• 전기학회논문지
• /
• 제63권11호
• /
• pp.1526-1532
• /
• 2014

The Electronic Interlocking unit in railway signalling system is safety-related facilities to determine route and speed for train running. In particular, the SSI(Solid State Interlocking) is Electronic Interlocking unit for high-speed railway, and it performs safety-critical function by MPM(Micro-Processor Module). Meanwhile, MPM is composed of the PES(Programmable Electronic System)-based system, and the PES-based system in railway safety-related facilities should be implemented by complying with the safety requirements defined in IEC 62425 and IEC 61508. In this paper, we performed modeling of failure rate and reliability for MPM implemented by fault tolerance methods and analyzed functional safety for MPM. Moreover, we determined SIL(Safety Integrity Level) for MPM according to the safety requirements defined in IEC 61508 based on an analyzed functional safety.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.77-80
• /
• 2002

In this paper, We have studied for guaranteeing the clear display of MPEG-2 video sequence when conduct splicing of MPEG-2 system streams. we focus on the PES domain splicing considering video sequence. And we wish to make a base on the TS or PS domain splicing considering video sequence. For that, first, we compared and analyzed problems that is raised when different two PES streams are spliced and effects that affect the video sequence. And based on this analysis, we have searched for methods that resolve the cause of problems that can be happened in the display of video sequence directly in PES domain.

• 한국전기전자재료학회논문지
• /
• 제20권12호
• /
• pp.1072-1076
• /
• 2007

We prepared the Al doped ZnO (AZO) thin film on polyethersulfon (PES) without any substrate heating by Facing Targets Sputtering (FTS) system. FTS system has two different facing targets. One is ZnO doped the content of Al 2 wt% and the other is Zn in order to decrease resistivity. The electrical, structural and optical properties of AZO thin films were investigated. To evaluate the as-deposited thin film properties, we employed four-point probe (CMT-R100nw, Changmin), Surface profiler (Alpha-step, Tencor), UV/VIS spectrometer (HP), X-ray diffractometer (XRD, Rigaku) and Field Emission Scanning Electron Microscopy (FESEM, Hitachi S-4700). As a result, We obtained that AZO thin film deposited on PES substrate at a DC Power of 150 W, working pressure of 1 mTorr and $O_2$ gas flow ratio of 0.2 exhibited the resistivity of $4.2{\times}10^{-4}\;[{\Omega}cm]$ and the optical transmittance of about 85 % in the visible range.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.199-209
• /
• 2018

Polyethersulfone (PES)/sulfonated $TiO_2$ ($STiO_2$) nanoparticles (NPs) UF blended membranes were fabricated with different loadings of $STiO_2$. The modified membranes exhibited significant improvement in surface roughness, porosity, and pore size when compared to the PES membrane. The $P-STiO_2$ 1 and $P-TiO_2$ 1 blended membranes exhibited higher water flux, approximately 102.4% and 62.6%, respectively, compared to PES. SPP-$STiO_2$ and $P-STiO_2$ showed lower Rir fouling resistance than the $P-TiO_2$ blended membrane. Overall, the $STiO_2$-blended membranes provide high hydrophilicity permeability, anti-fouling performance, and improved BSA rejection attributed to the hydrogen bonding force and more electrostatic repulsion properties of $STiO_2$.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.319.1-319
• /
• 2002

A frequency-domain PES estimation and its prediction method are proposed for the tightly-coupled servo/mechanical design of high-TPI HDD system above 100kTPI. The major two disturbance energies which are related with mechanical vibrations inside of HDD are used to predict the drive-level PES, while considering closed-loop servo dynamics. One is the torque disturbance which mainly comes from aerodynamic excitation of HSA system and the other is the displacement disturbance from disk-spindle dynamics. (omitted)

• 한국염색가공학회지
• /
• 제32권2호
• /
• pp.103-110
• /
• 2020

Super engineering plastic(SEP) are applied to high performance and high value industries due to their excellent mechanical properties and high continuous operating temperature. Among them, PES and PEI are amorphous SEPs, and have the advantages of high flexibility, mechanical properties, transparency, and thermal stability. In this study, polyethersulfone(PES) and polyetherimide(PEI) fibers were manufactured to produce flame retardant artificial hair. PES and PEI fibers prepared through a melt-spinning process at a high temperature of 360 to 420℃. They are compared with commercial artificial hair by thermal gravimetric analysis(TGA), linear density, tenacity, and limited oxygen index(LOI) analysis. PES and PEI fibers have similar linear density and tenacity to commercial artificial hair, while their thermal stability and flame retardant are excellent. In particular, flame retardant was analyzed through LOI value and PES was 35.1%, which is superior to commercial artificial hair PET/Br(28.2%) and PET/P(20.2%). Therefore, PES and PEI are suitable as artificial hair for flame retardant.

