• Nuclear Engineering and Technology
• /
• 제23권4호
• /
• pp.444-455
• /
• 1991

본 연구에서는 CANDU-PHWR 형 기존 및 개량 핵연료의 원통형 (soild) 및 환상형 소결체에 대하여, 그 핵연료 전 수명 기간동안, 반경방향 출력분포를 정확하고 신속하게 계산하는 NEDAR 모형을 개발하였다. 본 계산모형에는 핵연료소결체의 직경 범위 8.0-19.5 mm, 농축도 범위 0.71-6.0 wt % U-235이고, 계산 가능 연소도범위가 0-840 Mwh/kgU (35000MWD/T)인 한계내에서, 핵연료 반경방향 출력분포결자식 및 열중성자속감소 계산결과자료가 포함되어 있다. CAN-DU-PHWR 형 원자로 중성자속 스펙트럼을 입력자료로 하여, 로물리 전산코드, CE-HAMMER 를 이용하여 핵연료의 각 설계조건 및 소결체의 환별 국부지점에 대하여, 임의로 설정한 기준 연소시점에서 반경 방향 출력 분포를 계산하였다. 이 계산 결과를 토대로 각 환의 평균출력을 구하는 적분법 및 비선형 곡선희귀계산법에 의하여, Bessel 함수와 지수함수의 다항식으로 구성된 반경방향 출력분포 기본 결과식 및 그 계수들이 산출되었다. 본 연구에서 개발된 NEDAR 모형을 이용하여 산출한 반경방향출력분포값을, 핵연료소결체 표면에서의 값을 기본단위로 환산하여 비교하면, 본 의형에 의한 반경방향 출력분포 결과가 기존 ELESIM 전산코드의 결과에 비교하여 약간 높게 나타났다. 소결체의 반경방향의 출력 및 온도분포는 핵분열기체생성물방출과 밀접한 관계가 있으므로, 본 모형을 기존 ELESIM 전산코트의 반경방향 출력분포 계산 모형과 대체한 전산코트, 즉 KAFEPA-NEDAR에 의한 핵분열기체생 생성물방출량 예측치를 기존 ELESIM 전산코드의 예측치와 비교하였다. 여기서 KAFEPA-NEDAR리 예측치가 실험결과 자료에 보다 더 가깝게 접근하였다. 따라서, 본 연구에서 개 발된 NEDAR모형은 과대한 계산시간의 낭비없이 CANDU-PHWR 형 핵연료소결체의 반경방향출력분포를 효율적이고, 신속/정착하게 계산하는 모형임이 입증되었다.

• Nuclear Engineering and Technology
• /
• 제11권4호
• /
• pp.263-274
• /
• 1979

국내도입이 예상되는 900MWe급 가압경수로형 (PWR) 원자력 발전소와 캐나다형가압중수로형 (PHWR-CANDU) 원자력발전소에 대하여 throwaway 핵연료주기를 가상하여 두 노형의 상대적인 경제성을 비교 검토 하였다. 계산을 목적으로 발전단가를 발전소 투자비, 운전보수비, 운전자본비 및 핵연료비로 구분했으며 건설단가는 보완된 ORCOST 전산코드를 그리고 발전단가는 보완된 POWERCO-50 전산코드를 사용하여 구하였다. 계산에 요구되는 각종의 경제인자에 대하여는 단일의 수치값을 갖는 상수보다는 어떤 범위의 수치대를 이루는 통계적인 변수로 처리하였으며 ORCOST 및 POWERCO-50을 통한 무작위 추출법을 통하여 발전소 건설비 및 발전단가의 화율돗수 분포도를 얻었다. 계산결과 두노형간의 발전단가 분포도는 서로 겹치고 있으며 발전 단가의 기대치는 1986년도 미화로 PHWR의 발전단가가 PWR의 발전단가, 39.41mills/kwh보다 약 0.4mill/kwh만큼 적지만 PHWR의 건설기간이 PWR 보다 1년정도 더 걸리게되는 경우 차이가 없음을 알았다. 따라서 두 노형간의 경제성은 거의 우열을 가릴 수 없으며 한국에서 원자력발전소 노형을 선정할 때 기술전수, 국산화 등 경제외적 인자도 경제적 인자로 수량화하여 검토하는 것이 필요하다고 결론을 내렸다.

• Nuclear Engineering and Technology
• /
• 제47권1호
• /
• pp.66-73
• /
• 2015

Background: A numerical simulation was carried out to investigate the difference between internal and external heat-flux distributions at the reactor vessel wall under in-vessel retention through external reactor vessel cooling (IVR-ERVC). Methods: Total loss of feed water, station blackout, and large break loss of coolant accidents were selected as the severe accident scenarios, and a transient analysis using the element-birth-and-death technique was conducted to reflect the vessel erosion (vessel wall thickness change) effect. Results: It was found that the maximum heat flux at the focusing region was decreased at least 10% when considering the two-dimensional heat conduction at the reactor vessel wall. Conclusion: The results show that a higher thermal margin for the IVR-ERVC strategy can be achieved in the focusing region. In addition, sensitivity studies revealed that the heat flux and reactor vessel thickness are dominantly affected by the molten corium pool formation according to the accident scenario.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1525-1531
• /
• 2019

