• 한국정밀공학회지
• /
• 제16권11호
• /
• pp.197-203
• /
• 1999

Increasing demands on precision machining have necessitated the tool to move not only position error as small as possible, but also with smoothly varying feedrates. Because of the lack of accurate and efficient algorithms for generation of 3-dimensional lines and circles, a full accomlishment for available machine tool resolution is generally unavailable. In this paper, a reference-pulse type 3-axis PC_NC milling system is developed for the precision machining of complex shapes in 3-dimensional space. Three AC servomotors are used as the actuator instead of the hand wheel to operate a 3-axis milling machine under the same mechanical structure. A PC is used to handle the control signal calculation for various types of motion command. To achieve the synchronous 3-axis motion, a real-time reference-pulse 3-dimensional linear and circular interpolator based on the intersection criteria is developed in software. The performance test via computer simulation and actual machining have shown that the PC-NC milling system is useful for the machining of arbitrary lines and circles in 3-dimensional space.

• 한국융합학회논문지
• /
• 제7권1호
• /
• pp.17-23
• /
• 2016

본 논문에서는 제조업체의 공장자동화 환경을 클라우드 컴퓨팅의 SaaS 구축기술을 활용하여 전용 NC포스트프로세서를 웹 환경에서 서비스 받을 수 있도록 융합기술을 적용한 사례를 기술하였다. 개발된 WPS시스템은 기존 소프트웨어 개발방법론인 SPLE을 보완한 SCoD 방법론을 활용하여 안정되고 지속적인 시스템 서비스를 제공하도록 구현하였다. WPS는 범용의 NC포스트프로세서를 사용자 인터페이스와 프로세서 엔진으로 분리하여 각각의 사용자 PC와 클라우드 팜에 설치하고, 이 두 모듈을 네트워크로 연결하는 구조로 설계하였다. WPS는 철판절단 및 금형생산 공정 등에 활용할 수 있도록 현업에서 기능상의 테스트를 완료하였고, 사용자의 편의성을 개선하고 과금을 위한 모듈을 추가하는 등의 보완 작업을 거쳐 상용 서비스를 진행 중에 있다.

• 한국임상수의학회지
• /
• 제30권6호
• /
• pp.459-463
• /
• 2013

본 연구는 Lactobacillus plantarum (L. plantarum)과 Bacillus subtilis (B. subtilis)의 합제 (LB)를 이유자돈에 경구 투여하여, 면역반응, 설사발생 그리고 분변 중 균수변화 등에 미치는 효과를 평가하기 위해 수행하였다. 28일령의 이유자돈 100두를 대상으로 군 당 20두씩 5개 군 (NC, 항생제와 LB 무투여; PC, 0.03% chlortetracycline 투여; LB 1, LB 0.5 kg/ton feed; LB 2, LB 1.0 kg/ton feed; LB 3, LB 2.0 kg/ton feed)으로 나누어, 4주 동안 LB를 투여하면서, 1주일 간격으로 분변지수를 산출하여 군별로 기록하였으며, 투여 종료 후, 혈액 및 분변을 채취하여, 혈액시료로부터 IgG와 IFN-${\gamma}$를 분석하였고, 분변시료로부터 lactic acid bacteria (LAB)와 Enterobacteriaceae (ENT)의 수를 확인하였다. LB 투약 2주째부터, LB 2와 LB 3의 설사지수는 NC에 비해 통계적으로 유의성 있게 감소하였으며 (P<0.05), IgG와 IFN-${\gamma}$의 농도도 NC에 비해 통계적으로 유의성 있게 증가하였다(P<0.05). 또한, LB 2와 LB 3의 LAB와 ENT 수는 NC과 PC에 비해 통계적으로 유의성 있게 변화하는 결과를 나타내었다(P<0.05). 이상의 결과로부터, LB는 강력한 항생제 대체제로서 자돈 설사예방에 사용될 수 있을 것으로 사료된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권3호
• /
• pp.374-378
• /
• 2004

