• Textile Coloration and Finishing
• /
• v.31 no.3
• /
• pp.135-146
• /
• 2019

A series of azo based disperse dyes were synthesized and applied to polyester(PET) fiber in supercritical carbon dioxide($ScCO_2$). Various aniline derivatives were used as diazo component and coupled with glycine ethylester or carbonic acid ethylester derivatives to give azo based disperse dyes. Depending on the various diazo substituents, absorption maxima varied from 415 to 529nm in acetone. Dyeing in $ScCO_2$ was carried out at $120^{\circ}C$ and 250bar pressure for 2hrs with 0.5% o.w.f. of dye concentration. Dyed PET fiber had excellent brightness and good light, washing and perspiration(acid/alkali) fastness properties.

• Textile Coloration and Finishing
• /
• v.9 no.5
• /
• pp.42-51
• /
• 1997

The purpose of this article is to investigate the effect of $O_{2}$ low temperature plasma treatment oft chitosan treatment of polyester fabrics. Moisture regain, static charge, crease resistance and reduction ratio of the treated fabric were measured. The results of this study were as follows: The add-on ratio and. the moisture regain of polyester fabrics treated with chitosan after treated by plasma(CP PET) were higher than those of polyester fabrics treated with only chitosan(C PET). The static charge of polyester fabrics decreased greatly with increasing the concentration of chitosan. A durability for laundering of CP PET was higher than those of C PET. The crease resistance of polyester fabrics decreased with ihcreasing the concentration of chitosan continuously. CP PET had higher decreasing rate and better durability than C PET. It showed that chitosan-treated polyester fabrics had over 90% reduction ratio after 10 times of laundering, and CP PET had better reduction ratio than C PET.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.23-24
• /
• 2008

본 연구는 고 세탁견뢰도 특성을 가진 Phthalimed계 염료를 합성하고, 일반 PET 섬유 및 해도형 PET에 염색하여 염색거동과 견뢰도 특성에 대해 알아보았다. 대부분의 염료는 5급 이상의 세탁견뢰도를 가지며, 몇가지 염료는 70%이상의 염착률을 가진다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.55-57
• /
• 2008

본 연구에서는 신규원사인 Rayonmimetics(RMM) 섬유를 상품화 된 분산염료를 가지고 염색하여 PET 섬유와 비교하였다. RMM 섬유의 염착률은 기존 PET 섬유와 비슷하였으나, critical adsorption range는 10$^{\circ}C$ 정도 낮았다. Colorimetric properties를 비교해 보면, a${\ast}$값과 b${\ast}$값에서 color에 따른 경향성을 보이며, PET 섬유와 대비하여 duller 해졌다. 견뢰도는 PET 섬유와 비슷한 견뢰도를 보였다.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.391-396
• /
• 2001

The physical properties and the dyeability of the easily dyeable polyester yarn(EDY) were investigated and compared with those of regular polyester (REG-PET). The EDY, copolymerized with small amount of polyethylene glycol(PEG), showed higher intensity of aliphatic CH peak in IR spectrum, lower density and lower compactness than those of the REG-PET from the analysis of IR, density gradient column and XRD respectively. In the physical properties, the EDY has lowers $T_g$, $T_m$, specific stress and initial modulus, and also has higher strain than that of the REG-PET The EDY can be dyed under atmospheric pressure and its dyeing Fate was faster than REG-PET due to low $T_d$, and this seems to be caused by the increased flexibility of Polymer chain in amorphous region of the EDY due to the copolymerization of PEG.

• Polymer(Korea)
• /
• v.33 no.2
• /
• pp.175-182
• /
• 2009

Waterborne polyurethanes (WPUs) based on isophorone diisocyanate and mixed polyols of poly(tetramethylene glycol) (PTMG)/polycarbonate diol (PCD) were synthesized. The variation of mechanical and dyeing properties and alkali resistance of the WPU films were analyzed according to the polycarbonate (PC) content. The tensile strength of the films increased and the elongation at break decreased with the PC content in the WPU film. The incorporation of PC component in the WPU film did not affect the alkaline hydrolysis behavior. The synthesized WPU solutions were used as impregnating resins for the production of PET artificial leathers. The prepared WPU resins showed the good color fastness to washing, rubbing, and light of the artificial leather fabrics. The improvement of the properties became greater with the PC content in the WPU resin.

