• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.77-80
• /
• 2000

This paper describes a new method to decide the margin for the sustain voltage of AC PDPs based on the wall-charge distribution. We model the discharge cell and measure the wall-charge when sustain pulses are applied to the AC PDP. The measured wall-charge distribution informs us of the voltage forming the maximum wall-charge which should be chosen as the sustain voltage.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.1088-1090
• /
• 2002

In this study, a new processing route of barrier ribs for the plasma display panels was attempted. A slurry containing ceramic powders for the barrier ribs, binder, hardener, and other additives, was molded into a PDMS mold by capillary infiltration process. The molded slurry was cured prior to mold removal. It was demonstrated that the process can fabricate successfully the cell type barrier ribs of PDP.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.313-315
• /
• 2007

3M has developed a Precision Replication Process for the production of PDP Barrier Ribs and other display devices. This process, is fast, clean and capable of producing very high resolution (FHD and beyond), high aperture ratio and fine cell structures. Recent advances in materials and process features will be discussed.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.55-59
• /
• 2003

본 연구에서는 새로 고안된 DC방전 AND gate를 구성하는 각 방전셀 상호간의 영향을 방전특성 측면에서 규명하였다. 4개의 각 셀은 서로 공간전하와 결합하여 깊은 연관이 있었으며 그 결과 PDP의 address 방전을 도와주기 위한 프라이밍 방전의 동작마진을 얻기가 매우 어렵다는 것을 정성적으로 알았다. 실험결과 각 전극의 최적화된 방전전압을 결정할 수 있었다.

• 조명전기설비학회논문지
• /
• 제20권7호
• /
• pp.6-13
• /
• 2006

각 종 전자 디바이스의 투명전도막으로 많이 사용되는 ITO 및 ZnO:Al 박막을 스퍼터링법에 의해 제작하였다. 가스압력 및 기판온도 등의 최적조건하에서 제작된 ITO 및 ZnO:Al 박막은 각각 $1.67{\times}10^{-3}[{\Omega}-cm]$ 및 $2.2{\times}10^{-3}[{\Omega}-cm]$의 비저항율과 89.61[%] 및 90.88[%]의 가시광 영역에서의 광투과율을 나타내었다. ZnO:Al과 ITO 투명전극을 이용하여 5인치의 PDP 셀을 동일한 제조조건하에서 제작하였다. ZnO:Al의 경우 Ne(base)-Xe(8%)의 가스 혼합비, 그리고 400[Torr]의 압력조건에서 가장 잘 동작되었으며, $200{\sim}300$[V]의 인가전압 범위에서 $836[cd/m^2]$의 평균휘도를 나타내었다. 고휘도 및 저 소비전력특성을 위한 중요한 파라메타인 광효율은 전원 주파수가 $10{\sim}50[Khz]$의 범위에서 $1.2{\sim}1.6[lm/W]$정도를 나타내었으며, ITO의 경우 휘도 및 광 발생 효율은 약 10[%]정도 상승하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1751-1754
• /
• 2004

Effects of delay on the discharge time lag and the controllability of weak discharge mode were studied under single cell driving circumstances of ac PDP. It was found that sufficient number of priming particle is necessary for inducing weak discharge in ramp voltage driving. Discharge time lag was reduced dramatically under priming condition. It is speculated that the increasement of strong discharge is related to the reduction of the $Xe^*(^3P_1)$ particles during the after glow.

• 전기학회논문지
• /
• 제58권6호
• /
• pp.1151-1156
• /
• 2009

Unstable sustain discharges can occur at the bottom cells of the panel at high temperature. To solve this problem, the wall charge variation during an address period was investigated. A test panel of 7.5 inch XGA level was used and one green cell was measured. In order to realize operating condition equal to that of the bottom cells of 50 inch panel, the addressing stress pulses are applied. It seems that the resultant wall charge loss during address period increased with increase of stress time, temperature, pressure and Xe %. Wall charge loss increases with potential difference between scan electrode and address electrode, therefore wall charge loss can be minimized by the increase of scan voltage during address period.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.65-68
• /
• 2008

In this study, in order to improve luminous efficacy of AC-PDP, the new facing discharge structure has been suggested. The suggested structure has tilted facing electrode. It shows lower discharge current, higher luminance and luminous efficacy compared with those of reference structure with coplanar electrode structure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.189-190
• /
• 2000

A plasma display panel(PDP) with a new discharge cells are investigated electrically and optically. These cells have the structure of a long discharge path length and a small electrode area. They have shown a higher luminous efficiency and a lower power consumption about $30{\sim}40%$ improvement than the conventional standard ac PDP cells.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.714-716
• /
• 2005

We studied the dependence of the electrical characteristics of MgO protecting layer on temperature in an AC PDP cell. Careful measurements of the surface resistance of MgO were performed for the temperature range from room temperature to $100^{\circ}C$ with and without the VUV illumination. Experimental results show that the resistivity is affected by not only the temperature but also VUV irradiation. The measurement of wall charge distribution and the address discharge delay time as to the temperature show that the resistivity change of MgO may affect the wall voltage and consequently the discharge delay time.