptualized using the musical process of searching for a perfect state of harmony. It uses a stochastic random search instead of a gradient search so that derivative information is unnecessary. The effectiveness of the identification method has been demonstrated through a number of simulation examples.

• Journal of agriculture & life science
• /
• v.44 no.4
• /
• pp.69-77
• /
• 2010

Fuzzy control is widely used for improving temperature control performance as controlling ventilation in greenhouse because the technique can respond more flexibly to the outside air temperature and wind speed. By pre-studied PID and normal fuzzy control this study was performed to obtain the fundamental data that can be established in better greenhouse ventilation control method. The temperature control error by the simple fuzzy control was $1.2^{\circ}C$. The accumulated operating size of the window and the number of operating were 84% and 13, respectively. These showed equivalent control performance with pre-studied result that control error. The accumulated operating size of the window and the number of operating were 75% and 12, respectively. The proposed fuzzy technique was simple control logic method compared with step and PID control methods, but it showed equivalent performance. Therefore, the proposed simple fuzzy control method could be used in micro controller of small programmable memory size and many applications.

• 전기의세계
• /
• v.46 no.3
• /
• pp.20-25
• /
• 1997

자율주행시스템은 복잡한 환경에서 효과적인 주행을 위해서 센서를 통해 주변의 정보를 수집하고 주변환경에 적절한 동작을 취해야 한다. 이러한 자율주행시스템에 지능적인 방법을 통하여 새롭게 제안한 방법을 서술하였다. 퍼지 논리를 이용하여 운전자와 같이 차량이 차선을 따라 주행하기 위한 퍼지 논리 제어기(FLC)가 설계되었다. 함축적인 차량모델을 기반으로 설계한 퍼지 논리 제어기가 복잡하고 정확한 차량모델을 기반으로 설계된 PID나 FSLQ 제어기와 동등한 성능을 발휘하였다. 인간의 운전방법을 학습할 수 있는 신경회로망을 이용하여 자율주행시스템에 적용하였다. 퍼지 신경회로망은 인간의 제어특성을 반영하도록 설계되었으며 자동으로 생성된 제어기는 퍼지 논리 제어나 신경회로망의 기법보다 우수한 성능을 발휘하였다. 퍼지 논리, 신경회로망, 유전자 알고리즘 등의 인간의 지능 모델에 기초를 둔 방법을 자율주행차량의 제어에 도입하므로써 기존의 자율주행시스템의 문제점을 극복하는데 주요한 역할을 하였다. 앞으로 퍼지 논리, 신경회로망, 유전자 알고리즘은 각각의 강점을 융합하거나, 고전적인 제어 알고리즘과 결합하므로써 더욱 우수한 성능을 발휘할 것으로 예상된다.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2684-2686
• /
• 2005

This paper presents design of nonlinear controller based on genetic-fuzzy algorithm. Motor system that is included at a humanoid robot has many nonlinear parameters such as saturation, backlash and so on. So, it is hard to control a humanoid robot because of these nonlinearities. Also, tracking following ability is also reduced by these nonlinearities. In this paper, fuzzy PID controller is proposed for reducing efficiency by saturation. At that time, genetic algorithm is supplied at making fuzzy rule in order to make optimal fuzzy PID controller. Also, disturbance observer is used to reduce the efficiency of backlash. All these processes are verified by simulation and experiment in the real humanoid robot.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.1
• /
• pp.80-88
• /
• 2002

As many sensors and actuators are used in automated systems, various industrial networks are adopted for digital control system. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network delays. This paper presents the implementation scheme of a networked control system via Profibus-DP network. More specifically, the effect of the network delay on the control performance was evaluated on a Profibus-DP testbed, and a GA-based PID tuning algorithm is proposed to design controllers suitable for networked control systems.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.11
• /
• pp.937-943
• /
• 2016

Vertical velocity is critical in many areas, such as the control of unmanned aerial vehicles, fall detection, and virtual reality. Conventionally, the integration of GPS (Global Positioning System) with an IMU (Inertial Measurement Unit) was popular for the estimation of vertical components. However, GPS cannot work well indoors and, more importantly, has low accuracy in the vertical direction. In order to overcome these issues, IMU-barometer integration has been suggested instead of IMU-GPS integration. This paper proposes a new complementary filter for the estimation of vertical velocity based on IMU-barometer integration. The proposed complementary filter is designed to minimize drift error in the estimated velocity by adding PID control in addition to a zero velocity update technique.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.39-40
• /
• 2008

본 논문은 네트워크 기반 제어시스템(NCS: Networked Control Systems)모델매칭 제어기법을 적용한 효율적인 제어알고리즘을 제안한다. 비선형의 특징을 가지는 제어기 및 관측기의 시간지연을 Pade 근사법으로 선형화하여 선형시스템 이론을 적용한 모델매칭 제어기를 설계하였다. 또한, 제어기의 차수를 줄이기 위하여 저차시스템으로 근사화하여 그 타당성을 검증하였다. 제안한 제어알고리즘의 타당성 및 신뢰성을 검증하기 위하여 컴퓨터 시뮬레이션을 실시하였으며 기존의 PID 제어기법과 비교분석하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.598-601
• /
• 2001

As many sensors and actuators are used in many automated system, various industrial networks are adopted for digital control system. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network delays. This paper presents the implementation scheme of a networked control system via Profibus-DP network. More specifically, the effect of the network delay on the control performance was evaluated on a Profibus-DP testbed, and a GA based PID tuning algorithm is proposed to demonstrate the fesibility of the networked control system.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.2
• /
• pp.46-56
• /
• 1999

A predictive controller is designed based upon stochastic methods for compensation time-delay effect on a system which has inherent time-delay caused by the spatial separation between controllers and actuators. The predictive controller estimates current outputs through linear prediction methods and probability functions utilizing previous outputs, and minimizes the malicious phenomena caused by the time-delay in precision control systems. To demonstrate effectiveness of this control methodology, we applied this algorithm for the control of a tele-operated DC servomotor. The experimental results show that this predictive controller is superior to the PID controller in terms of convergence-characteristics, and show that this controller expands the maximum allowable time-delay for a system maintaining the stability. Since the proposed predictor does not require models of plants - it requires only stochastic information for outputs --, it is a general scheme which can be applied for the control of systems which are difficult to model or the compensator of PID control.