• 한국산업융합학회 논문집
• /
• 제18권1호
• /
• pp.1-9
• /
• 2015

This research dealt with a two-degree-of-freedom controller which was used for 2-dimensional force generator based on an linear motor. The gain margin of the controller may be reduced when the time constant is near to the sampling time of a discrete controller. In case of low gain controller, it cannot satisfy the control performance. A two-degree-of-freedom controller based on PI-control was proposed. It can manage performance and stability respectively. It also had a kind of a feed-forward control. This scheme can not only lessen gain of conventional PI controller in order to stability but also obtain high tracking performance.

• 전력전자학회논문지
• /
• 제22권1호
• /
• pp.60-66
• /
• 2017

This paper presents the design of a proportional-integral (PI)-proportional-derivative (PD) position controller without using a speed controller in motor drive systems. Unlike the existing PI-PD position controller design methods, the proposed controller is designed by reducing the entire position control system to a second-order transfer function. Thus, the gain values for the PI-PD position controller can be determined easily by a given bandwidth of the position controller. The PI-PD position controller designed by the proposed method is adopted for position control in an interior permanent magnet synchronous motor drive system to confirm the validity of the proposed design method. The effectiveness of the proposed design method is confirmed through experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.7-10
• /
• 1998

Because of simple control algorithm and easy implementation, the conventional PI controller has been widely used in industrial application. But, it is very difficult to find the optimal PI control gain. Therefore, in improperly tuned PI controller or parameter variation, to obtain optimal performance, the novel PI controller, which consist of conventional PI controller and 4-rule based fuzzy logic, are presented in this paper. The novel PI controller which exhibits a stabilizing effects on the closed-loop system, has good robustness regarding the improperly tuned PI controller or parameter variation. The simulations are performed to verify the capability of proposed control method on induction motor.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.211-214
• /
• 2000

The conventional PI controller has been widely used in industrial application due to the simple control algorithm. But it is very difficult to find the optimal PI control gain. Therefore in this paper to obtain optimal performance fuzzy proportional-plus-integral controller for the vector control system of an induction machine is presented. The simulation model is created in MATLAB/SIMULINK. The simulation results demonstrate the good performance of this system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.91-93
• /
• 2007

This paper presents multi-PI controller of IPMSM drive using fuzzy and neural-network. In general, PI controller in computer numerically controlled machine process fixed gain. To increase the robustness, fred gain PI controller, Multi-PI controller proposes a new method based fuzzy and neural-network. Multi-PI controller is developed to minimize overshoot and settling time following sudden parameter changes such as speed, load torque, inertia, rotor resistance and self inductance. The results on a speed controller of IPMSM are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.573-577
• /
• 2009

초음속제트 엔진의 동적거동 모사를 수행하고 흡입구에서의 버즈 마진 확보와 추력 제어를 위한 PI 제어 알고리즘을 연구하였다. 먼저 연료유량 제어를 통해 요구추력을 추종하고 노즐 목 면적 제어를 통해 흡입구에서의 버즈마진이 항상 양의 수를 갖도록 흡입구 출구 압력을 조절하였다. 비행 마하 수, 고도, 받음각 변화에 따라 추력제어와 버즈 마진 제어를 위한 비례 게인과 적분 게인을 각각 구하고 시뮬레이션 하였다. 그 결과 비행 마하 수 2.1에서 3.0, 받음각 $0^{\circ}$에서 $10^{\circ}$ 사이의 운용영역에서 제어목표를 만족함을 확인하였다.

• 조명전기설비학회논문지
• /
• 제26권12호
• /
• pp.9-20
• /
• 2012

This paper proposes the efficiency optimization control of interior permanent magnet synchronous motor(IPMSM) drive using series connected-fuzzy neural network PI(SC-FNPI) controller. The PI controller is generally used to control IPMSM drive in industrial field. However, the PI controller has problem which is falling control performance about parameter variation such as command speed, load torque and inertia due to fixed gain of PI controller. Therefore, to improve performance of PI controller, this paper proposes SC-FNPI controller adjusted input of PI controller by FNN controller according to operating conditions. Also, this paper proposes efficiency optimization control which is improving efficiency with minimize loss. The SC-FNPI controller proposed in this paper is compared control performance with conventional FNN and PI controller about command speed, load torque and inertia variation. And the efficiency optimization control is compared with $i_d=0$ control about loss and efficiency. The SC-FNPI controller proposed in this paper shows more excellent control performance for rising time, overshoot and steady-state error. Also efficiency optimization control is increased efficiency by reducing loss.

• 한국항공운항학회지
• /
• 제26권3호
• /
• pp.48-54
• /
• 2018

This paper deals with a development of a quad-rotor for a hovering attitude control. First, a rotational dynamics are derived to design an attitude controller. The attitude controller is based on PI (Proportional-Integral) controller. For a stable attitude control, an anti-windup method applies to the PI attitude controller. Additionally, a complementary filter is used to obtain more reliable attitude. Gain values of the attitude controllers based on the anti-windup method are obtained through tests. Finally, the quad-rotor with the anti-windup based PI attitude controller is developed and a hovering attitude control flight tests are performed. As a result, the developed quad-rotor is capable of stable hovering.

• 조명전기설비학회논문지
• /
• 제23권2호
• /
• pp.103-107
• /
• 2009

PI제어기는 발전기의 전압제어 시스템에 널리 쓰이고 있다. 하지만 발전 시스템의 특성이 연속적으로 변화할 때, 새로운 PI매개변수를 결정하는 것이 쉽지 않다. 이를 해결하기 위하여 본 논문에서는 발전기의 전압제어에 신경망자율 적응 제어를 이용하는 제어 방법을 제안하였다. 전압제어 시스템의 적절한 연속적인 궤환 제어 이득은 델타학습 규칙에 의해서 결정된다. 제안된 제어 방법의 기능은 직류 발전기 전압제어 실험에 의해 확인하였다.

• 조명전기설비학회논문지
• /
• 제20권7호
• /
• pp.65-73
• /
• 2006

본 논문은 신경회로망을 이용한 IPMSM 드라이브의 속도제어를 제시한다. 일반적으로 수치 제어된 기계에서 PI 제어기는 고정된 이득값으로 처리한다. PI 제어기의 고정된 이득값은 어떤 동작조건에서는 양호하게 수행된다. 고정된 이득값을 가진 PI 제어기의 강인성 향상을 위하여 신경회로망을 기초로 하는 새로운 제어 방법인 NNPI 제어기를 제시한다. NNPI 제어기는 속도, 부하토크 및 관성과 같은 파리미터 변동에 대하여 오버슈트를 감소시키고 상승 시간 및 정상상태에 빠르게 도달한다. 또한 본 논문에서는 신경회로망을 사용하여 IPMSM의 속도를 제어하고 ANN 제어기를 사용하여 속도를 추정한다. 신경회로망의 역전파 알고리즘 방법은 전동기의 속도를 실시간으로 추정하는데 사용된다. IPMSM의 속도제어기 결과는 제시된 이득값 조절의 타당성을 입증한다. 그리고 NNPI 제어기는 광범위한 동작상태와 부하 외란에 대하여 고정된 이득값보다 우수한 성능을 가진다.