• Journal of Korean Society of Steel Construction
• /
• v.19 no.5
• /
• pp.483-492
• /
• 2007

Pre-Engineering Building (PEB) system is one of the most economical structural systems. Tapered members can resist a maximum stress at a single location, whereas stresses of the rest of the members are considerably low. This results in appreciable savings both in terms of materials and construction costs. However, it was appreciated that special consideration would be required for certain aspects of this structural form. In particular, because of their slenderness, webs would buckle laterally and torsionally under the combined action of excessive axial, bending and shear forces. In this study, a total of four large-scale rafters with simple ends were tested. The main parameters were the width-thickness ratio of the web, the stiffener, and the flange brace. The purpose of this experiment is to evaluate the structural stability and to offer back-data on PEB design.

• Computational Structural Engineering
• /
• v.23 no.6
• /
• pp.15-20
• /
• 2010

• Journal of Korean Association for Spatial Structures
• /
• v.14 no.1
• /
• pp.7-11
• /
• 2014

• Journal of Korean Association for Spatial Structures
• /
• v.2 no.3 s.5
• /
• pp.38-42
• /
• 2002

• Journal of Animal Environmental Science
• /
• v.15 no.1
• /
• pp.17-28
• /
• 2009

PEB system is more economical when compared with structures commonly used Hot rolled and welded light H-beam was introduced in the Standard Livestock Housing. This study suggested more economical technology for structural design by the reduction of live load, relief of deflection limit and reduction of importance factor. And, when applying wind Load as a result of examination with Low Rise Building Systems Manual considering open model, we can know that when the wind load is big, enclosed model is more stable than open model. In short, Suggesting more economical model and providing the method to reduce natural disaster, by the application of PEB system and the development of technology for structural design, are considered to strengthen the competitive power of farmhouse.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.357-365
• /
• 2011

The current trends in steel construction intend to use tapered sections to minimize as much as possible the use of excess material. This can be done by choosing the cross-sections to be as economical as possible, leaving the classical approach of using prismatic members. In addition, it is important to predict the buckling behavior of tapered member with large depth-to-thickness ratio in order to prevent the collapse of PEB system subjected to overloads. An experimental investigation of buckling behavior of tapered beam was presented. The primary test parameter was depth-to-thickness ratio and taper ratio. Using initial stiffness and load-carrying capacity proposed by current provision, the simple plastic hinge method using modified Yoda's model and finite element analysis, the prediction of a moment-rotation curve of linearly tapered member was presented. Moreover, comparisons between analytical and experimental data for moment-rotation curves were accomplished.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.3
• /
• pp.257-265
• /
• 2012

Current trends in steel construction include using tapered, non-compact sections to minimize the use of excess material as much as possible by choosing the cross-sections instead of the classical approach of using prismatic members. In addition, snug conditions, especially the end-plate type, have the advantage of incurring less construction costs and shorter assembly times as opposed to full pre-tensioned conditions. On the other hand, it is important to predict the collapse of the PEB system due to over-loading. Large-scale tests of tapered steel portal frames with non-compact sections were conducted. The primary test parameters included the bolt connection method and the loading condition (vertical and horizontal load). The test results on initial stiffness and load capacity were investigated. Furthermore, comparisons between the analytical and experimental data for load-displacement curves were initiated. In addition, we evaluated the applicability of a snug bolt for the PEB frame in the field.

• Computational Structural Engineering
• /
• v.23 no.6
• /
• pp.8-14
• /
• 2010

• Journal of Korean Association for Spatial Structures
• /
• v.14 no.1
• /
• pp.12-21
• /
• 2014

• Textile Coloration and Finishing
• /
• v.31 no.3
• /
• pp.195-213
• /
• 2019

The purpose of this study was to identify novel extracts of brawn algae with the high deodorant capacity and antioxidant activity. To achieves this, an composition, deodorant performance and free radical scavenging activity were analyzed in powder and water extracts of Ecklonia cava(PEC/EEC), Saccharina japonica(PSJ/ESJ), Eisenia bicyclis(PEB/EEB), Sargassum spp.(PSS/ESS) and Hizikia fusiformis(PHF/EHF) using several analytical methods. Major component of five powders was verified as PEC, phlorotannin; PSJ, alginic acid and glutamic acid; PEB, carotenoid, chlorophyll, phlorotannin, tocopherol and fucoxantin; PSS, ${\beta}$-carotene and polyphenol; PHF, tannin. The highest level of DPPH scavenging activity was detected in EEC($IC_{50}=23.018{\mu}g/ml$), followed by EEB, ESJ, EHF and ESS. The deodorizing performance to ammonia was maintained high level in PEC, PSJ, PEB and PSS, while PHF showed low level in the same condition. But, the deodorizing performance to acetic acid was slightly higher in PSJ and PEC than those of PEB, PSS and PHF. Based on the results of DPPH scavenging activity and deodorizing capacity, we selected fractions of S. japonica as leading extracts and further prepared the 70% acetone extract (AESJ) and 70% ethanol extract (EESJ) from PSJ. The contents of total flavonoid, total phenol and total condensed tannin was significantly increased with 112-209% in AESJ and EESJ compared to those of ESJ. Also, a similar enhancement was observed on the level of DPPH scavenging activity and deodorizing performance against ammonia/acetic acid in AESJ and EESJ. Therefore, these results suggest that AESJ and EESJ contained with high total phenol and total condensed tannin contents may exhibit high deodorant capacity and antioxidant activity as well as has the potential for use as a powerful biomaterial for antibacterial deodorant.