• Journal of the Korea Construction Safety Engineering Association
• /
• s.25
• /
• pp.102-106
• /
• 1997

건교부는 P.C 빔 전도사고 근절대책을 마련, 각 발주기관에 통보하여 건설현장에서 이를 철저히 준수토록 했다. 또한 앞으로는 정기점검 및 각종 점검시에 PC 빔 전도사고 근절대책의 이행여부를 함께 점검할 예정이라고 덧붙였다.

• Journal of Satellite, Information and Communications
• /
• v.7 no.2
• /
• pp.25-29
• /
• 2012

In this paper, we implemented LED beam forming communication system controlled by stepping motor. ATMega1284 was used as a MCU of main control board which has two main external IO, one is RS232 for connection with PC, the other is PORT for connection with motor driving board. Stepping motor rotated 360 degree when provided 160 clock and its rotation radius was increased by Archimedian Spiral. So LED can provide its light anywhere in the space and its beam forming was controlled by PC connected with RS232 of main control board. The action of beam forming was verified via actual HW/SW implementation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.269-270
• /
• 2006

이온빔 스퍼터를 사용하여 PC기판위에 $TiO_2$ 박막을 증착한 후 광학적 특성을 고찰하였다. 증착 전 어시스트 이온건을 사용하여 아르곤 플라즈마로 표면처리를 하였으며, Ti 박막을 $300{\AA}$정도로 증착한 다음, 그 위에 산소 반응스퍼터링 기법을 사용함으로써 $TiO_2$박막을 증착하였다. 표면처리에 의한 기판의 표면개질로 TI 버퍼층과의 막부착력을 높이고, 아르곤 산소의 분압비를 1로 고정하였을 때, $TiO_2$박막의 두께에 따라서 박막의 색상이 변화는 것을 관찰할 수 있었다. 또한, 아르곤과 산소의 분압 변화에 대한 의존성은 $TiO_2$박막의 색상과 투과율과 같은 광학적인 성질에 영향을 미치는 것을 알 수 있었다.

• The Korean Journal of Applied Statistics
• /
• v.27 no.4
• /
• pp.543-552
• /
• 2014

High bandwidth RF such as Bluetooth, GPRS, EDGE, 3GSM, HSDPA is papular in the mobile phone market. A non-conducting metal coating process requires an e-beam deposition of metal, two steps of UV hard coating primer and top coating; however, it is inefficient. We navigate to the electron beam irradiation conditions(resin surface treatment conditions) in the PC/ABS resin injection process. By analyzing the experimental results, we find the optimum development conditions for the electro deposition pre-treatment process and mass production lines using the plasma generated electron beam source.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.69-76
• /
• 2007

The main stream of presentation is interrupted because of the direct manipulation of their PC frequently so as to control the screen and file open and so on. A variety of products have been developed to solve these inconveniences of the conventional laser beam pointer [LBP] by simply adding a mouse function to the previous LBP. However. the LBPs fully supporting a mouse function are not yet appeared. In this paper. we developed the LBP fully fulfilling a mouse function using mono-camera as well as a robust image processing and analyzed the position detection accuracy. Finally we verified the developed LBP does not only fulfill a mouse function but also solve the defects of the current laser pointer such as inconvenient installation and Position detection errors due to the illumination and viewing direction changes.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.398-405
• /
• 1997

The finite element program is presented for the analysis of the moment distribution in continuous slabs of simply supported girders. The program includes the material nonlinearity of the continuous and steel reinforcements of the RC slabs, but assumes that the PC beam and cross beam behave linearly. In modeling the PC slabs and girders, the four node degenerated shell element formulated based on the assumed strain interpolation and the 3D beam element are used, respectively. Using the program, the influence of the existence of the cross bean, the filling of open joints on the continuous at supports, and perfect continuation of precast girder elements are examined.

• Progress in Medical Physics
• /
• v.8 no.1
• /
• pp.17-24
• /
• 1997

We developed PC-based planning system for linear accelerator based stereotactic radiosurgery. The system was developed under Windows 95 on Pentium Pro$\^$(R) 200 ㎒ IBM PC with 128 MB RAM. It was programed using IDL$\^$(R)/ of Research Systems, Inc. as a programing tool. CT image data obtained with BRW stereotactic frame is transferred to PC through magnetoptical disk. As loading the image, the system automatically recognizes the location of rods and establishes stereotactic coordinates. It accurately calculates and corrects the coordinates, degree of tilting, and magnification rate of axial images. After the coordinates is defined we can delineate and edit the contours of target and organs of interest on axial images. Upon delineating contours of target, isocenter is determined automatically and we can set up the beam configuration for radiosurgery. The system provides beam's eye view and room's eye view for efficient confuguring of beams. The system calculates dose distribution 3-dimensionally. It takes 1 to 2 minutes to calculate dose distribution for 5 arcs. We can verify the dose distribution on serial axial images. We can analyze the dose distribution quantitatively by evaluation of dose-volume histogram of target and organ of interest. This system, PC-based radiosurgery planning system, includes the basic features for radiosurgery planning and calculates dose distribution within reasonable time for clinical application.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1138-1141
• /
• 2004

고분자 재료에 이온을 주입하면 표면전기저항이 이온주입조건에 따라 $10^{16}\Omega/sq$ 에서 $10^7\Omega/sq$ 까지 변하게 되며, 광학적 특성도 변하게 된다. 이는 산업적으로 대전방지 등에 적용이 가능하며 이러한 신소재 개발을 위하여 산업용 이온빔 표면처리 장치를 제작하고 인출광학을 기초로 이온빔을 제어하여 고분자 재료의 이온주입처리 양산기술을 개발하였다. 본 연구에서는 대면적, 대전류 이온빔 인출을 위한 이온원의 광학적 설계 및 빔라인에서의 솔레노이드 전자석을 이용한 빔프로파일 제어방법을 설명하였다. 사용된 고분자 소재는 PC(PolyCarbonate) 및 PET(PolyEthylene Teraphthalate)이며, 질소이온주입조건은 이온에너지 40-50 keV, 이온주입량 $5\times10^{15}$, $1\times10^{16}$, $7\times10^{16}ions/cm^2$의 조건으로 공정을 수행하였다. 또한 대전방지용 고분자 대량생산을 위한 연속 생산조건과 양산공정조건에 따른 표면전기저항변화를 관찰하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.1061-1070
• /
• 2002

In this paper, we present a performance analysis of the smart antenna test-bed operating in a IS2000 1x through a test-bed that has been implemented on a DSP(TMS320C6711) board. The test-bed consists of a PC (for generating the RX data), beam-former(i.e., a stand-alone PCB for weight computation), and an interfacing module. The performance improvements compared to a normal base station system consisting of a single antenna are shown in terms the BER(bit error rate) in the wide-band CDMA channel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.523-533
• /
• 2000

In this paper, we present the hardware implementation of a smart antenna test-bed for a real -time performance analysis of the beam-forming algorithm operating in a wide-band CDMA environments of the WLL(Wireless Local Loop) standard. The test-bed introduced in this paper includes an external PC and signal generating module as well as the beam-forming module in order to perform, analyze, and evaluate the performance of the proposed smart antenna system. In the beam-forming module, the optimal weight vector is provided by the modified CGM algorithm. The computed weight vector is transferred back to the external PC for the performance analysis based on the off-line processing. From our analysis obtained in the hardware of the test-bed, it is concluded that the proposed smart antenna system for the WLL system is appropriate for enhancing the communication quality and capacity tremendously at the cell-site of the CDMA environment.