• Nuclear Engineering and Technology
• /
• v.26 no.2
• /
• pp.294-299
• /
• 1994

Margin benefits are quantatively assessed when a Digital Monitoring System(DMS) is assumed to be installed to an operating Westinghouse analog type plant. Applied plant and cycle is YongGwang Unit 1 Cycle 6. The referenced digital monitoring system is the COLSS (Core Operating Limit Supervisory System) of ABB-CE. Considered fuel design limits are DNBR and LDCA Fq. 2003-D Power distributions within the present CAOC (Constant Axial Offset Control) limits are calculated for the analysis. The most limiting DNB prevention event of CEA Withdrawal is analyzed with the ROPM (Required OverPower Margin) concept of ABB-CE. The result show that the DMS can bring around 7% more margins for both DNB and LOCA Fq standpoints of view. The DMS can also monitor the PCI (Pellet-Cladding Interaction) limits.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.543-544
• /
• 2006

This paper describes a simple real-time monitoring system for use in measurement subsystem of contact wire and geometry of overhead contact wire in electric railway. The system has been consists of a high speed CMOS camera with resolution $1024\;{\times}\;1280$ pixels, line type laser source with a power equal to 300 mW, and PC-based image acquisition system with PCI Express slot. National instrument LabVIEW (8.0) and vision acquisition software have been used in application programming interface for image acquisition, display, and storage with a frequency of sampling of 500 acquisitions per second.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.555-562
• /
• 2007

In order to display Bayer input stream received from CMOS image sensor to the display device, image signal processing must be performed. That is, the hardware performing the image signal processing for Bayer data is called ISP(Image Signal Processor). We can see real image through ISP processing. ISP executes functionalities for gamma correction, interpolation, color space conversion, image effect, image scale, AWB, AE and AF. In this paper, we obtained the optimum algorithm through software verification of ISP module for CMOS camera image sensor and described using VHDL and verified in ModelSim6.0a simulator. Also we downloaded into Xilinx XCV-1000e for the designed ISP module and completed the board level verification using PCI interface.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.2
• /
• pp.675-684
• /
• 2021

This paper aims to analyze factors influencing earnings of workers in Vietnam using provincial-level data from 2016 to 2018. We show the important determinants of earnings of workers of more than 15 years old including working hour, labor force, life expectancy, education, regulation measured by Provincial Competitiveness Index (PCI) and especially Industry 4.0, our major depart from literature proxies by government expenditure on science and technology, number of phone lines, and number of internet users. Working hours are a typical measurement of quantity of labor supplied. Labor force represents market size from the supply side. Life expectancy measures the health of laborers, a physical quality measure of workers. PCI stands for institutional status of the locality. Two most important factors of our interest are education, representing qualification of workers, and Industry 4.0, reflecting the new working environment of workers. By estimating a robust standard error fixed-effect model, we have evidence that all factors are significant in explaining earnings of Vietnamese workers. Education and IR4.0 play an important role in earnings of workers of Vietnam. Results also provide an estimation of Vietnam's labor supply in the context of Industry 4.0. In addition, findings contribute to explain the income discrepancy among Vietnamese provinces.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.6
• /
• pp.79-89
• /
• 2004

Fingerprint identification consists of user enrollment phase storing user's fingerprint in a database and user identification phase making a candidate list for a given fingerprint. straightforward approach to perform the user identification phase is to scan the entire database sequentially, and takes times for large-scale databases. In this paper, we develop a hardware design which can perform the user identification phase in real-time. Our design employs parallel processing techniques and has been implemented on a PCI-based platform containing an FPGA and SDRAMs. Based on the performance evaluation, our hardware implementation can provide a scalability and perform the fingerprint identification in real-time.

