• 전기의세계
• /
• v.20 no.1
• /
• pp.19-23
• /
• 1971

In testing the moving balance of a rotor instead of strobotron system here to for in use, making the pick up touch the rotor without putting the subject on the testing table, we can observe both the corrected original point and its unbalance point which appeared on the Braun tube screen with naked eyes. Then we can do our correcting job with rapidity.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.2
• /
• pp.24-29
• /
• 2020

In South Korea, agricultural mechanization has been carried out in paddy field, but not in the upland field during recent decades. Among crops such as root vegetables, leafy vegetables from upland field, corn is used as forage for livestock as well as food for men. The corn harvester needs to be developed to replace men's labor in rural area to follow the recent needs in the farm industry. The corn harvester is comprised of three parts such as cutting part, feeding part and pick-up part. The feeding part is so long for cut corns to be delivered from the cutting part to the pick-up part. Structurally, the load from the long moment arm is likely to be big. Thus, the setup to measure the stress on the duct of the feeding part was configured with the data acquisition system. The strain gages were attached on several points that seem to be loaded a lot comparatively. The stress was measured and the measured stresses were divided by the yield stress to get the safety factor. And then, we made sure the safety factors were above 1 on the all points. In conclusion, the feeding part of the corn harvester which convey the cut corn from the cutting part from the pick-up part can be regarded to be made safe structurally.

• Journal of Embryo Transfer
• /
• v.13 no.1
• /
• pp.77-86
• /
• 1998

A combined technology of transvaginal ovum pick-up(OPU) system with in vitro-oocyte manipulation technique can be used for improving reproductive efficiency in the cattle. The objective of this study was to establish a newly-conceived breeding program using OPU in the pregnant cows. The OPU trial was performed in pregnant cows every 10 days from 40 through 90 days of artificial insemination (Al), and number of follicles in ovary, number of retrieved oocytes and embryo development following in vitro-fertilization, were evaluated. Reduced number of follicles in the ovaries of pregnant cows was firstly detected from 70 days after A' and a significant (P<0.05) decrease in the follicle number (5.4 follicles /donor) was found at 90 days than at 40, 50, 60 and 80 days after Al (8.0~9.2). A similar pattern was also observed in the number of oocytes retrieved by OPU apparatus during experimental period. When retrieved oocytes were matured and inseminated in vitro with frozen bull semen, development of the oocytes to the blastocyst stage was not significantly affected by the retrieval time. Four embryos (morula or blastocyst stage) derived from oocytes retrieved from pregnant cows were nonsurgically transferred to four recipient cows on day 7 of estrus cycle. For the first time in Korea, three of four transferred embryos developed to live calves with normal physiological parameters. In conclusion, an effective breeding program employing pregnant cow can be developed by use of OPU trial and in vitro culture techniques of oocytes ; OPU system could be repeated in pregnant cows with no risk of abortion and viable offsprings were borne after transfer to the recipients.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.5
• /
• pp.622-632
• /
• 2005

Statement of problem: Silicone Index Tooth Tray impression system which does not use gingicord has a shortcoming. It takes time to remove internal wall of Silicone Index Tooth Tray for space of wash impression material. Purpose: This study was to evaluate whether providing certain space to impression body can prevent from doing complicated laboratory work. Material and methods: After mounting metal dies with shoulder and chamfer margins arbiturarily, SITT was produced using $Blu-mousse^(R)$. In one experimental group, wash impression was taken using $Fit-tester^(R)$ without removing interior surface of SITT and in the other group, wash impression was taken using $Fit-tester^(R)$ providing 0.5mm space in the SITT and then compared the differences in two groups. Results: 1. There was no significant difference between a group which did not allow space and a group which granted equal 0.5mm space. 2. There was no significant difference between gingival diameter, occlusal diameter of metal die that has shoulder margin and gingival diameter, occlusal diameter of metal die that has chamfer margin. 3. There was no significant difference between a group which did not take pick-up impression and a group which took pick-up impression through relining method using SITT 4. There was no significant difference between a group that poured immediately after taking primary impression and a group that poured after removing poured stone die. Conclusions: When taking an impression of an abutment using SITT impression system, it is considered to obtain clinically identical results between a group that did not grant a 0.5mm space within SITT for wash impression and a group which invest a space. Furthermore, it is considered possible to produce an individual die through secondary pouring.

