• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.328-332
• /
• 2009

A new malting barley variety, "Oreum", was developed from the a cross between 'Kinuyutaka' and 'Samdobori' at the Honam Agricultural Research Institute (HARI) in 2006. An elite line, YMB2077-2B-24-1-2, was selected in 2003 and designated as 'Milyang132'. It showed good agronomic performance in the regional adaptation yield trials (RYT) from 2004 to 2006, and was released with the name of "Oreum" having high yielding and BaYMV resistance. The average heading and maturing dates of "Oreum" were April 18 and May 24, which were 2 days later than 'Jinyang', a leading variety, at RYT. "Oreum" had longer culm length (75 cm), more spikes per $m^2$ (990), and lighter 1,000 grain weight (35.2 g) than those of 'Jinyang' in paddy field conditions. It was showed resistance to BaYMV at the regions of Naju, Jinju and Milyang but moderate resistance at Iksan. However, the response to other environmental stresses of was similar to 'Jinyang' The yield potential of "Oreum" was about 5.43 MT/ha, 4.93 MT/ha in upland and paddy fields which was about 80%, 35% higher than Jinyang in the regional adaptation yield trials (RYT), respectively. It has good malting quality including high grain assortment, germination capacity ratio, water sensitivity and high the malt production and the extract and short filtration speed than those of 'Jinyang'.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.903-916
• /
• 2021

An area's topography refers to the shape of the earth's surface, described by its elevation, slope, and aspect, among other features. The topographical conditions determine energy flowsthat move water and energy from higher to lower elevations, such as how much solar energy will be received and how much wind or rain will affect it. Another common factor, the topographic wetness index (TWI), is a calculation in digital elevation models of the tendency to accumulate water per slope and unit area, and is one of the most widely referenced hydrologic topographic factors, which helps explain the location of forest vegetation. Analyses of topographical factors can be calculated using a geographic information system (GIS) program based on digital elevation model (DEM) data. Recently, a large number of free open source software (FOSS) GIS programs are available and developed for researchers, industries, and governments. FOSS GIS programs provide opportunitiesfor flexible algorithms customized forspecific user needs. The majority of biodiversity in island areas exists at about 20% higher elevations than in land ecosystems, playing an important role in ecological processes and therefore of high ecological value. However, island areas are vulnerable to disturbances and damage, such as through climate change, environmental pollution, development, and human intervention, and lacks systematic investigation due to geographical limitations (e.g. remoteness; difficulty to access). More than 4,000 of Korea's islands are within a few hours of its coast, and 88% are uninhabited, with 52% of them forested. The forest ecosystems of islands have fewer encounters with human interaction than on land, and therefore most of the topographical conditions are formed naturally and affected more directly by weather conditions or the environment. Therefore, the analysis of forest topography in island areas can be done more precisely than on its land counterparts, and therefore has become a major focus of attention in Korea. This study is focused on calculating the performance of different topographical factors using FOSS GIS programs. The test area is the island forests in Korea's south and the DEM of the target area was processed with GRASS GIS and SAGA GIS. The final slopes and TWI maps were produced as comparisons of the differences between topographic factor calculations of each respective FOSS GIS program. Finally, the merits of each FOSS GIS program used to calculate the topographic factors is discussed.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.313-317
• /
• 2010

