• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.15-19
• /
• 2008

The use of Precast Concrete (PC) stairways is increasing to replace existing Reinforced Concrete (RC) stairways for the faster construction and the better quality control. Among several already developed PC stairway construction methods, RC Core Sequential Construction Method by Using PC Stairways (COSEC) has advantages of 1) allowing core of a building to be built prior to PC stairways so that two different procedures will not interfere with each other, and 2) having a newly developed joint connection with the core so that the RC core and PC stairways can be easily put together. In this paper, cases of several construction sites with the PC stairways method are analyzed. The elements of the developed method are described for further application and improvement.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권6호
• /
• pp.105-112
• /
• 2019

본 논문은 비내진 상세를 갖는 철근콘크리트 골조 및 필로티 건물의 보강방법으로 높은 연성을 갖는 ECC를 적용한 PC 벽판을 내진 보강요소로 사용하고자 하였다. PC 벽판의 형상비 및 설치 위치를 변수로 RC 골조에 대한 반복가력실험을 실시하여 내진성능을 평가하였다. 실험결과 PC 벽판을 보강함에 따라 기존 RC 골조의 내력 증진, 강도저하 방지, 강성증진 및 에너지 소산능력 향상에 효과적인 것으로 나타났다. 실험결과를 근거로 비내진 상세를 갖는 골조의 강도 증진을 위하여 ECC PC 벽판을 골조의 중앙에 설치하고 연성증진을 위하여 세장한 벽판을 골조의 양측면에서 설치할 것을 제안한다.

• 한국건설관리학회논문집
• /
• 제23권6호
• /
• pp.30-42
• /
• 2022

OSC는 기획, 설계, 시공, 유지보수 등의 건설생산 전 과정에 걸친 공급망과 가치사슬의 한 유형으로 건설현장이 아닌 공장 등 제 3의 장소에서 제작한 후 현장으로 운반하여 설치 및 시공하므로써 최종 목적물을 생산하는 방식이다. 본 연구에서는 PC공법 및 RC공법을 적용한 공동주택 사례를 각각 1개에 대하여 공사비를 비교하였다. PC공법 적용(PC설계비 제외)의 경우 RC공법만 적용하는 경우에 비해 골조 단위물량(m³)당 골조공사비가 약 70% 내외로 증가(RC 공종 합계 기준 50%)함을 도출하였다. PC공법 적용 사례 전체 골조 공사비 중 PC비중이 90.2%로 'PC제작비'가 54.8%, 'PC조립' 28.5%, '운반'이 6.89%를 차지하여, PC제작 및 조립 부문에서 비용 절감 노력이 필요할 것으로 판단하였다. 또한, 비용과 편익을 함께 고려할 수 있는 의사결정 프레임워크 초안을 구축하였다. 편익의 경우 OSC 기술적 장점이 반영된 공사기간, 하자보수, 재해발생, 에너지효율, 소음/분진/폐기물, 온실가스 배출 지표를 제시하였다. OSC기반 PC 공동주택 도입 의사결정을 지원하기 위한 적용 효과 근거를 마련하는데 기여할 수 있을 것으로 판단된다.

• 한국공간구조학회논문집
• /
• 제19권4호
• /
• pp.77-84
• /
• 2019

This study introduces a newly developed PC non-bearing wall system to prevent the damage of RC wall-type apartments that have been heavily damaged by the 2017 Pohang Earthquake. In order to evaluate the performance of the developed PC non-bearing wall system, a static cyclic test is conducted. The prototype of test specimen is from the RC wall-type apartment which has been severely damaged by the 2017 Pohang Earthquake. The specimen with the conventional non-bearing wall system showed the similar damage of RC wall type apartment suffered from the Pohang Earthquake. In case of the specimen with the developed PC non-bearing wall system, cracks and damages were not transmitted between the walls due to the seismic slit and there were almost no cracks in the non-bearing walls. Therefore, the proposed non-bearing wall system, separated from the structural walls, could prevent spreading cracks to bearing walls and make it possible to effectively control damage due to earthquake loads.