• The Journal of Korea Robotics Society
• /
• v.18 no.1
• /
• pp.29-36
• /
• 2023

This paper shows a design of a gripper with an adjustable working area to depalletize a delivery cardboard box of various sizes. The gripper should pick the box with only one flat surface to lift the boxes stacked close to each other. The lift force of the gripper is the vacuum suction force. To handle boxes of various sizes, the gripper adjusts the working area. The gripper operates four vacuum generators independently. The simultaneous rotation on different axes of four gripper-arms with suction cups moves the position of suction force. The six operation modes of the gripper are divided into the size of the working area. The operation mode is determined according to the size of the top side of the box. Experiments are conducted by lifting the box of various sizes. The gripper can pick the box of various sizes without vacuum leaks from unused cups. Also, the experiments verify the improvement of stability of the box by adjusting the working area of the gripper. The gripper can lift the box without deformation of the box by adjusting the working area.

• Journal of Embryo Transfer
• /
• v.29 no.1
• /
• pp.35-41
• /
• 2014

Laparoscopic ovum pick-up (LOPU) is a convenient method for collecting oocytes in small ruminants. LOPU has the advantage of being a less invasive means of oocyte collection, thereby allowing for a repeated usage of the oocyte donor animals. A total of 25 Korean black goats were used in the winter season (December to February) and LOPU was applied to the goats which had been treated for superovulation more than two times during the last twelve months. Estrus was synchronized with an intravaginal insert containing 0.3 g progesterone for 10 to 12 days. Ovaries were hyperstimulated with eCG 1,000 IU oneshot, FSH with eCG (50 mg / 1,000 IU; 70 mg / 500 IU; 70 mg / 1,000 IU) oneshot or FSH multiple-shot with eCG oneshot ($20mg{\times}6/300IU$) given intramuscularly 72 h prior to LOPU. For these groups, the number of follicles (mean ${\pm}$ SEM) observed which developed to larger than 2 mm in diameter were $1.6{\pm}2.5$, $4.3{\pm}3.1$, $5.5{\pm}4.2$, $6.6{\pm}2.1$ and $8.8{\pm}7.8$, respectively. Oocytes were aspirated by using OPU needles and a vacuum pump. The overall oocyte retrieval rates were 41.4%. Oocytes were matured in TCM-199 supplemented with 10% (w/v) bovine serum albumin + $10{\mu}g/ml$ FSH + $1{\mu}g/ml$ $17{\beta}$-estradiol for 27 h at $39^{\circ}C$ in 5% $CO_2$ in air. Oocytes were parthenogenetically activated by ionomycin combined with 6-diethylaminopurine (6-DMAP). Total oocyte maturation and cleavage rate were 67.3% and 78.8%, respectively. In summary, LOPU is a useful oocyte collection method in Korean black goats that can provide immature oocytes for transgenesis or nuclear transfer.

• BMB Reports
• /
• v.48 no.9
• /
• pp.513-518
• /
• 2015

Factors that modulate cholesterol levels have major impacts on cardiovascular disease. Niemann-Pick C1-like 1 (NPC1L1) functions as a sterol transporter mediating intestinal cholesterol absorption and counter-balancing hepatobiliary cholesterol excretion. The liver receptor homolog 1 (LRH-1) had been shown to regulate genes involved in hepatic lipid metabolism and reverse cholesterol transport. To study whether human NPC1L1 gene is regulated transcriptionally by LRH-1, we have analyzed evolutionary conserved regions (ECRs) in HepG2 cells. One ECR was found to be responsive to the LRH-1. Through deletion studies, LRH-1 response element was identified and the binding of LRH-1 was demonstrated by EMSA and ChIP assays. When SREBP2, one of several transcription factors which had been shown to regulate NPC1L1 gene, was co-expressed with LRH-1, synergistic transcriptional activation resulted. In conclusion, we have identified LRH-1 response elements in NPC1L1 gene and propose that LRH-1 and SREBP may play important roles in regulating NPC1L1 gene. [BMB Reports 2015; 48(9): 513-518]