• Textile Coloration and Finishing
• /
• v.19 no.3
• /
• pp.12-17
• /
• 2007

In this study, we have investigated properties and behaviors of the indigo vat dyeings on synthetic fibers, namely PET and PTT/Spandex. In addition, indigo vat dyeing conditions such as dyeing temperature, dye concentration and pH were optimized. The finding results show that higher color strengths of indigo dyeings on the two types of applied fibers were obtained at $110^{\circ}C$ and $90^{\circ}C$, respectively. Furthermore, acid leuco dyeings on the fiber substrates using acetic acid and formic acid show higher dye uptake with compared to alkali leuco counterparts.

• Textile Coloration and Finishing
• /
• v.12 no.1
• /
• pp.52-60
• /
• 2000

In the prior studies, we reported that the dye uptakes of C. I. Disperse Violet 1 on polyester fiber in hexane and cyclohexane were higher than those in the other solvents, as the number of carbon atoms of alkanes decreased, the dye uptake increased, and the logarithmic plot of the dye uptakes vs. the solubilities of the dye showed that the dye uptakes are inversely proportional to the solubilities. In this study, for Interpretation of dyeing behavior of C. I. Disperse Violet 1 on polyester in alkanes, the thremodynamic parameters of dyeing, such as standard affnity, heat of dyeing(enthalpy change), entropy change, diffusion coefficient, and activation energy of diffusion, were obtained from isotherms and dyeing rates at different temperature. As the number of carbon atoms of alkanes increased, the standard affinity decreased, but the heat of dyeing(enthalpy change) and the entropy change showed larger negative values. These results mean that as the number of carbon atoms of alkanes increases, the dye uptake decreases, but both the fraction of the dye molecules dyed at relatively highly aligned or compact region of polyester fiber and the regularity of dye aggregates in the fiber become increased. As the number of carbon atoms of alkanes increased, the diffusion coefficient decreased, but the activation energy of diffusion increased. In the alkane of larger number of carbon atoms, because the solubility of the dye is higher, the desorption rate of the dye is faster and the diffusion coefficient is smaller than those in the smaller alkanes. But the energy required to separate the dye molecules from the alkane molecules is much higher because the interaction between the alkane molecule and the dye molecule become strong with the number of carbon atoms.

• Textile Coloration and Finishing
• /
• v.25 no.1
• /
• pp.65-69
• /
• 2013

PET fabrics of various luster, fiber thickness(denier), and weaving structure were dyed at the same conditions and determined their grey scale by using naked eyes, computer color matching (CCM) system, and real industry color (RIC) device to evaluate the effectiveness of RIC device developed in this study. As for the luster of fabrics, bright PET showed more differences when compared with semi-dull and full-dull. PET in both naked eyes and RIC device since the RIC device provide the real image of fabrics to observers. As for the fiber thickness, the results of naked eyes and RIC device were very similar while the result of CCM showed lower color grade. Finally, as for the weaving structures of PET fabrics, all the test results by naked eyes, CCM, and RIC device showed almost same grey scales. In these regards, the RIC device developed in this study was comparable to naked eyes by providing the real image of fabrics, however it was difficult to compare the very bright colors such as yellow and fiber thickness(denier) and weaving structure of fabrics.

• Journal of Fashion Business
• /
• v.9 no.3
• /
• pp.99-113
• /
• 2005

Recently, problems related to the natural dyeing have been addressed. Severer problems have been posed by the elution at metallic ions and dyestuff tram dyed fabrics. In order to prevent the elution tram the dyed fabrics, it is needed to improve the fastness. Especially, it is the most important measure to improve the fastness to perspiration in terms at human body safety. In this study, we employed chitosan pretreatment method bet ore the dyeing process, anticipating that the pretreatment might improve the fastness. We used Al, Sn, and Cu as mordants and investigated the fastness to light and perspiration of the chitosan treated and dyed fabric specimens. By the chitosan pretreatment, the fastness to perspiration improved, while the fastness to light did not.