• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.7
• /
• pp.1346-1363
• /
• 1994

Packet voice protocols have been realized in many research works. But few studies for the interconnection of LAN and PABX to facilitate the voice communication have been done. In this paper, the gateway to interconnect the Ethernet LAN with the existing PABX telephone network for voice communication has been designed and implemented. The implemented gateway protocol is a modified protocol based on CCITT`s G.764 packetized voice protocol. To accomplish this goal the hardware system has been realized, which is divided into five parts: interface part with the telephone line, voice-processing part, PC interface part, controller part, and finally DTMF part. And the gateway software is divided into three parts: interface to make use of the packet driver which drives the network card, driver to drive the PABX gateway, and the protocol handling part.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.6
• /
• pp.316-323
• /
• 2004

This paper develops an ADWHM(Advanced Digital Watt-Hour Meter) which integrates and implements the voltage management data record function and the load management data record function in the electronic watt-hour meter. ADWHM is developed based on PIC16F874 which is 8bit micro-controller of RISK type for the easy of programing and maintenance, and electronic power signal processing module is located at front of it to reduce the computing load of processor. Also, a 16kbyte EEPROM is used to record the voltage management data and load management data for a week as well as watt-hour data and USART communication mode is used to transfer data from ADWHM to PC. The accuracy of the voltage and unt measuring for ADWHM is verified by identifying the LCD display values of the ADWHM after the voltage signals of id levels from digital function generator is applied to PT(Potential Transformer) and CT(Current Transformer) output under state which it is separated from real power line. On the its basic functions such as watt-hour data recording function, voltage management data recording function and load management data recording function was verified by showing data for three days among the collected data to PC by RS232C communication from ADWHM which was connected to real power lines for a week.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.9 no.4
• /
• pp.237-243
• /
• 2014

In this paper we present an real-time obstacle avoidance technique of autonomous mobile robot with steering system and implementation of user interface for mobile devices with Android platform. The direction of autonomous robot is determined by virtual force field concept, which is based on the distance information acquired from 5 ultrasonic sensors. It is converted to virtual repulsive force around the autonomous robot which is inversely proportional to the distance. The steering system with PD(proportional and derivative) controller moves the mobile robot to the determined target direction. We also use PSD(position sensitive detector) sensors to supplement ultrasonic sensors around dead angle area. The mobile robot communicates with Android mobile device and PC via Ethernet. The video information from CMOS camera mounted on the mobile robot is transmitted to Android mobile device and PC. And the user can control the mobile robot manually by transmitting commands on the user interface to it via Ethernet.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.109-115
• /
• 2004

Polishing process has been applied to get extremely fine surfaces, e.g., mirror surfaces such as optical mirrors, lens, molds and etc. Nowadays not only fine surface quality but also submicron order of dimensional accuracy is required for many applications. To meet the requirements polishing process should be provided with an active control of polishing pressure especially for automation of polishing process. In this paper a study on development of an active polishing pressure control system has been presented. A new type of tool assembly has been developed to facilitate the control. The tool is attached to an axis of a polishing machine with a coil spring and control of the polishing pressure is done by the position control of the axis, which needs no additional actuator. The polishing pressure is successfully measured by the measurement of the spring deformation. Control specifications were quantitatively considered by weighting functions and a controller was designed by using loop-shaping technique based on the no synthesis. Some experiments have been executed on a polishing machine with a PC-NC controller. It is shown that the results were coincident well with the theoretical analyses and satisfied the design specifications.

• International Journal of Ocean System Engineering
• /
• v.1 no.4
• /
• pp.192-197
• /
• 2011

This paper describes the mathematical modeling, control algorithm, system design, hardware implementation and experimental test of a Manta-type Unmanned Underwater Vehicle (MUUV). The vehicle has one thruster for longitudinal propulsion, one rudder for heading angle control and two elevators for depth control. It is equipped with a pressure sensor for measuring water depth and Doppler Velocity Log for measuring position and angle. The vehicle is controlled by an on-board PC, which runs with the Windows XP operating system. The dynamic model of 6DOF is derived including the hydrodynamic forces and moments acting on the vehicle, while the hydrodynamic coefficients related to the forces and moments are obtained from experiments or estimated numerically. We also utilized the values obtained from PMM (Planar Motion Mechanism) tests found in the previous publications for numerical simulations. Various controllers such as PID, Sliding mode, Fuzzy and $H{\infty}$ are designed for depth and heading angle control in order to compare the performance of each controller based on simulation. In addition, experimental tests are carried out in a towing tank for depth keeping and heading angle tracking.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.479-483
• /
• 1997

