• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.284-285
• /
• 2006

We prepared ITO thin films using Facing Targets Sputtering(FTS) method with various input currents at room temperature on Polycarbonate(PC) and Polyethersulfon(PES) substrates. As a function of sputtering conditions, electrical and optical properties of prepared ITO thin films were measured. The electrical, optical, structural characteristics of ITO thin films were evaluated by Hall Effect Measurement(EGK), X-Ray Diffractormeter(Rigaku) and UV-VIS spectrometer(HP) respectively. From the results, we obtained ITO thin films that have a resistivity of $4{\times}10^{-4}[{\Omega}-cm]$ on PC and $527{\times}10^{-4}[{\Omega}-cm]$ on PES. Also, the optical transmittances of all samples were over 80%.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.69-70
• /
• 2006

The ITO thin films were prepared by Facing Targets Sputtering(FTS) method on polyethersulfon(PES) substrate. The ITO thin films were deposited with the film thickness of 100nm at room temperature and working gas pressure of 1 mTorr. As a function of sputtering conditions, electrical and optical properties of prepared ITO thin films were evaluated by Hall Effect Measurement(EGK) and UV-VIS spectrometer(HP), respectively. From the results, the ITO thin films was deposited was with a resistivity $8.3{\times}10^{-4}[{\Omega}-cm]$ and transmittance over 80% in the visible range.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.403-404
• /
• 2007

We prepared the Al doped ZnO (AZO) thin film on polyethersulfon (PES) without any substrate heating by Facing Targets Sputtering (FTS) system. ZnO doped the content of Al 2 wt% was used and the sputtering conditions were gas pressure 1mTorr and input power 100W. The electrical, structural and optical properties of AZO thin films were investigated. To investigate the as-deposited thin film properties, we employed four-point probe, UV/VIS spectrometer, X-ray diffractometer (XRD), scanning electron microscopy (SEM), Hall Effect measurement system and Atomic Force Microscope (AFM).

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1443-1444
• /
• 2011

플렉시블 OLED 소자에서 주요한 역할을 하는 기판은 디스플레이의 성능, 신뢰성과 가격을 결정한다. 플렉시블 OLED소자의 기판으로는 PET, PC, PES, PEN과 같은 고분자 계열의 기판이 많이 사용되고 있지만 거칠기 등의 문제가 있는 것으로 알려져 있다. 본 논문에서는 셀룰로오스 종이를 사용하는 투명 플렉시블 OLED 소자를 개발하였다. 본 논문에서는 개발한 셀룰로오스 종이의 표면 거칠기는 $3.1{\AA}$이었으며, 투과도는 97.6%로서 PET기판 보다 우수한 특성을 보여주었다. 셀룰로오스 종이를 기판위에 양극으로 Ni을 이용하는 녹색 발광 플렉시블 OLED소자를 구현하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.12
• /
• pp.1134-1139
• /
• 2006

Electrical, optical, and structural properties of indium zinc oxide (IZO) anode films grown by a RF magnetron sputtering were investigated as functions of RF power and working pressure in pure Ar ambient. To investigate electrical, optical and structural properties of IZO anode films, 4-point probe and UV/VIS spectrometry, and X-ray diffraction (XRD) were performed, respectively. A sheet resistance of $15.2{\Omega}/{\square}$, average transmittance above 80 % in visible range, expecially above 85 % in 550 nm, and root mean square roughness of 1.13 nm were obtained from optimized IZO anode films grown in oxygen free ambient. All samples show amorphous structure regardless of RF power and working pressure due to low substrate temperature. In addition, XPS depth profile obtained from IZO/PES exhibits that there is no obvious evidence of interfacial reaction between IZO and PES substrate. Furthermore, current-voltage-luminance of the flexible phosphorescent flexible OLEDs fabricated on IZO anode shows dependence on sheet resistance of the IZO anode. These results indicate that the IZO anode is a promising candidate to substitute conventional ITO anode for high-quality flexible displays.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.442-443
• /
• 2006