• Journal of Chest Surgery
• /
• v.38 no.11 s.256
• /
• pp.733-738
• /
• 2005

Background: The possibility of incomplete revascularization and development of flow competition after revascularization of the borderline lesion made the hybrid strategy as an option for complete revascularization. Material and Method: From January f998 to July 2004, 25 $(3.2\%)$ patients underwent hybrid revascularization among 782 total OPCAB procedures. Clinical results and angiographic patencies were evalulated. Percutaneous coronary intervention (PCI) was peformed before CABG in 8 patients and after CABG in 47 patients. Result: The causes of PCIs before CABG were to achieve complete revascularization with minimally invasive surgery (n=7) and emergent PCI for culprit lesion (n=1). The indications of PCIs after CABG were high possibility of flow competition in the borderline lesion of right coronary artery territory (n=8), diffuse atheromatous lesion preventing anastomosis of graft (n=5), severe calcified ascending aorta with no more arterial grafi available (n=3), and intramyocardial coronary lesion (n=1). Mean number of distal anastomoses was $2.3\pm1.0$. Mean number of lesions treated by PCI was $1.2\pm0.4$. There was no operative or procedure-related mortality. PCI-related complication was periprocedural myocardial infarction in one patient, and complications related to CABG were transient atrial fibrillation (n=5), perioperative myocardial infarction (n=1), and transient renal dysfunction (n=1). Early postoperative coronary angiography $(1.8{pm}1.6days)$ revealed $100\%$ patency rate of grafts (57/57). The stenosis occurred in one patient performed PCI before CABG, which was successfully treated with re-ballooning. During midterm follow-up (mean; $25{\pm}26$ months), 1 patient died of congestive heart failure. All survivors (n=24) accomplished follow-up coronary angiographics, which showed .all grafts (56/57) were patent except one string sign. In-stent restenosis was developed in 2 patients who received bare metal stents. Conclusion: In selected patients, complete revascularization was achieved with low risk by taking the hybrid strategy.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.21-28
• /
• 2014

Purpose : For non-small cell lung cancer, if the treatment volume is large or the total lung volume is small, and the tumor is located in midline of patient's body, total lung dose tends to increase due to tolerance dose of spinal cord. The purpose of this study is to compare and evaluate the total lung dose of three dimensional conformal radiotherapy(3D CRT), intensity modulated radiotherapy(IMRT) and volumetric modulated arc therapy(VMAT) using restricted angle for non-small cell lung cancer patients. Materials and Methods : The treatment plans for four patients, being treated on TrueBeam STx($Varian^{TM}$, USA) with 10 MV and prescribed dose of 60 Gy in 30 fractions, 3D CRT, restricted angle IMRT and VAMT radiotherapy plans were established. Planning target volume(PTV), dose to total lung and spinal cord were evaluated using the dose volume histogram(DVH). Conformity index(CI), homogeneity index(HI), Paddick's index(PCI) for the PTV, $V_{30}$, $V_{20}$, $V_{10}$, $V_5$, mean dose for total lung and maximum dose for spinal cord was assessed. Results : Average value of CI, HI and PCI for PTV was $0.944{\pm}0.009$, $1.106{\pm}0.027$, $1.084{\pm}0.016$ respectively. $V_{20}$ values from 3D CRT, IMRT and VMAT plans were 30.7%, 20.2% and 21.2% for the first patient, 33.0%, 29.2% and 31.5% for second patient, 51.3%, 34.3% and 36.9% for third patient, finally 56.9%, 33.7% and 40.0% for the last patient. It was noticed that the $V_{20}$ was lowest in the IMRT plan using restricted angle. Maximum dose for spinal cord was evaluated to lower than the tolerance dose. Conclusion : For non-small cell lung cancer, IMRT with restricted angle or VMAT could minimize the lung dose and lower the dose to spinal cord below the tolerance level. Considering PTV coverage and tolerance dose to spinal cord, it was possible to obtain IMRT plan with smaller angle and this could result in lower dose to lung when compared to VMAT.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.11-19
• /
• 2014