In general, motor parameters can be divided into mechanical/electrical parameters and harmonic parameters. Mechanical/electrical parameters identification of motor have been studying systematically for a long time. But, systematical study on harmonic parameters analysis for efficient motor drive system are very poor. The goal of this paper is to propose analyzing method of harmonic parameters for motor drive system with various experimental graphic screens and numerical results and to develope harmonic parameters analyzer. A developed analyzer is made up 586-PC and DSP (digital signal processor) board, motor drive system, power and harmonic parameters analyzing software for windows. Harmonic parameters are analyzed using correlation signal processing techniques based on the correlation between voltage and current waveforms. Analysis results are visualized by 3-D current coordinates, and it is compared and evaluated with conventional time/frequency domain. To verify the validity of the proposed system, 1/4HP capacitor run type single phase induction motor and thyristor speed controller is used for analyzing. Harmonic parameters of motor drive system is analyzed and verified, with varying fire angle of thyristor speed controller, and the proposed approach is to confirm validity.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.171-177
• /
• 2010

This paper presents the development of a new 6-DOF parallel-kinematic motion simulator. The moving platform is connected to the fixed base by six P-S-U (Prismatic-Spherical-Universal) serial chains. Comparing with the well-known Gough-Stewart platform-type motion simulator, it uses commercialized linear actuators mounted at the fixed base whereas a 6-UPS manipulator uses telescopic linear ones. Therefore, the proposed motion simulator has the advantages of easier fabrication and lower inertia over a 6-UPS counterpart. Furthermore, since most forces acting along the legs are transmitted to the structure of linear actuators, smaller actuation forces are required. The inverse position and Jacobian matrix are analyzed. In order to further increase workspace, inclined arrangement of universal joints is introduced. The optimal design considering workspace and force transmission capability has been performed. The prototype motion simulator and PC-based real-time controller have been developed. Finally, position control experiment on the prototype has been performed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.1
• /
• pp.113-122
• /
• 1998

This paper presents an implementation method of Profibus interface software using FMS(Fieldbus Message Specification). The Profibus interface software is implemented on PC which is widely used as an industrial computer as well as a commercial embedded controller called IUC(Intelligent Universal Controller). In order to enable the Profibus interface software to handle many application tasks and communication services, two kinds of real-time/multi-tasking operating system, OS-9 and CTask, are utilized. We also develop an experimental model of Profibus-based automation system, and evaluate the performance of the Profibus network. Through experiments, the user layer level message latency is measured with respect to the change of message length, message generation interval and TRT(Target Rotation Time). The results of experiment are compared with those of a simulation model which comprises only the physical and data link layers of Profibus. The results of this study shows that the message latency in the user layer level occupies fairly a large part of the total message latency.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.57-62
• /
• 2014

Recently, research activities to develop services for providing safety information to the drivers in fast moving vehicles based on various wireless network technologies such as DSRC (Dedicated Short Range Communication), IEEE 802.11p WAVE (Wireless Access for Vehicular Environment) are widely being carried out. This paper presents a proof-of-concept model based on a robot-car for Dilemma Zone Decision Assistant Service using the wireless LAN technology. The proposed model system consists of a robot-car based on an embedded Linux OS equipped with a WiFi interface and an on-board unit emulator, an Android-based remote controller to model a human driver interface, a laptop computer to run a model traffic signal controller and signal lights, and a WiFi access point to model a road-side unit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.4
• /
• pp.315-324
• /
• 2005

VOD(video on demand) is a video service by users' order, that is, a video service on demand. That means the users can select and watch the video content that has been saved on sewer, out of broadcasting in the usual process like TV. At present the client of VOD system bases on PC. As the PC-based client uses the software MPEG decoder, the main processor specification has an effect on the capacity. Also people, who don't know how to use their PC, cannot be provided the VOD service. The purpose of this paper is to show the process of the development the VOD client system Into the embedded type with hardware MPEG-4 decoder. The main processor is the SC1200 of x86 Family in National Semiconductor with a built-in video processor and the memory is 128Mbyte SDRAM. Also, in order that the VOD service can be provided using the Internet, the Ethernet controller is included. As the hardware MPEG-4 decoder is used in the embedded VOD client system, which is developed, it can make the low capacity of the main processor. Therefore it is able to be developed as a low-price system. The embedded VOD client system is easy for anyone to control easily with the remote control and can be played through TV.