Electrical, optical, surface, and structural properties of amorphous indium zinc oxide (IZO) films grown on $SiO_2$/PES/$SiO_2$ substrate by a RF sputtering in pure Ar ambient at room temperature were investigated. A sheet resistance of $13.5\;{\Omega}{\square}$, average transmittance above 85 % in 550 nm, and root mean square roughness of $10.5\;{\AA}$ were obtained even in the IZO layers grown at room temperature in pure Ar ambient. Without addition of oxygen gas during IZO sputtering process, we can obtain high quality IZO anode films from the specially synthesized oxygen rich IZO target. XRD result shows that the IZO films grown at room temperature is completely amorphous structure due to low substrate temperature. In addition, the electrical and optical properties of the flexible OLED fabricated on IZO/$SiO_2$/PES/$SiO_2$ is critically influenced by the electrical properties of a IZO anode. This findings indicate that the IZO/$SiO_2$/PES/$SiO_2$ is a promising anode/substrate scheme for realizing organic based flexible displays.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.02a
• /
• pp.174-174
• /
• 2004

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.196-196
• /
• 2010

본 연구에서는 플렉시블 GZO 단일 박막과 GZO/Ag/GZO (GAG) 다층 박막을 연속 성막이 가능한 롤투롤 스퍼터링 시스템을 이용하여 상온 공정을 통해 성막하여 그 특성을 분석 하였다. 일반적으로 고품위의 GZO 박막을 제작하기 위해서는 고온 공정이 필수적인 것으로 알려져 있으나 본 실험에서는 플렉시블 PES 기판상에 상온 공정을 통해 후 열처리 없이 고품위의 GZO, GAG 박막을 얻을 수 있었다. 단일 GZO 박막은 공정 압력과 산소 유입량을 변화하여 제작하였고 GAG 다층 박막은 GZO-Ag-GZO로 이루어진 3개의 sputter gun을 이용하여 Ag 두께를 변수로 연속공정을 통해 제작하였다. 구조적, 표면석 특성 분석을 위해 XRD(X-ray diffraction), FE-SEM(Field emission scanning electron microscopy), HRTEM (High resolution electron microscopy)를 이용하였으며 광학적, 전기적 특성을 분석하기 위해 UV/Vis spectrometer, Hall effect measurement를 각각 이용하였다. 최적화된 GZO 단일 박막은 상온에서 열처리 없이 성막되었음에도 불구하고 38 ohm/sq의 낮은 저항과 86 %의 높은 투과도를 나타내었으며 GAG 다층 박막은 12 nm의 Ag 두께에서 6.4 ohm/sq의 낮은 저항과 88 %의 높은 투과율을 나타내었다. 특히 기계적 특성을 분석하기 위해 진행된 bending test에서 GAG 박막은 초기와 test 후에 저항과 표면에 변화가 없는 우수한 특성을 보였으며 이를 통해 플렉시블 태양전지와 디스플레이등 광학소자의 투명 전극으로서의 적용 가능성을 확인 할 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.43 no.1 s.284
• /
• pp.38-41
• /
• 2006

Surface of PC (Polycarbonate) and PES (Polyethersulphone) treated by plasma modification with rf power from 50 W to 200 W substrates in Ar (3 sccm), $O_2$ (12 sccm) atmosphere. From the results of modified substrates in XPS (X-ray Photoelectron Spectroscopy), the ratio of oxide containing bond increased with rf power. As the rf power was 200 W, the contact angle was the lowest value of 14.09 degree. And the datum from AFM (Atomic Force Microscopy), rms roughness value of PES and PC substrates increased with rf power. We could deposit $Ta_2O_5$ with good adhesion on plasma treated PES and PC substrates using by in-situ rf magnetron sputter.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.403-404
• /
• 2008

In this study, we prepared ITO thin film on glass, polycarbonate (PC) and polyethersulfone (PES) substrate in Facing Targets sputtering (FTS) system. Properties of as-deposited thin films's aging change were investigated as a function of time placed in the air. The electrical and optical properties of as-deposited thin films were employed by a four point probe and an UV/VIS spectrometer, an X-ray diffractometer (XRD), a Field Emission Scanning Electron Microscope(FESEM) and a Hall Effect measurement. As a result, as time went by, transmittance of all films did not change but resistivity of films was decreasing.