• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2007.11a
• /
• pp.43-44
• /
• 2007

• Textile Coloration and Finishing
• /
• v.16 no.1
• /
• pp.59-64
• /
• 2004

As a simulation of solvent-assisted dyeing, the solvent effects on the structure of polyethylene terephthalate(PET) film treated by dimethylformamide(DMF) were investigated. The effects were evaluated by the atomic force microscopy(AFM) topographical changes and FT-IR spectrum analysis. PET films treated with DMF at $70^{\circ}C$ for several different treatment time(20, 40, and 60 min). AFM topography showed that, with increasing treatment time by DMF, PET surfaces became smooth due to the swelling phenomenon and the rigid structure changed into flexible state which was contributed to increase the surface area of PET films. FT-IR spectrum analysis showed that DMF and molecular chains of PET interacted each other via their polar carbonyl groups and that DMF also affected the out-of-plane bending vibration mode of phenyl ring of PET.

• Fashion & Textile Research Journal
• /
• v.5 no.5
• /
• pp.545-549
• /
• 2003

Dyeing properties such as migration of disperse dye and color fastness of 4 types of the carrier[Carrier-I(methyl napthalene). Carrier-II(chloro benzene). Carrier-III(aromatic ether) and Carrier-IV(o-phenyl phenol)] were evaluated for the study. For the results, the optimum dyeing time and concentration of the carrier was 30min at $110^{\circ}C$ and 2g/l, respectively. The redyeing ratio of the fabric samples treated with Carrier-II and III was higher than that treated with Carrier-I and IV, thus, if was conclude that the redyeing ratio of the samples treated with Carrier-II and III was excellent. The light fastness of the samples treated with Carrier-III and IV was higher than that of Carrier-I and II in order of 2-4 grades. However, there were little changes in terms of washing and sublimation and rubbing fastness for the samples.

• Textile Coloration and Finishing
• /
• v.21 no.4
• /
• pp.11-22
• /
• 2009

This study surveys the optimum processing conditions of ATY for PET braiding for automotive hoses. For this purpose, high tenacity and low shrinkable PET filaments with three types of deniers are prepared. Twenty seven ATY specimens are manufactured with variation of feed speed and overfeed on the air jet texturing machine. The physical properties of various yam according to the ATY processing conditions are measured and analysed for deciding the optimum ATY processing condition. Two kinds of ATY filaments made under the optimum air texturing conditions are processed with variation of tpm, heat setting temperature and heat setting time on the 2-for-l twister and setting chamber, respectively. The optimum twisting and heat setting conditions are decided through analysis of the yam physical properties. Finally, the braiding fabric specimens are manufactured using conventional filament and newly developed filament made under optimum twisting and heat setting conditions. The bursting strengths of these braiding specimens are compared and discussed between two types of specimens.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.117-117
• /
• 2012

Dyeing and fastness properties of 800nm sea-Island type PET nanofilament fabrics have been investigated. The dye uptake of nanofilament commended at lower temperatures and showed faster rate of dye uptake. The build up and wet fastness propertied of disperse dye on nanofilament were relatively poor since the more dye was needed to achieve a given depth of shade due to the large surface area.

• Textile Coloration and Finishing
• /
• v.33 no.1
• /
• pp.10-23
• /
• 2021

In order to synthesize the dye suitable for supercritical carbon dioxide(ScCO2) dyeing, a series of azo based disperse dyes were prepared using various aniline derivatives as diazo components and indol derivatives as coupling components. Dyeing process in ScCO2 of the synthesized dyes was performed on PET fiber at 120℃ for 2 hrs under 250bar pressure with 0.5% o.w.f. of dye concentration. The absorption maxima varied from 400 to 580nm depending on the substituted groups in aniline derivatives and the indol derivatives. The dyes showed high molar extinction coefficients(ε) of 27,000~61,000M-1cm-1. Dyed PET fiber exhibited excellent brightness and good light, washing and perspiration(acid/alkali) fastness properties.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.129-131
• /
• 2008

본 연구는 고 세탁견뢰도를 가지는 신규 Phthalimed계 염료를 합성하고, 일반 PET 섬유 및 해도형 PET에 염색하여 염색거동과 견뢰도 특성에 대해 알아보았다. 대부분의 염료는 4급 이상의 세탁견뢰도를 가지며, 몇 가지 염료는 90%이상의 염착률을 가진다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.145-146
• /
• 2008

This is studies about light and thin PET fabric having downproof properties using low denier filament yarn. We study how the manufacturing fabric effect on downproof properties according to conditions of low denier yarn, fabricataion, and dyeing and finishing.