Purpose : To derive the most appropriate factors by considering the effects of the major factors when applied to the optimization algorithm, thereby aiding the effective designing of a ideal treatment plan. Materials and Methods : The eclipse treatment planning system(Eclipse 10.0, Varian, USA) was used in this study. The PBC (Pencil Beam Convolution) algorithm was used for dose calculation, and the DVO (Dose Volume Optimizer 10.0.28) Optimization algorithm was used for intensity modulated radiation therapy. The experimental group consists of patients receiving intensity modulated radiation therapy for the head and neck cancer and dose prescription to two planned target volume was 2.2 Gy and 2.0 Gy simultaneously. Treatment plan was done with inverse dose calculation methods utilizing 6 MV beam and 7 fields. The optimal algorithm parameter of the established plan was selected based on volume dose-priority(Constrain), dose fluence smooth value and the impact of the treatment plan was analyzed according to the variation of each factors. Volume dose-priority determines the reference conditions and the optimization process was carried out under the condition using same ratio, but different absolute values. We evaluated the surrounding normal organs of treatment volume according to the changing conditions of the absolute values of the volume dose-priority. Dose fluence smooth value was applied by simply changing the reference conditions (absolute value) and by changing the related volume dose-priority. The treatment plan was evaluated using Conformal Index, Paddick's Conformal Index, Homogeneity Index and the average dose of each organs. Results : When the volume dose-priority values were directly proportioned by changing the absolute values, the CI values were found to be different. However PCI was $1.299{\pm}0.006$ and HI was $1.095{\pm}0.004$ while D5%/D95% was $1.090{\pm}1.011$. The impact on the prescribed dose were similar. The average dose of parotid gland decreased to 67.4, 50.3, 51.2, 47.1 Gy when the absolute values of the volume dose-priority increased by 40,60,70,90. When the dose smooth strength from each treatment plan was increased, PCI value increased to $1.338{\pm}0.006$. Conclusion : The optimization algorithm was more influenced by the ratio of each condition than the absolute value of volume dose-priority. If the same ratio was maintained, similar treatment plan was established even if the absolute values were different. Volume dose-priority of the treatment volume should be more than 50% of the normal organ volume dose-priority in order to achieve a successful treatment plan. Dose fluence smooth value should increase or decrease proportional to the volume dose-priority. Volume dose-priority is not enough to satisfy the conditions when the absolute value are applied solely.

• Journal of Korean Clinical Nursing Research
• /
• v.23 no.1
• /
• pp.83-90
• /
• 2017

Purpose: This study was to develop evidence-based clinical practice guideline in order to prevent contrastinduced nephropathy (CIN) for patients undergoing percutaneous coronary intervention (PCI). Methods: The guideline was developed based on the "Scottish Intercollegiate Guidelines Network (SIGN)". The first draft of guideline was developed through 5 stages and evaluated by 10 experts.(1) Clinical questions were ensured in PICO format.(2) Two researchers conducted a systematic search through electronic database, identifying 170 studies. We selected 27 full text articles including 16 randomized clinical trials, 7 systematic reviews, and 4 guidelines. Quality of each studies were evaluated by the Cochran's Risk of Bias, AMSTAR, K-AGREEII. Among the studies, 11 studies were excluded.(3) The strength of recommendations were classified and quality of recommendations were ranked.(4) Guideline draft was finalized.(5) Content-validation was conducted by an expert group. All contents were ranked above 0.8 in CVI. Results: Evidence-based clinical practice guideline to prevent CIN was dveloped.(1) The guideline for preventing CIN recommends using 0.9% saline.(2) Standardized rate of fluid therapy is 1 to 1.5ml/kg/hr.(3) Execute hydration for 6~12hrs before PCI and after PCI. Conclusion: This study suggests evidence-based clinical practice guideline for preventing CIN which can be more efficiently used in clinical practice.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7A
• /
• pp.683-694
• /
• 2002

In this paper, a digital image compression codec using 2D DWT(Discrete Wavelet Transform) is designed using the FPGA technology for real time operation The implemented image compression codec using wavelet decomposition consists of a wavelet kernel part for wavelet filtering process, a quantizer/huffman coder for quantization and huffman encoding of wavelet coefficients, a memory controller for interface with external memories, a input interface to process image pixels from A/D converter, a output interface for reconstructing huffman codes, which has irregular bit size, into 32-bit data having regular size data, a memory-kernel buffer to arrage data for real time process, a PCI interface part, and some modules for setting timing between each modules. Since the memory mapping method which converts read process of column-direction into read process of the row-direction is used, the read process in the vertical-direction wavelet decomposition is very efficiently processed. Global operation of wavelet codec is synchronized with the field signal of A/D converter. The global hardware process pipeline operation as the unit of field and each field and each field operation is classified as decomposition levels of wavelet transform. The implemented hardware used FPGA hardware resource of 11119(45%) LAB and 28352(9％) ESB in FPGA device of APEX20KC EP20k600CB652-7 and mapped into one FPGA without additional external logic. Also it can process 33 frames(66 fields) per second, so real-time image compression is possible.