The indigenous nuclear power program of India is based mainly on a series of Pressurised Heavy Water Reactors (PHWRs). A burst correlation for Indian PHWR fuel claddings has been developed and empirical burst parameters are determined. The burst correlation is developed from data available in literature for single-rod transient burst tests performed on Indian PHWR claddings in inert environment. The heating rate and internal overpressure were in the range of 7 K/s-73 K/s and 3 bar-80 bar, respectively, during the burst tests. A burst criterion for inert environment, which assumes that deformation is controlled by steady state creep, has been developed using the empirical burst parameters. The burst criterion has been validated with experimental data reported in literature and the prediction of burst parameters is in a fairly good agreement with the experimental data. The burst criterion model reveals that increasing the heating rate increases the burst temperature. However, at higher heating rates, burst strain is decreased considerably and an early rupture of the claddings without undergoing considerable ballooning is observed. It is also found that the degree of anisotropy has significant influence on the burst temperature and burst strain. With increasing degree of anisotropy, the burst temperature for claddings increases but there is a decrease in the burst strain. The effect of anisotropy in the ${\alpha}$-phase is carried over to ${\alpha}+{\beta}$-phase and its effect on the burst strain in the ${\alpha}+{\beta}$-phase too can be observed.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1892-1900
• /
• 2023

A protective oxide layer forms on the material surfaces of a Nuclear Power Plant during operation due to high temperature. These oxides can host radionuclides, the activated corrosion products of fission products, resulting in decommissioning workers' exposure. These deposited oxides are iron oxides such as Fe₃O₄, Fe₂O₃ and mixed ferrites such as nickel ferrites, chromium ferrites, and cobalt ferrites. Developing a new chemical decontamination technology for domestic CANDU-type reactors is challenging due to variations in oxide compositions from different structural materials in a Pressurized Water Reactor (PWR) system. The Korea Atomic Energy Research Institute (KAERI) has already developed a chemical decontamination process for PWRs called 'HyBRID' (Hydrazine-Based Reductive metal Ion Decontamination) that does not use organic acids or organic chelating agents at all. As the first step to developing a new chemical decontamination technology for the Pressurized Heavy Water Reactor (PHWR) system, we investigated magnetite dissolution behaviors in various HyBRID inorganic acidic solutions to assess their applicability to the PHWR reactor system, which forms a thicker oxide film.

• Nuclear Engineering and Technology
• /
• 제47권1호
• /
• pp.33-46
• /
• 2015

During the past 10 years, the Korea Atomic Energy Research Institute (KAERI) has performed a study to control hydrogen gas in the containment of the nuclear power plants. Before the Fukushima accident, analytical activities for gas distribution analysis in experiments and plants were primarily conducted using a multidimensional code: the GASFLOW. After the Fukushima accident, the COM3D code, which can simulate a multidimensional hydrogen explosion, was introduced in 2013 to complete the multidimensional hydrogen analysis system. The code validation efforts of the multidimensional codes of the GASFLOW and the COM3D have continued to increase confidence in the use of codes using several international experimental data. The OpenFOAM has been preliminarily evaluated for APR1400 containment, based on experience from coded validation and the analysis of hydrogen distribution and explosion using the multidimensional codes, the GASFLOW and the COM3D. Hydrogen safety in nuclear power has become a much more important issue after the Fukushima event in which hydrogen explosions occurred. The KAERI is preparing a large-scale test that can be used to validate the performance of domestic passive autocatalytic recombiners (PARs) and can provide data for the validation of the severe accident code being developed in Korea.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1192-1197
• /
• 2003

The aim of this study is to investigate the hydride embrittlement when the LBB evaluation is carried out for the integrity of PHWR Pressure Tubes. The transverse tensile and CCT tests were performed at three hydrogen concentrations while the test temperatures were changed (RT to $300^{\circ}C$). The specimens were directly machined from the pressure tube retaining original curvature. Both the transverse tensile and the fracture toughness tests showed the hydrogen embrittlement clearly at RT but this phenomenon was disappeared while the test temperature arrived over $250^{\circ}C$. Using the DHC test results, the CCL and LBB time were calculated and compared. The hydride embrittlement behavior at the LBB evaluation was definitely showed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.338-344
• /
• 2003

The seismic analysis method of spent fuel storage structures for PHWR plant is introduced in comparison with the method for PWR plant. Investigating the structural characteristics of the storage structures, the former is vertically stacked fuel storage trays, while the latter is welded honeycomb type structure. However, as both structures are submerged and free standing, the analysis methods to anticipate the seismic response of both structures are complicated. For the better estimation of actual seismic response, how to model the dynamic properties and the structural behaviour is the key issue. In this paper, the overall procedures of the seismic modelling and stability check for seismic sliding and overturning of the two different storage structures are discussed in the viewpoint of analysis reliability

• 대한기계학회논문집A
• /
• 제28권5호
• /
• pp.610-616
• /
• 2004

The aim of this study was to investigate the hydride embrittlement when the LBB evaluation was carried out for the integrity of PHWR Pressure Tubes. The transverse tensile and CCT toughness tests were performed at three hydrogen concentrations while the test temperatures were changed (RT to 30$0^{\circ}C$). Both the transverse tensile and the fracture toughness tests showed the hydrogen embitterment clearly at RT but this phenomenon was disappeared while the test temperature arrived at 25$0^{\circ}C$. Using the DHC test results, the CCL and LBB time were calculated and compared. The hydride embrittlement at the LBB evaluation made the LBB time short definedly. If the operating temperature, DHCV and LBB deterministic parameters such as A and m were known, LBB time could be estimated without the calculation of CCL.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1319-1322
• /
• 2004

In this paper, a fault diagnosis system for ram in PHWR plant is developed. The developed diagnosis system can detect the ram stuck phenomena due to increased ball wear and damage in ball nut using discrete wavelet transform before the ram is stuck. The validity of developed diagnosis system is shown via experiments using ball nut characteristic test equipment.