• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.423-424
• /
• 2008

A facing target sputtering (FTS) equiment is fabricated and its process characteristics are investigated to search for the possibility of applications to film passivation system for organic light emitting diodes (OLEDs). We report that the FTS system can prepare a high quality $ZrO_2$ films with a dense micro structure and an excellent uniformity less than 5% and a high transmittance over an average 80% in the visible range. We suggest that the FTS is one of the suitable deposition techniques for the thin film passivation layer of OLEDs and the gas barrier layer of polymer substrate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.2
• /
• pp.263-271
• /
• 2010

This trial was conducted to determine the effects of feeding a diet containing solid-state fermented rapeseed meal on performance, nutrient digestibility, intestinal ecology and intestinal morphology of broiler chickens. A mixed liquid culture, containing approximately 5 log cfu/ml Lactobacillus fermentum, Enterococcus faecium, Saccharomyces cerevisae and Bacillus subtilis was prepared in a 1:1:1:1 ratio. A basal substrate (BS) containing 75% rapeseed, 24% wheat bran and 1% brown sugar was mixed with the liquid culture in a ratio of 10:3. Over the 30-day fermentation, isothiocyanates were reduced from 119.6 to 14.7 mmol/kg. A total of 168, day-old male Arbor Acres broiler chicks were assigned to one of three dietary treatments including a corn-soybean meal based control diet as well as two experimental diets in which the control diet was supplemented with 10% of the BS containing unfermented rapeseed meal or 10% of the BS containing rapeseed meal subjected to solid state fermentation. There were 8 pens per treatment and 7 birds per pen. From days 19-21 and days 40-42, uncontaminated excreta were collected from each pen for digestibility determinations. In addition, digesta from the colon and ceca were collected to determine the number of lactobacilli, enterobacteria and total aerobes. The middle sections of the duodenum, jejunum, and ileum were collected for intestinal morphology. Over the entire experimental period (d 1-42), the weight gain and feed conversion of birds fed fermented rapeseed meal were superior (p<0.05) to that of birds fed nonfermented rapeseed meal and did not differ from the soybean control. On day 42, birds fed fermented rapeseed meal had higher (p<0.05) total tract apparent digestibility coefficients for dry matter, energy, and calcium than birds fed non-fermented rapeseed meal. Colon and ceca digesta from broilers fed the fermented feed had higher (p<0.05) lactobacilli counts than birds fed the control and non-fermented rapeseed meal diets on day 21 and 42. Fermentation also improved (p<0.05) villus height and the villus height:crypt depth ratio in the ileum and jejunum on day 21 and 42. The results indicate that solid-state fermentation of rapeseed meal enhanced performance and improved the intestinal morphology of broilers and may allow greater quantities of rapeseed meal to be fed to broilers potentially reducing the cost of broiler production.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.138-139
• /
• 2009

폴리머 기판위에서 ICP-RIE 방법을 이용하여 $O_2$ 플라즈마 전처리효과에 따른 GZO박막의 전기적, 광학적인 특성을 고찰 하였다. ICP-RIE 방법을 이용하여 폴리머 기판 위에 $O_2$ 플라즈마 전처리의 공정 값은 공정압력은 20 mTorr, 파워는 100 W로 하고 변수로는 시간을 60초 ~ 600초로 하였다. $O_2$ 플라즈마 전처리한 기판위에 RF Sputtering 방법을 이용하여 4인치의 GZO(ZnO: 95 wt%, $Ga_2O_3$: 5 wt%) 타겟을 사용하여 공정압력은 5 mTorr, 파워는 150 W, 박막의 두께는 500 nm의 조건으로 박막을 증착하였다. PET 기판의 600초의 $O_2$ 플라즈마 처리 후 증착한 GZO 박막의 비저항이 $6.2\times10^{-3}\;{\Omega}$-cm이었고, PEN 기판의 120초의 $O_2$ 플라즈마 처리 후 증착한 GZO 박막의 비저항이 $1.1\;{\times}\;10^{-3}\;{\Omega}$-cm이었다. 또한 300 nm 이하의 자외선 영역에서는 뛰어난 광 차단 효과를 가지고 있었으며, 가시광선 영역 (400 nm ~ 700 nm)에서 증착 된 시편들이 80 % 광 투과율을 나타내었다.

• Korean Journal of Materials Research
• /
• v.22 no.9
• /
• pp.454-458
• /
• 2012

Various adhesive materials are used in flip chip packaging for electrical interconnection and structural reinforcement. In cases of COF(chip on film) packages, low temperature bonding adhesive is currently needed for the utilization of low thermal resistance substrate films, such as PEN(polyethylene naphthalate) and PET(polyethylene terephthalate). In this study, the effects of anhydride and dihydrazide hardeners on the low-temperature snap cure behavior of epoxy based non-conductive pastes(NCPs) were investigated to reduce flip chip bonding temperature. Dynamic DSC(differential scanning calorimetry) and isothermal DEA(dielectric analysis) results showed that the curing rate of MHHPA(hexahydro-4-methylphthalic anhydride) at $160^{\circ}C$ was faster than that of ADH(adipic dihydrazide) when considering the onset and peak curing temperatures. In a die shear test performed after flip chip bonding, however, ADH-containing formulations indicated faster trends in reaching saturated bond strength values due to the post curing effect. More enhanced HAST(highly accelerated stress test) reliability could be achieved in an assembly having a higher initial bond strength and, thus, MHHPA is considered to be a more effective hardener than ADH for low temperature snap cure NCPs.