There are the farmer's needs to develop early-maturing cultivar adaptable to mid-northern inland plain and alpine area. Furthermore, it is required to develop a rice variety to produce new rice before concentrated marketing dates, even in the years of early Chuseok. 'Joun' is a new extremely early-maturing japonica rice cultivar developed in 2009 from the cross of SR14880-173-3-3-2-2-2/Unbong20 at Cheolwon Substation, National Institute of Crop Science (NICS), Rural Development Administration (RDA). The heading date of 'Joun' is July 23 in mid-northern alpine area, which is 7 days earlier than that of Odaebyeo. It has about 61 cm in culm length with semi-erect plant type. Panicle has a few awns and its exertion is good. The number of spikelets per panicle is smaller than that of Odaebyeo and 1,000 grain-weight of brown rice is 21.2 g which is less than 26.3 g of Odaebyeo, but the complete grain ratio is higher. Milled kernels are translucent with non-glutinous endosperm and palatability of cooked rice is good. It shows strong resistance to cold treatment, lodging, premature heading, wilting and viviparous germination during ripening stage. This cultivar shows resistance to leaf blast disease but susceptible to bacterial blight, virus disease and insect pests. The milled rice yield performance of 'Joun' is about 5.18 MT/ha by ordinary culture in local adaptability test for three years. This cultivar may be highly adaptable to the mid-northern inland plain and alpine area, north-eastern coastal area and middle plain area.

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.513-518
• /
• 2011

'Hongjinju', the reddish brown coloured rice variety, was developed by the rice breeding team of National Institute of Crop Science, RDA during the period from 1990 to 2006 and released in 2007. The cultivar was derived from a cross between Suwon 383, and $SR18164F_2$, a reddish brown pigmented line. 'Hongjinju' is medium maturity with 133 days of growth duration from seeding to heading and is japonica-type with about 82 cm in culm length. 'Hongjinju' has slightly less number of tillers per hill and more spikelets of panicles than those of 'Heugjinjubyeo'. It is susceptible to leaf blast, other disease and insect pests. It shows intermediate germination ratio at low temperature and similar tolerance to leaf discolor at seeding stage and heading-delay but it is resistant to spikelets-sterility type of cold damage at maturing stage compared with 'Heugjinjubyeo'. The yield performance of this variety in brown rice is about 5.07 MT/ha and is adaptable to the central and southern plain areas of Korea.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.484-489
• /
• 2008

A new whole crop silage barley cultivar, "Youngyang", was developed from the cross between "Bunong and Milyang55 at the Yeongnam Agricultural Research Institute (YARI) in 2002. An elite line, YB3882-3B-17-1-3-1, was selected in 1999 and designated as "Milyang111". It showed good agronomic performance in the regional adaptation yield trials (RYT) from 2000 to 2002 and was released by the name of "Youngyang" with higher yield and better animal feed quality than that of Olbori. The average heading and maturing dates of Youngyang were May 2 and June 6, which were late by 2 & 1 days than those of Olbori, respectively, in Suwon. Youngyang had longer culm length, 83cm but it had lesser spikes per $m^2$ 637 than that of Olbori, respectively, in RYT from 2000 to 2002. The rate of leaf sheath/whole length (culm+leaf) and the rate of the grains/whole crop weight was similar to Olbori. It showed resistance to BaYMV at the regions of Naju, Jinju, Milyang andt Iksan. however, the response of Youngyang to other environmental stresses (tolerance of cold and wet) was similar to Olbori. The dried whole crop yield potential of Youngyang in the RYT was about 11.67 MT/ha in paddy fields which was about 18% higher than that of Olbori. The grain yield potential was 6.32 MT/ha in paddy fields which was about 5% higher than that of Olbori. Youngyang had lower rate of shattering, higher content of protein and NDF, lower ADF and TDN, and better quality of silage than those of Olbori.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.291-314
• /
• 2018