• Weed & Turfgrass Science
• /
• v.4 no.1
• /
• pp.49-57
• /
• 2015

This research was initiated to analyze the periods of spring green-up and winter leaf discoloration of three ornamental grasses which have potential to be widely used with seed propagation. Two native grasses of Arundinella (Arundinella hirta var. ciliata Koidz), fountaingrass (Pennisetum alopecuroides (L.) Spreng), and switchgrass (Panicum virgatum L.) was tested. Spring green-up were evaluated after one year growth from seed propagation on April 1, 2009. Arundinella started with quick pick of spring green-up during $13^{th}$ to $20^{th}$ of May. Fountaingrass and switchgrass showed relatively slow picks of green-up during $20^{th}$ to $27^{th}$ of May. However, winter leaf discoloration started on swtichgrass and fountaingrass but Arundinella terminated relatively slowly. Swtichgrass showed the pick discoloration during $8^{th}$ to $15^{th}$ of October from the bottom to top parts of the plant. Fountaingrass showed the pick winter discoloration started from bottom to top parts during the $22^{nd}$ to $29^{th}$ of October. However, Arundinella showed relatively slow discoloration from upper to bottom parts during October $29^{th}$ to November $5^{th}$. Arundinella showed a relatively higher ornamental value with 125 days of the complete green period compared than fountaingrass and swtichgrass which maintained approximately 105 days of green period.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.1
• /
• pp.26-34
• /
• 2010

Effects of drying condition (IR radiation) on the optical properties and the printability of coated paper were elucidated at various latex sizes and low and high coating color concentrations. It was found that the smaller latex provided better rheology and higher dry and wet pick strength than the larger one. The high solids coating resulted in higher paper gloss and smaller roughness than the low solids coating, even though the clay addition was reduced by 20 parts in the high solids coating. Increasing IR radiation prohibited binder migration into the base paper. Thus it improved binder distribution and decreased pores in the coated layer, resulting in the increased dry and wet pick strength and the improved printing gloss. On the other hand, the color trapping and ink set-off was impaired with increasing IR radiation. Print mottle index passed through a maximum with increasing IR radiation.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.348-352
• /
• 2005

본 논문은 조선소에서 계획기간동안 각 플랜트의 생산일정에 따른 블록의 모든 수송요구량이 미리 알려져 있는 정적인(static) 수송환경을 고려한 트랜스포터 일정계획문제를 다룬다. 조선소 내에서 블록들의 수송은 몇 가지 특성을 가진다. 500톤을 초과하는 거대 블록들은 2대 이상이 결합된 새로운 형태의 트랜스포터를 이용하여 운반된다. 운반이 요구되는 블록들 중 일부는 계획기간동안 규정된 출발요구시각에 pick-up되기를 요구하는 반면 나머지 블록들은 계획기간동안 규정된 도착요구시각 전에 delivery되기를 요구한다. 이러한 트랜스포터의 결합 및 시간 제약은 문제를 더욱 복잡하게 하는 요인이 된다. 본 논문에서는 계획기간 내에 모든 블록운반 요구사항들(출발지와 도착지, pick-up과 delivery 시각, 톤수, 결선 등)을 만족시키는 트랜스포터 일정계획문제를 다룬다. 트랜스포터 일정계획문제에서 중요한 주제는 총 로지스틱스 시간 (공차운행시간, delay 시간 및 tardy 시간)을 최소화하기 위해 계획기간 내에 최소의 트랜스포터 운영대수로 각 트랜스포터에 어떤 블록을 할당하고 어떤 순서로 운반할 것인 지를 결정하는 것이다. 이에 본 논문에서는 주어진 트랜스포터 일정계획문제를 해결하기 위해, 1단계에서 최소비용 네트워크 흐름문제를 근간으로 트랜스포터의 최소사용대수를 구하고 이를 기초로 2단계에서 각 트랜스포터에의 블록 할당과 운반순서를 결정하는 2단계 휴리스틱 알고리즘을 제안한다.