• 한국건축시공학회지
• /
• 제10권6호
• /
• pp.127-135
• /
• 2010

물류시설은 층고가 높고 구조가 단순하며, 투자회수를 위한 조속한 운영이 필요하기 때문에 공기단축이 절실한 특징이 있다. 이에 따라 인력 및 원가절감, 공기단축을 기대할 수 있는 PC공법의 사용은 RC조에 비해 경쟁력을 확보할 수 있다. 그러나 국내의 시공사들은 RC공법에 익숙해져 있어, PC공법에 대한 부정적 인식이 팽배하며, 새로운 공법적용에 대한 노력이 미흡한 문제점이 있다. 본 연구의 사례현장은 단위기둥의 높이가 14m로 동일한 규격의 장주(長柱)가 110본 소요되는 현장으로 RC공법을 이용할 경우 시공성, 경제성, 공사기간, 안전성등의 문제발생이 예상된다. 따라서 본 연구는 RC조로 계획된 물류창고 현장을 PC공법으로 시공하여 인력 및 원가절감, 공기단축효과를 비교분석하고, 개선효과를 제시하는데 목적을 두고 있다. 향후 본 연구의 결과물은 물류시설 시공 시공기단축, 품질 및 시공성 향상, 안전성향상, 원가절감효과를 가져올 신공법개발 연구의 기초자료로 사용될 것으로 사료된다.

• Interaction and multiscale mechanics
• /
• 제2권1호
• /
• pp.69-89
• /
• 2009

Reinforced and prestressed concrete (RC and PC) thin walls are crucial to the safety and serviceability of structures subjected to shear. The shear strengths of elements in walls depend strongly on the softening of concrete struts in the principal compression direction due to the principal tension in the perpendicular direction. The past three decades have seen a rapid development of knowledge in shear of reinforced concrete structures. Various rational models have been proposed that are based on the smeared-crack concept and can satisfy Navier's three principles of mechanics of materials (i.e., stress equilibrium, strain compatibility and constitutive laws). The Cyclic Softened Membrane Model (CSMM) is one such rational model developed at the University of Houston, which is being efficiently used to predict the behavior of RC/PC structures critical in shear. CSMM for RC has already been implemented into finite element framework of OpenSees (Fenves 2005) to come up with a finite element program called Simulation of Reinforced Concrete Structures (SRCS) (Zhong 2005, Mo et al. 2008). CSMM for PC is being currently implemented into SRCS to make the program applicable to reinforced as well as prestressed concrete. The generalized program is called Simulation of Concrete Structures (SCS). In this paper, the CSMM for RC/PC in material scale is first introduced. Basically, the constitutive relationships of the materials, including uniaxial constitutive relationship of concrete, uniaxial constitutive relationships of reinforcements embedded in concrete and constitutive relationship of concrete in shear, are determined by testing RC/PC full-scale panels in a Universal Panel Tester available at the University of Houston. The formulation in element scale is then derived, including equilibrium and compatibility equations, relationship between biaxial strains and uniaxial strains, material stiffness matrix and RC plane stress element. Finally the formulated results with RC/PC plane stress elements are implemented in structure scale into a finite element program based on the framework of OpenSees to predict the structural behavior of RC/PC thin-walled structures subjected to earthquake-type loading. The accuracy of the multiscale modeling technique is validated by comparing the simulated responses of RC shear walls subjected to reversed cyclic loading and shake table excitations with test data. The response of a post tensioned precast column under reversed cyclic loads has also been simulated to check the accuracy of SCS which is currently under development. This multiscale modeling technique greatly improves the simulation capability of RC thin-walled structures available to researchers and engineers.

• 콘크리트학회논문집
• /
• 제26권1호
• /
• pp.35-46
• /
• 2014

중량 PC기둥의 양중부하를 저감하고 접합부 구조일체성을 개선하기 위하여, 두 가지 형태의 현장타설 콘크리트 채움 중공 PC기둥(HPC1, HPC2)을 개발하였다. 중공의 PC단면을 구현하기 위해, HPC1은 조립철근망이 설치된 선제작 PC패널 한 쌍을 활용하였으며, HPC2는 특별한 띠철근을 활용하였다. 심부콘크리트 타설시 측압을 측정하였으며, 내진성능을 평가하기 위하여 실물크기의 HPC1, HPC2 기둥과 비교용 RC 기둥에 대하여 일정축력하 주기횡하중실험을 수행하였다. 실험 결과 HPC 실험체는 초기강성, 최대강도, 변위연성도 등 구조성능면에서 RC 실험체와 유사한 거동을 보였으며, 다만 단면을 관통하는 내부띠철근이 없는 HPC2의 경우에는 주철근의 좌굴이 발생한 이후 에너지소산능력이 다소 떨어졌다. 하지만 세 실험체 모두 ACI 374에서 요구하는 에너지소산능력을 만족하였다.