In recent 3 years, Korea's low-cost airlines have expanded their areas of passenger transportation not only to domestic market but also to Japan, China, Southeast Asia and US territory as a total of 6 companies (8 airlines including small air operation business carriers). Currently, three more airlines have filed for air transportation business certification as future low-cost carriers, and this expansion is expected to continue. To cope with the aggressive airline operations of domestic and foreign low-cost carriers and to enhance their competitiveness, each low-cost airline is taking a number of strategies for promoting cabin service. Therefore, the workload of the cabin crew is increased in proportion to the expansion, and the fatigue directly connected with the safety task performance is increased. It is stipulated in the Enforcement Regulations of the Korea Aviation Safety Act that at minimum, one cabin crew is required per 50 passenger seating capacity, and all low cost carriers are boarding only the minimum cabin crew. Sometimes it is impossible for them to sit in a floor level emergency exit for evacuation, which is the main task of the cabin crew, and this can cause confusion among evacuating passengers in the event of an emergency. In addition, if one of the minimum cabin crew becomes incapacitated due to an injury or the like, it will become a serious impediment in performing emergency evacuation duties. Even in the normal situation, since it will be violating the Act prescription on the minimum cabin crew complement, passengers will have to move to another available airline flights, encountering extreme inconvenience. Annex 6 to the Convention on International Civil Aviation specifies international standards for the determination of the minimum number of cabin crew shall be based only on the number of passenger seats or passengers on board for safe and expeditious emergency evacuation. Thereby in order to enhance the safety of the passengers and the crew on board, it is necessary to consider the cabin crew's fatigue that may occur in the various job characteristics (service, safety, security, first aid)and floor level emergency exit seating in calculating the minimum number of cabin crew. And it is also deemed necessary for the government's regulatory body to enhance the cabin safety for passengers and crew when determining the number of minimum cabin crew by reflecting the cabin crew's workload leading to their fatigue and unavailability to be seated in a floor level emergency exit on low cost carriers.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.10
• /
• pp.261-268
• /
• 2021

Cloud computing is a computing paradigm in which users can utilize computing resources in a pay-as-you-go manner. In a cloud system, resources can be dynamically scaled up and down to the user's on-demand so that the total cost of ownership can be reduced. The Modeling and Simulation (M&S) technology is a renowned simulation-based method to obtain engineering analysis and results through CAE software without actual experimental action. In general, M&S technology is utilized in Finite Element Analysis (FEA), Computational Fluid Dynamics (CFD), Multibody dynamics (MBD), and optimization fields. The work procedure through M&S is divided into pre-processing, analysis, and post-processing steps. The pre/post-processing are GPU-intensive job that consists of 3D modeling jobs via CAE software, whereas analysis is CPU or GPU intensive. Because a general-purpose desktop needs plenty of time to analyze complicated 3D models, CAE software requires a high-end CPU and GPU-based workstation that can work fluently. In other words, for executing M&S, it is absolutely required to utilize high-performance computing resources. To mitigate the cost issue from equipping such tremendous computing resources, we propose HEMOS-Cloud service, an integrated cloud and cluster computing environment. The HEMOS-Cloud service provides CAE software and computing resources to users who want to experience M&S in business sectors or academics. In this paper, the economic ripple effect of HEMOS-Cloud service was analyzed by using industry-related analysis. The estimated results of using the experts-guided coefficients are the production inducement effect of KRW 7.4 billion, the value-added effect of KRW 4.1 billion, and the employment-inducing effect of 50 persons per KRW 1 billion.

• Journal of The Korean Association For Science Education
• /
• v.42 no.3
• /
• pp.325-340
• /
• 2022

This study attempts to analyze the causes of low affective achievement of elementary, middle, and high school students in Korea in science. To this end, a total of 27 students, three to four students per grade, were interviewed by grade from the fourth grade of elementary school to the first grade of high school, and a total of nine teachers were interviewed by school level. In the interview, related questions were asked in five sub-areas of the 'Indicators of Positive Experiences about Science': 'Science Academic Emotion', 'Science-Related Self-Concept', 'Science Learning Motivation', 'Science-Related Career Aspiration', and 'Science-Related Attitude'. Interview contents were recorded, transcribed, and categorized. As a result of examining the causes of low science academic emotion, it was found that students experienced negative emotions when experiments are not carried out properly, scientific theories and terms are difficult, and recording the inquiry results is burdensome. In addition, students responded that science-related self-concept changed negatively due to poor science grades, difficult scientific terms, and a large amount of learning. The reasons for the decline in science learning motivation were the lack of awareness of relationship between science class content and daily life, difficulty in science class content, poor science grades, and lack of relevance to one's interest or career path. The main reason for the decline in science-related career aspirations was that they feel their career path was not related to science, and due to poor science performance. Science-related attitudes changed negatively due to difficulties in science classes or negative feelings about science classes, and high school students recognized the ambivalence of science on society. Based on the results of the interview, support for experiments and basic science education, improvement of elementary school supplementary textbook 'experiment & observation', development of teaching and learning materials, and provision of science-related career information were proposed.