• 대한물리의학회지
• /
• 제13권3호
• /
• pp.133-139
• /
• 2018

PURPOSE: Despite the abundant literature available regarding the activity of intrinsic muscles, few studies have investigated the muscle activity of extrinsic muscles. Therefore, the present study compared the muscle activity of the peroneus longus, tibialis anterior, and abductor hallucis during short foot exercise in subjects with and without flat feet. METHODS: Twelve subjects with and without pes planus participated in this study. During the short foot exercises, muscular activity of the tibialis anterior, fibularis longus, and abductor hallucis longus were measured in both groups. To identify the effects of short foot exercises, navicular drop height was also investigated in pre and post short foot exercises. RESULTS: In a symptomatic group, the navicular drop height was significantly reduced at post measurement compared with pre-measurement. During the short foot exercise, the pes planus group showed significantly lower activities of the fibularis longus than the control group (p<.05). CONCLUSION: Similar to previous studies and clinical literature, short foot exercise was effective for alleviating navicular drop for a population with pes planus. In addition, subjects with pes planus showed decreased muscular activities of the fibularis longus, which suggests that considering extrinsic muscles such as fibularis longus is also important for rehabilitation of pes planus patients.

• Membrane and Water Treatment
• /
• 제7권4호
• /
• pp.355-365
• /
• 2016

The improvement of fouling resistance of porous polymeric membrane is one of the most important targets in membrane preparation for water purification in many process like wastewater treatment. Membranes can be modified by various techniques, including the treatment of polymer material, blending of hydrophilic polymer into polymer solution, and post treatment of fabricated membrane. This research proposed the modifications of morphology and surface property of hydrophobic membrane by blending polyethersulfone (PES) with three polymeric additives, polyvinylpyrrolidone (PVP), Pluronic F127 (Plu), and Tetronic 1307 (Tet). PES hollow fiber membranes were fabricated via dry-wet spinning process by using a spinneret with inner and outer diameter of 0.7 and 1.0 mm, respectively. The morphology changes of PES blend membrane by those additives, as well as the change of performance in ultrafiltration module were comparatively observed. The surface structure of membranes was characterized by atomic force microscopy and Fourier transform infra red spectroscopy. The cross section morphology of PES blend hollow fiber membranes was investigated by scanning electron microscopy. The results showed that all polymeric additives blended in this system affected to improve the performances of PES membrane. The ultra-filtration experiment confirmed that PES-PVP membrane showed the best performance among the three membranes on the basis of filtration stability.

• 대한정형도수물리치료학회지
• /
• 제22권1호
• /
• pp.35-41
• /
• 2016

Background: The purpose of this study was to investigate the effect of modified reverse-six taping on the balance and gait performance in Pes Planus. Methods: A total of twelve subjects (4 males, 8 females) in Pes Planus participated in this study. Navicular drop test was used to evaluate Pes Planus. Balance performance(anterior-posterior; A-P, medial-lateral; M-L), overall) was evaluated using the Biodex balance system in two difference condition(no-taping, with reverse-six taping). Gait performance (cadence, velocity) was evaluated using GAITRite System in two difference condition (no-taping, with reverse-six taping). Results: There were significant improvements of A-P and overall in the balance performance after using reverse-six taping (p<.05). there was no significant improvements of M-L balance performance. and, there were no statistical difference of cadence and velocity in the gait performance after using reverse-six taping. Conclusions: This study found that modified reverse-six taping in Pes Planus was improve the balance performance. but dose not affect the gait performance.

• 한국의류학회지
• /
• 제41권3호
• /
• pp.420-432
• /
• 2017

This study examined user needs for compression pant development for women with pes planus in their 50s and 60s. A total of 355 women aged 50 to 69 participated in the survey and interview. Questions were asked if they had pes planus, the using condition of foot orthotic, inconveniences during gait, and wearing condition of compression pants. The results showed that 42 (11.8%) women had pes planus. Orthotic insole and arch support were used most frequently. The most uncomfortable aspect of foot orthotic (n=146) was that it was difficult to use unless they were going outside. Participants with pes planus responded that they felt discomfort on the inner area of propodium, metatarsus, ankle, and knee during gait. The purchase and wearing rate of compression pants were not high; however, compression pants were purchased with specific needs and purposes. Respondents mainly wore the compression pants for sports activities. M size was the most frequently worn size. They preferred high waist type leggings and there was a need to increase the compression strength of the waist, thigh, knee and ankle. Additionally, the ease of donning and doffing were discussed.