• Advances in concrete construction
• /
• 제10권4호
• /
• pp.319-332
• /
• 2020

The impacts of reinforcing concrete matrix with steel fibers, polypropylene fibers and recycled plastic fibers using different volume fractions of 0.15%, 0.5%, 1.5% and 2.5% on the compressive and tensile characteristics are experimentally investigated in the current research. Also, flexural behavior of plain concrete (PC) beams, shear performance of reinforced concrete (RC) beams and compressive characteristics of both PC and RC columns reinforced with recycled plastic fibers were studied. The experimental results showed that the steel fibers improved the splitting tensile strength of concrete higher than both the polypropylene fibers and recycled plastic fibers. The end-hooked steel fibers had a positive effect on the compressive strength of concrete while, the polypropylene fibers, the recycled plastic fibers and the rounded steel fibers had a negative impact. Compressive strength of end-hooked steel fiber specimen with volume fraction of 2.5% exhibited the highest value among all tested samples of 32.48 MPa, 21.83% higher than the control specimen. The ultimate load, stiffness, ductility and failure patterns of PC and RC beams in addition to PC and RC columns strengthened with recycled plastic fibers enhanced remarkably compared to non-strengthened elements. The maximum ultimate load and stiffness of RC column reinforced with recycled plastic fibers with 1.5% volume fraction improved by 21 and 15%, respectively compared to non-reinforced RC column.

• 한국공간구조학회논문집
• /
• 제21권4호
• /
• pp.65-72
• /
• 2021

The Precast concrete(PC) modular structures are a method of assembling pre-fabricated unit modules in the construction site. The essential aim of modular structures is to introduce a connection method that can ensure splicing performance and effectively resist shear strength. This study proposed PC module using a connecting plate that can replace splice sleeves and shear keys used in the conventional PC modular structures. To evaluate the splicing performance and shear capacity of the proposed method, the shear test was conducted by fabricating one monolithic reinforced concrete(RC) beam and two PC modular beams with a shear span-to-depth ratio as variables. The experimental results showed that the shear capacity of the PC modular beam was about 89% compared to that of the RC beam, and showed a failure of the RC beam according to the shear span-to-depth ratio. Therefore, it was considered that the connecting plate effectively transferred the stress between each PC module through the joint and ensure integrity. In addition, the applicability of shear strength equation of ACI 318-19 and Zsutty's equation to PC modular beams were evaluated. Results demonstrated that the improved shear strength equations are needed to consider reduction of shear strength in PC modules.

• 한국주거학회논문집
• /
• 제26권2호
• /
• pp.103-110
• /
• 2015

Precast Concrete (PC) construction method can be the one that is suitable for long-life housing due to its merit in respect of maintenance and durability based on crack-free from mass production with indirect construction cost-saving-effect due to shortening construction period comparing to the conventional construction method, but it has the problem that causes the raise of direction construction costs. So, this study analyzed its economic feasibility of PC method whose maintenance and durability are excellent for underground parking lot of apartment house for accomplishing cost-saving long-life housing by applying the various structural system. In evaluation of unit module structural system, two-way PC system requires 10 to 28% more costs for frame work than RC rigid frames, and, one-way PC system 98~112%. Although it varies depending on the method, the costs are similar to RC rigid frame structure, provided a proper method is adopted. Also, Model 11, which was most economical in the evaluation, was applied to an real parking lot and about 2 to 6% of construction costs was reduced than RC rigid frames. This seems to be because, although PC system has a higher production cost, introduction of P.S (prestress) reduces member depth and, therefore, height, as well as the number of members per unit module.