• Journal of Bio-Environment Control
• /
• v.32 no.1
• /
• pp.40-47
• /
• 2023

There are many different types of cultivation in tomatoes for year-round production. One of them, semi-forcing cultivation is characterized by growing seedlings in winter season. If grafted seedlings are used in winter season that energy cost can be reduced, because they have tolerance to cold stress. This study was conducted to analyze the rootstock performance by measuring the growth, yield, and leaf-macronutrient content of cherry tomatoes grown in semi-forcing hydroponics. Three domestic rootstocks 'HSF4', '21LM', '21A701', and a control cultivar 'B-blocking' were grafted onto jujube-shaped cherry tomato (Lycopersicon esculentum L.) commercial cultivar 'Nonari'. The total yield per plant with grafted cherry tomato '21A701' was 3,387g, which was 11%, 22% and 24% higher than the yield with 'B-blocking', non-grafted one and 'HSF4'. The stem diameter of '21A701' was thick with 8.26mm, whereas non-grafted one was thin with 7.23mm at 160 days after transplanting. The flowering position of '21LM' was 34% and 47% higher than the flowering position of 'B-blocking' and non-grafted one at 153 days after transplanting. The NO₃-N concentration in petiole sap of '21LM' was the highest with 1,746mg·L^-1 and non-grafted one and 'HSF4' were the lowest with 1,252mg·L^-1 and 1,245mg·L^-1 at 167 days after transplanting. The results indicated that rootstock/scion combinations in cherry tomatoes can affect the plant growth, yield, and the concentration of different NO₃-N in leaves at the late growth stage. Both '21A701' and '21LM' have vigorous root system, which influence the growth and yield increased.

• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.430-441
• /
• 2023

Velvet antler is widely used as a traditional medicine, and numerous studies have demonstrated its tremendous nutritional and medicinal values including immunity-enhancing effects. This study aimed to investigate different deer velvet extracts (Sample 1: raw extract, Sample 2: dried extract, and Sample 3: freeze-dried extract) for proximate composition, uronic acid, sulfated glycosaminoglycan, sialic acid, collagen levels, and chemical components using ultra-performance liquid chromatography-quadrupole-time-of-light mass spectrometry. In addition, we evaluated the cytotoxic effect of the deer velvet extracts on BV2 microglia, HT22 hippocampal cells, HaCaT keratinocytes, and RAW264.7 macrophages using the cell viability MTT assay. Furthermore, we evaluated acute toxicity of the deer velvet extracts at different doses (0, 500, 1000, and 2000 mg/kg) administered orally to both male and female ICR mice for 14 d (five mice per group). After treatment, we evaluated general toxicity, survival rate, body weight changes, mortality, clinical signs, and necropsy findings in the experimental mice based on OECD guidelines. The results suggested that in vitro treatment with the evaluated extracts had no cytotoxic effect in HaCaT keratinocytes cells, whereas Sample-2 had a cytotoxic effect at 500 and 1000 ㎍/mL on HT22 hippocampal cells and RAW264.7 macrophages. Sample 3 was also cytotoxic at concentrations of 500 and 1000 ㎍/mL to RAW264.7 and BV2 microglial cells. However, the mice treated in vivo with the velvet extracts at doses of 500-2000 mg/kg BW showed no clinical signs, mortality, or necropsy findings, indicating that the LD50 is higher than this dosage. These findings indicate that there were no toxicological abnormalities connected with the deer velvet extract treatment in mice. However, further human and animal studies are needed before sufficient safety information is available to justify its use in humans.