• Journal of Animal Science and Technology
• /
• v.57 no.1
• /
• pp.3.1-3.6
• /
• 2015

This study investigated the effects of feeding by-product feed (BF)-based silage on the behavior of growing Hanwoo heifers. Twelve Hanwoo heifers (13.2 months-old, 315 kg body weight; four heifers per pen) were assigned to three diets: a rice straw (RS) diet (concentrate mix and free access to RS), a RS and BF-based silage (RSBFS) diet (concentrate mix and free access to RS and BF-based silage), and a BF-based silage (BFS) diet (concentrate mix and free access to BF-based silage). Behavior was recorded for 5 days using camcorders. Compared to the RS group, the BFS group showed 21.7% higher dry matter intake, shorter feeding, rumination, and chewing times, as well as longer resting time (p < 0.05). Although all groups exhibited similar drinking, urination, and defecation frequencies, the BFS group exhibited higher feeding rates, rumination efficiency, and chewing efficiency than the RS group (p < 0.05). Compared to the BFS group, the RSBFS group showed higher $peNDF_{8.0}$ intake (15.2% vs. 25.0% dry matter intake), longer feeding and sitting times, lower defecation frequency (p < 0.05), and similar rumination efficiency. In conclusion, complete replacement of conventional RS with BF-based silage reduced rumination and chewing activity in growing Hanwoo heifers, and BF-based silage feeding with large-particle straw is an effective approach in improving heifer behavior.

• Korean Journal of Materials Research
• /
• v.19 no.4
• /
• pp.224-227
• /
• 2009

Nanofabrication is an essential process throughout industry. Technologies that produce general nanofabrication, such as e-beam lithography, dip-pen lithography, DUV lithography, immersion lithography, and laser interference lithography, have drawbacks including complicated processes, low throughput, and high costs, whereas nano-transfer printing (nTP) is inexpensive, simple, and can produce patterns on non-plane substrates and multilayer structures. In general nTP, the coherency of gold-deposited stamps is strengthened by using SAM treatment on substrates, so the gold patterns are transferred from stamps to substrates. However, it is hard to apply to transfer other metallic materials, and the existing nTP process requires a complicated surface treatment. Therefore, it is necessary to simplify the nTP technology to obtain an easy and simple method for fabricating metal patterns. In this paper, asnTP process with poly vinyl alcohol (PVA) mold was proposed without any chemical treatment. At first, a PVA mold was duplicated from the master mold. Then, a Mo layer, with a thickness of 20 nm, was deposited on the PVA mold. The Mo deposited PVA mold was put on the Si wafer substrate, and nTP process progressed. After the nTP process, the PVA mold was removed using DI water, and transferred Mo nano patterns were characterized by a Scanning electron micrograph (SEM) and Energy Dispersive spectroscopy (EDS).

• Korean Journal of Materials Research
• /
• v.27 no.9
• /
• pp.501-506
• /
• 2017

Surface morphology and optical properties such as transmittance and haze effect of glass etched by physical and chemical etching processes were investigated. The physical etching process was carried out by pen type sandblasting process with $15{\sim}20{\mu}m$ dia. of $Al_2O_3$ media; the chemical etching process was conducted using HF-based mixed etchant. Sandblasting was performed in terms of variables such as the distance of 8 cm between the gun nozzle and the glass substrate, the fixed air pressure of 0.5bar, and the constant speed control of the specimen stage. The chemical etching process was conducted with mixed etching solution prepared by combination of BHF (Buffered Hydrofluoric Acid), HCl, and distilled water. The morphology of the glass surface after sandblasting process displayed sharp collision vestiges with nonuniform shapes that could initiate fractures. The haze values of the sandblasted glass were quantitatively acceptable. However, based on visual observation, the desirable Anti-Glare effect was not achieved. On the other hand, irregularly shaped and sharp vestiges transformed into enlarged and smooth micro-spherical craters with the subsequent chemical etching process. The curvature of the spherical crater increased distinctly by 60 minutes and decreased gradually with increasing etching time. Further, the spherical craters with reduced curvature were uniformly distributed over the etched glass surface. The haze value increased sharply up to 55 % and the transmittance decreased by 90 % at 60 minutes of etching time. The ideal haze value range of 3~7 % and transmittance value range of above 90 % were achieved in the period of 240 to 720 minutes of etching time for the selected concentration of the chemical etchant.