• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.48-51
• /
• 2004

In this paper the importance of re-nitridation on a plasma-enhanced chemical-vapor deposited(PECVD) $SiO_2$ stacked on a thermally grown thin-nitrided $SiO_2$ on n-type 4H SiC have been investigated. Without the final re-nitridation process, the leakage current of metaloxidesemiconductor(MOS) was extremely large. It is believed that water and carbon, contamination from the low-thermal budget PECVD process, are the main factors that destroyed the high quality thin-buffer nitrided oxide. After re-nitridation annealing, the quality of the stacked gate oxide was improved. The reasons of this improvement are presented.

• 한국세라믹학회지
• /
• 제31권5호
• /
• pp.485-490
• /
• 1994

The reactive ion etching characteristics of aluminum oxide films, prepared by PECVD, were investigated in the CCl4 plasma. The atomic chlorine concentration and the DC self bias were determined at various etching conditions, and their effects on the etch rate of aluminum oxide film were studied. The bombarding energy of incident particles was found to play the more important role in determining the etch rate of aluminum oxide rather than the atomic chlorine concentration. It is considered to be because the bombardment of ions or neutral atoms breaks the strong Al-O bonds of aluminum oxide to help activate the formation reaction of AlCl3 which is the volatile etch product.

• 전자공학회논문지A
• /
• 제29A권8호
• /
• pp.63-70
• /
• 1992

Deposition properties and film characteristics of Remote PECVD silicon dioxide were investigated. Using $N_{2}O/SiH_{4}$, the effects of changing the process conditions` the pressure, the substrate temperature, and the gas mixing ration, on the film quality were observed. A comparison of film qualites of the Remote PECVD SiO$_2$ with that of a Direct PECVD SiO$_2$ was made. The experimental results show that the Remote PECVD SiO$_2$ has better electrical, physical, and annealing properties than the Direct PECVD oxide.

• 한국진공학회지
• /
• 제5권3호
• /
• pp.223-228
• /
• 1996

$SiO_2$ insulator layers on InSb have been prepared by remote PECVD system a low temperature below $200^{\circ}C$. The effects of deposition pressure, temperature, and gas flow ratio on the physical and electrical characteristics of the $SiO_2$ were studied. The InSb MIS device using $SiO_2$ was fabricated and measured its current-voltage and capacitance-voltage characteritance-voltage charateristics at 77K. The films evaluated Auger electron spectroscopy showed that composition atoms were distributed uniformaly throughout the oxide film and the outdiffusion of substrate atoms into the oxide were few. The leakage current density of the MIS device was about 6.26nA/$\textrm{cm}^2$ at 0.75MV/cm , and the breakdown voltage was about 1MV/cm. The interface-stage density at mid-bandgap extracted from 1MHz C-V measurement was $54\times 10^{11}\textrm{cm}^2-2V^{-1}$.

• 한국진공학회지
• /
• 제2권4호
• /
• pp.462-467
• /
• 1993

ECR PECVD(Electron Cyclotron Resonance Plasma Enhanced Chemical Vapor Deposition )장치를 이용하여 (100) 실리콘 기판 위에 실리콘 산화막을 상온에서 증착하였다. 기체 유량비(SiH4/O2)가 막의 성질에 미치는 영향을 고찰하여 최적의 증착 조건을 도출하였다. 기체 유량비가 0.071일 때 비가역 파괴 전장은 9~10MV/cm 이었고, 4~5MV/cmm의 전장하에서 누설 전류는 ~10-11 A/$ extrm{cm}^2$이었다. 이러한 수치들은 액정 표시 소자용 박막 트랜지스터와 같이 저온의 제조공정이 요구되는 소자를 만들기에 충분하다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 춘계 학술발표 강연 및 논문 개요집
• /
• pp.121-122
• /
• 1994

• 한국전기전자재료학회논문지
• /
• 제19권7호
• /
• pp.680-686
• /
• 2006

Tin oxide$(SnO_2)$ thin films were prepared on glass substrate by Plasma Enhanced Chemical Vapor Deposition (PECVD) method. $SnO_2$ thin films were prepared using gas mixture of dibutyltin diacetate as a precursor and oxygen as an oxidant at 275, 325, 375, $425^{\circ}C$, respectively as a function of deposition temperature. The XRD peaks corresponded to those of polycrystalline $SnO_2$, which is in the tetragonal system with a rutil-type structure. As the deposition temperature increased, the texture plane of $SnO_2$ changed from (200) plane to denser (211) and (110) planes. Lower deposition temperature and shorter deposition time led to decreasing surface roughness and electrical resistivity of the formed thin films at $325\sim425^{\circ}C$. The properties of $SnO_2$ films were critically affected by deposition temperature and time.

• 한국전기전자재료학회논문지
• /
• 제23권11호
• /
• pp.831-836
• /
• 2010

In this paper, Plasma Enhanced Chemical Vapor Deposition (PECVD) $SiO_2$ film properties are modeled using statistical analysis and neural networks. For systemic analysis, Box-Behnken's 3 factor design of experiments (DOE) with response surface method are used. For characterization, deposited film thickness and film stress are considered as film properties and three process input factors including plasma RF power, flow rate of $N_2O$ gas, and flow rate of 5% $SiH_4$ gas contained at $N_2$ gas are considered for modeling. For film thickness characterization, regression based model showed only 0.71% of root mean squared (RMS) error. Also, for film stress model case, both regression model and neural prediction model showed acceptable RMS error. For sensitivity analysis, compare to conventional fixed mid point based analysis, proposed sensitivity analysis for entire range of interest support more process information to optimize process recipes to satisfy specific film characteristic requirements.

• 대한전자공학회논문지
• /
• 제22권2호
• /
• pp.97-105
• /
• 1985

PECVD 방법으로 만들어진 도핑한 박막에서 실리콘으로의 인이나 붕소의 확산 특성이 연구되었다. CVD PSC 박막도 역시 만들어면 PECVD PSG에 있는 인의 확산특성과 나란히 비교되었다. 인의 부산은 N2와 O2 분위기 및 1000℃, 1,050℃, 1,100℃의 온도에서 수행되었다. 붕소의 확산 변수들은 B2H2유량 및 박막형성 온도를 달리하여 만들어진 박막에 관하여 고찰되었다. 실리콘으로의 주입물 확산 계수와 확산 Profile이 측정된 혹산 깊이 및 불순물 표면 농도를 써서 Barry의 모델을 적용하여 계산되었다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.171-175
• /
• 1995

Optimum condition of remote plasma enhanced chemical vapor deposition using orthogonal array method was chosen. Characteristics of oxide films deposited by RPECVD with SiH$_{4}$ and N$_{2}$O gases were investigated. Etching rate of the optimized SiO$_{2}$ films in P-etchant was about 6[A/s] that was almost the same as that the high temperature thermal oxide. The films showed high dielectric breakdown field of more than 7[MV/cm] and a resistivity of 8*10$^{13}$ [.ohmcm] around at 7[MV/cm]. The interface trap density of SiO$_{2}$/Si interface around the midgap derived from the high frequency C-V curve was about 5*10$^{10}$ [/cm$^{2}$eV]. It was observed that the dielectric constant of the optimized SiO$_{2}$ film was 4.29.