One hundred and twenty crossbred pigs [(Duroc$\times$Yorkshire)$\times$Landrace] were used to determine the effects of plant extract (PE) supplementation on performance and blood characteristics in weaned pigs fed a corn-dried whey-SBM based diet. Treatments were 1) NC (antibiotic free basal diet), 2) PC (NC diet+100 ppm apramycin and 100 ppm oxytetracycline), 3) PE 0.1 (NC diet+0.1% plant extract), 4) PE 0.2 (NC diet+0.2% plant extract) and 5) PE+AB (PC diet+0.1% plant extract). Through the entire experimental period, ADG of pigs fed PC (300 vs. 281 g/d), PE 0.2 (310 vs. 281 g/d) and PE+AB (306 vs. 281 g/d) diets was higher than that of pigs fed NC diet (p<0.05). However, no differences were found among the treatments for ADFI and gain/feed. At day 2 after the onset of the experiment, fecal consistency score of pigs fed PC, PE 0.1, PE 0.2 and PE+AB diets was lower than that of pigs fed NC diet. There were no significant differences in red blood cell, white blood cell, lymphocytes, neutrophils and monocytes concentrations of blood among the treatments. In conclusion, PE can be used to replace antibiotics in diets for weaned pigs without negative affects on performance. Optimal PE levels seemed to be 0.2% and the results obtained point out to a synergic effect of the combination of PE and antibiotic on performance in weaned pigs.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.143-151
• /
• 2004

This paper deals with the precision NURBS interpolator for wire-EDM. Previous research about OAC (Open Architecture Controller) is mostly aimed at NC cutting machines such as milling or lathes, and hence these results are inadequate to apply to wire-EDM. In contradiction to NC machines, wire-EDM operates relatively slow feed rates and based on a feedback control loop to the machining process. The 2-stage interpolation method which reflects wire-EDM specific characteristics was proposed. The constant interpolation error could be acquired through 1 st stage interpolation. Feed rate regulation was performed through 2nd stage interpolation. The suggested algorithm was implemented to test-bed PC-NC system. Computer simulations and the experimental machining were conducted.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.971-974
• /
• 1988

In this study, we designed a model of NC controller with IBM-PC as a host CPU and intelligent servo controller for 2 axes that can be expaned to 4 axes. OS software was developed with C language at the base of mode selection technic for 9 NC operating modes. Servo controller design was based on the application of interpolator IC(3701) and position controller IC(3702) that permits low cost and high performance. For connection of two systems, parallel I/O communication was implemented. Finally, auto interpolation program test was executed for linear and circular paths resulting 1 LSB accuracy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.423-427
• /
• 1993

An efficient 3-axis NC milling simulator is presented. The geometric simulation of milling is based on z-map structure and voxels. For the graphic simulation,dimetric projection is adopted. As a result, two faces of a voxel are exposed and they are overlapped. Visible faces are determined by using z-butter method. The simulation system is developed in IBM-PC compatible with satisfactory result.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.641-644
• /
• 2000

Recently As the performance of the personal computer has been improving rapidly lots of research for the pc-based numerical computer actively progress in an easy repair maintenance and improving the performance with less cost. This paper presents the design using complex programmable logic device(CPLD). The CPU of Motion Controller that function as the real time control of the independent multi-axis motion the error-detect module and external I/O control made use of 80C196KC, In this paper The PC-NC effectively distributed to the load of NCK(numerical computer kernel) and have the advantage of high speed and precision.

• 농업과학연구
• /
• 제45권3호
• /
• pp.475-484
• /
• 2018

Nitrite is an essential additive for the manufacture of cured meat products. This study was conducted to investigate the curing effect of the plasma treated juice of red Perilla in meat batter. The nitrite content in the juice of red Perilla was increased by the indirect treatment of atmospheric pressure plasma, and the lyophilized powder of red Perilla juice contained 9,133 ppm of nitrite. A meat batter without a nitrite source was prepared as a negative control (NC), and the meat batters cured with sodium nitrite (PC), celery powder (CP), and the lyophilized powder of red Perilla juice treated with atmospheric pressure plasma (PTP) at 70 ppm level of nitrite were prepared. The PTP showed the highest pH and the lowest cooking loss among the treatments. There were no significant differences in the nitrosyl-hemochrome content in the cooked meat batters of the PC, CP and PTC. However, the PTP had a lower CIE $a^*$-value compared to the PC and CP. The malondialdehyde content in the cooked meat batters was significantly lower in the CP and PTP than in the NC while there was no significant difference between the NC and PC. Based on the results of this study, the plasma treated juice of red Perilla can be used as a new natural nitrite source for cured meat products.

• 한국정밀공학회지
• /
• 제18권3호
• /
• pp.53-60
• /
• 2001

Water jet cutting is a new technology using very high pressure water as a cutting tool. Water jet cutting system consists of water preparation part, pressure generation pate, cutting head, and motion part. A PC-based numerical controlled (PC-NC) X-Y table is developed and water get cutting system is installed thereon. Water jet machining is applicable to various kinds of materials ranging from soft materials such as rubber and meat to hard-to-cut materials such as titanium. This paper shows the application of the abrasive waterjet system to titanium cutting.