• Transactions on Electrical and Electronic Materials
• /
• 제1권4호
• /
• pp.25-29
• /
• 2000

In this paper, PET(Ployethylene Terephthalate) films with semiconducting and interface layers were investigated, The electrical properties, such as volume resistivity, tan$\delta$(dissipation factor) and breakdown strength at various temperatures were measured. Thermal analysis of PET and semiconducting films were measured and compared by differential scanning calorimeter(DSC) of each film. It is found that the volume resistivity of films(dependence on semiconducting interface layers)and electrical properties of PET films are changed ,Breakdown strength and dissipation factor of PET films with semiconducting layer (PET/S/PET) are decreased more greatly than PET and PET/PET films, due to the increase of charge density of charges at two contacted interfaces between PET and semiconductor, The dissipation factor of each films in increased with temperature,. For PET/S/PET film, is depended on temperature more than PET of PET/PET. However, the breakdown strength is increased up to 85$\^{C}$ and then decreased over 100$\^{C}$The electrical properties of PET films with semiconducting/interface layer are worse than without it It is due to a result of temperature dependency, which deeply affects thermal resistance property of PET film more than semiconducting/interface layers.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권5호
• /
• pp.281-284
• /
• 1999

In this paper, the electrical conduction, breakdown strength and dielectric properties were investigated in the interfaces of PET films. The volume resistivity and breakdown strength were decreased; especially the specimens with semiconductive layer showed the lowest breakdown strength. This decrease of electrical properties was appeared by increasing charge density in inhomogeneous layer of PET. The dielectric properties of PET did not show significant difference with PET/PET but the films with semiconductive interface layer showed the increase in capacitance and $tan\delta$ was affected by the PET rather than semiconductive layer. It is assumed that the variation of $tan\delta$ was affected by the dielectric polarization and the leakage current(charge).

• 폴리머
• /
• 제26권3호
• /
• pp.335-343
• /
• 2002

블렌드 (PET/PETG 70/30 블렌드) 수지는 폴리에틸렌테레프탈레이트 (PET)와 폴리에틸렌테레프탈레이트 글리콜 (PETG)을 무게 비 70/30으로 혼합하여, 이축 압출기를 사용하여 제조하였다. 미연신 필름은 이 블렌드와 순수 PETG 수지를 압축성형기로 각각 용융 압축시켜 제조하였고 연신 필름은 미연신 필름을 모세관 레오메타를 사용하여 연신시켜 제조하였다. 제조된 블렌드 연신 필름과 PETG 연신 필름의 결정성, 수축율, 열적, 동역학적 및 기계적 특성을 X-선 회절분석기, 오븐기, DSC, 및 인장시험기를 사용하여 조사하였다. 블렌드와 PETG필름의 결정화도와 밀도는 연신비와 연신 속도의 증가와 더불어 증가하였으나 반면 연신 온도 증가와 더불어 감소하였다 또한 블렌드 필름의 결정화도와 밀도는 PETG 필름보다 높게 나타났다. 두 필름의 인장강도와 인장탄성률은 연신비 및 연신 속도 증가와 더불어 증가하였고 연신온도 증가에 따라 감소하였다. 또한 블렌드 필름의 인장강도와 인장탄성률이 PETG 필름 보다 높게 나타났다. 두 필름의 수축율은 연신비와 연신 속도가 증가할수록 감소하였고 미연신 블렌드 필름의 수축율이 순수 PET 필름보다 600% 증가함을 보였다.

• 한국염색가공학회지
• /
• 제2권4호
• /
• pp.223-230
• /
• 1990

This study was carried out with the view of fundamental investigating to improve the tactile and the hygroscopicity of Poly (ethylene terephthalate) (PET) fibers. Mono-sodium ethylene glycolate in ethylene glycol (MSEG-EG) solution was prepared and PET films were treated with it. The following conclusions were obtained. 1. The tensile strength decreased with increasing decomposition ratio while density, crystallinity and crystallite size increased with increasing decomposition ratio when PET films were treated with MSEG-EG solution. 2. Number of carboxyl end groups was increased until 10-20% decomposition ratio when PET films were treated with MSEG-EG solution. However, the decomposition ratio became more than 20%, the number of carboxyl end groups had tendency to decreased. 3. The surface tension of PET films increased for treating with MSEC-EG solution. Hydrogen bonding force and poler force among the components of surface tension increased while dispersion force among those decreased. 4. The moisture region of PET films increased with increasing decomposition ratio when PET films were treated with MSEG-EG solution.

• 한국염색가공학회지
• /
• 제15권1호
• /
• pp.39-47
• /
• 2003

Phosphorescent PET/liquid color films and phosphorescent PET/disperse dyes films were prepared by melt casting method using Hot press. Then, weight ratios and exhaustion percent of films were 0.7, 1.2, 1.5, 2.0, and 2.3 wt.%. The effects of L/C and D/D contents(wt.%) of films on the thermal properties, crystal structure, H(%), brightness$(mcd/mm^2)$, morphology, and tensile properties were investigated by means of DSC and WAXD, etc. It was found that the melting temperature and crystalline diffraction peaks were not changes with increasing the liquid color contents and disperse dyes exhaustion. Also, in case of using liquid color to phosphorescent PET film, the H(%) and brightness$(mcd/mm^2)$ value were superior to phos.PET/disperse dyes film. The tensile strength and the tensile modulus were decreased with increasing the contents of liquid color and exhaustion of disperse dyes in the phosphorescent PET film. Also, the elongation at break was increased with increasing the contents of liquid color and exhaustion of disperse dyes in the phosphorescent PET film.