• Science of Emotion and Sensibility
• /
• v.17 no.1
• /
• pp.93-104
• /
• 2014

This paper investigates the physical properties such as water absorption, drying and hygral expansion of moisture responded transformable fibers and their knitted fabrics including dyeing characteristics according to the different dyeing time and temperature. For this purpose, three kinds of covered filament yarn specimens using HEF and spandex as core and PET, aerocool as a covering filament were prepared. The knitted fabric specimens were made using three kinds yarn specimens and dyed with different dyeing temperature and time. The moisture absorption, drying and hygral expansion of three kinds of knitted fabric specimens were measured and discussed with yarn structure. The wearing performance of these knitted fabric specimens were also measured and discussed with yarn characteristics using FAST system. Finally, the dyeing characteristics such as dye affinity, color difference and color fastness to washing of these knitted fabric specimens were measured and discussed with different dyeing temperature and time for examining dyeing process performance of these moisture responded transformable knitted fabrics.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.91-91
• /
• 2011

폴리프로필렌(PP)은 고결정성 범용수지로서 염색성, 내열성, 촉감 등의 문제로 의류용 소재로는 부적합하여 초기에는 카펫용 섬유로서 가염형 폴리프로필렌 섬유가 상업화 되었지만 성공하지는 못하였다. 그 후, 섬유 산업도 의류용 외의 산업자재, 생활 자재 분야 등이 성장함에 따라, 폴리프로필렌 섬유의 수요가 확대되었다. 최근들어 스포츠 액티브 의류가 일반의류 트렌드로 들어오면서 기능성 섬유가 요구되고 이 분위기에 맞춰 다시 한번 폴리프로필렌 섬유의 의류화가 요구되는 시점이 되었으며 섬유중 에너지 소비량이 가장 적고, 쉽게 재용해할 수 있으며 소각시 유해 가스발생량이 매우 적은 특징등이 있기 때문에 지구 환경보호의 입장에서 폴리프로필렌 섬유가 재검토되고 있다. 이번 실험은 분산염료를 이용하여 농도별, 온도별, 시간별, 후처리시 시간과 온도의 변화로 가염 PP/PET 섬유의 염색특성을 알아보기 위해 실험 진행하였다. 실험에 사용되는 시약은 1급으로, $CH_3COOH$, NaOH, $Na_2S_2O_4$이며, 조제는 분산제, 정련제를 사용하였다. 먼저 온도별 실험에서 $40^{\circ}C$에서 승온하여 각각 $100^{\circ}C$, $110^{\circ}C$, $120^{\circ}C$, $130^{\circ}C$에서 온도에 따라 염색되는 정도를 알아보았다. 가장 높은 흡진을 보이는 온도에서 각각 40min, 50min, 60min, 70min 염색 유지시간 실험을 하여 염색이 안정되는 시간을 측정하였다. 위의 실험 결과 최적의 조건으로 염색농도에 따른 Build up 실험을 진행하였다. 가염 PP/PET 섬유는 일반 Polyester처럼 $120{\sim}130^{\circ}C$에서 가장 높은 염색농도 값(K/S)을 보인다. 또한 $130^{\circ}C$에서의 유지시간에서는 50 min 이상 진행시 더 이상의 흡진이 없거나, 염료의 탈락이 있음을 알수 있다. Build up 실험에서는 8.0%까지 실험하였지만, 결과는 그 이상농도를 사용하여도 염색은 가능함을 알 수 있었다. 후처리에 대한 실험에서 염료에 따라 차이가 있지만 크게 영향을 받지 않는 것으로 보이며, 제품성 평가 결과를 보면 후처리를 했을 경우 견뢰도가 우수한 것을 알 수 있었다.