• 한국전기전자재료학회논문지
• /
• 제14권5호
• /
• pp.391-396
• /
• 2001

The purpose of this study is to investigate the effect of hole or crack on the Insulation characteristics of a PET films for EHV(Extra High Voltage) VT winding. The hole or the crack in the PET films was made and the insulation characteristics of them were measured. Ad an experimental result, it was shown hat he PDIV(Partial Discharge Inception Voltage) and the BDV(Breakdown Voltage) of the PET films with hole or crack were lower than those without them, and were markedly dependent on their position and temperature. Therefore, the hole and the crack affected to insulation characteristics of PET films for SF$_{6}$EHV(Extra High Voltage) VT Winding.g.

• 한국염색가공학회지
• /
• 제8권3호
• /
• pp.16-23
• /
• 1996

In order to know the change of weight loss, crystallinity, crystallite size(010) plane, and thermal properties of PET films which had before drawn and annealed at various temperature. It were treated in sodium triethylene glycolate-triethylene glycol(STEG-TEG) were prepared. The following results were abtain. The weight loss of PET films were increasing with increaing treated time in STEG-TEG solution and It showed a linear rlationship to the treated time. The crystallinity and crystallite size(010) plane of PET films decreased with increasing decomposition ratio when PET films were treated with before annealed under 16$0^{\circ}C$. The crystalline region on the surface of samples were decompose to thermal unstable crystalline structure

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권1호
• /
• pp.1-4
• /
• 2004

This paper presents an investigation of the phase-resolved partial discharge (PD) pattern of PET (Poly Ethylene Telephthalate) films with carbon black particles. The phase-resolved PD pattern and statistical parameter from PET samples according to the number of included semiconductor particles were measured. The measurement system consisted of a conventional PD detector using a digital signal processing technique. The partial discharge patterns of the PET films that include the semiconductor particles were investigated to simulate an actual situation that may exist in the cable. In addition, difference of PD patterns between semiconducting particles in PET films and artificial voids was studied. The relationship between the numbers of semiconductor particles in PET films was discussed through the difference of Ψ-q-n distribution and statistical analysis.

• 한국포장학회지
• /
• 제23권1호
• /
• pp.9-15
• /
• 2017

수증기 및 산소에 대한 차단성이 개선된 PVA-BA 코팅 조성액의 포장소재로의 적용가능성을 확인하기 위하여 콤마 코팅과 라미네이션 공정을 이용하여 PET/PVA-BA/OPP 다층필름을 제조하였다. PCT 전 후의 PET/PVA-BA/OPP 다층필름의 기체, 수증기 차단특성 및 인장강도를 확인하였고 이를 PA/PA/EVOH/PP 다층필름의 물성과 비교하였다. PVA내 BA 함량이 증가함에 따라 물성이 증가하는 것을 확인할 수 있었지만, PCT 후 PET/PVA-BA/OPP 다층필름의 산소, 수증기 차단특성 및 인장강도는 감소하는 경향을 보였다. 이는 PVA-BA층 내 증가한 가교밀도와 관련이 있는 것으로 판단된다. 또한, 조미김을 이용한 저장특성분석에서, PET/PVA-BA/OPP다층필름은 PP/Al-metallized PP 다층필름에 비해 조미김의 지방산화를 야기시키는 요인을 효과적으로 억제하는 것으로 판단된다. 하지만, PP/Al-metallized PP 다층필름에 비해 PET/PVA-BA/OPP 다층필름의 상대적으로 높은 수분투과특성 때문에 Aw에 큰 장점을 확인하지 못하였다. 따라서, 물성 극대화 및 포장소재로 적용을 위해서는 PET/PVA-BA/OPP 다층필름 내 수분 차단성 향상에 대한 추가적인 연구가 필요하다는 것을 확인하였다.

• 한국표면공학회지
• /
• 제32권6호
• /
• pp.671-676
• /
• 1999

ITO (indium tin oxide) thin films on PET (polyethylene terephthalate) substrate have been deposited by a dc reactive magnetron sputtering without heat treatments such as substrate heater and post heat treatment. Each sputtering parameter during the sputtering deposition is an important factor for the high quality of ITO thin films deposited on polymeric substrate. Particularly, the material, electrical and optical properties of as-deposited ITO oxide films are dominated by the ratio of oxygen partial pressure. As the experimental results, the excellent ITO films are prepared on PET substrate at the operating conditions as follows : operating pressure of 5 mTorr, target-substrate distance of 45mm, do power of 20~30W, and oxygen gas ratio of 10%. The optical transmittance is above 80% at 550 nm, and the sheet resistance and resistivity of films are 24 Ω/square and $1.5\times$10$^{-3}$ Ωcm, respectively.