• 한국산학기술학회논문지
• /
• 제19권9호
• /
• pp.13-19
• /
• 2018

MWCNT (다중벽 탄소 나노튜브)의 종류와 유동 형태가 폴리카보네이트 (PC)/MWCNT 나노 복합체의 전기 전도도에 미치는 영향을 관찰하였다. MWCNT의 종류가 바뀌면 사출 성형으로 제조된 PC/MWCNT의 전기 전도도가 크게 변하는 것을 관찰하였다. MWCNT 의 종횡비가 클수록 사출 성형품의 전기 전도도는 낮았고 압축 성형으로 제조한 시료의 전기 전도도는 MWCNT의 종류에 상관없이 비슷하였다. 이 결과는 MWCNT의 변형과 크게 상관있는 것으로 조사되었다. 종횡비가 클수록 외부 응력이 작용할 때 MWCNT의 배향도가 올라가고 MWCNT들의 접촉에 의한 전도성 길 (path)가 끊어져서 전기전도도가 낮아지는 것으로 생각된다. 연신력과 전단 속도가 큰 조건에서 제조된 시료의 전기 전도도가 크게 낮아지는 것을 관찰하였다. 이는 높은 전단력과 연신력에서 MWCNT의 배향이 높아지고 그 결과 MWCNT 들의 접촉이 단절되면서 전기 전도도가 낮아지는 것임을 다양한 실험으로 부터 알 수 있었다. 여러 실험 결과 들을 MWCNT의 배향과 전도길 변화와의 연관성의 관점으로 토의하였다.

• 대한한방내과학회지
• /
• 제27권3호
• /
• pp.698-705
• /
• 2006

Objectives : This study was designed to investigate the effect of PC6 and SP4 on autonomic nerve system in healthy adults. Methods : 22 healthy adults were recruited and randomized into the study group or control group. The study group (real acupuncture group) was acupuncturcd on PC6 and SP4. The control group (sham acupuncture group) was acupunctured superficially near PC6 and SP4 but not the exact points. The subjects rested for 10 minutes, and were then acupunctured. After 15 minutes, acupuncture needles were removed and the subjects rested for another 15 minutes. Heart rate variability(HRV) was continuously measured during the study period by FM-150 (digital Holter ECG recorder). Results : In the real acupuncture group. LF(low frequency) significantly decreased during the acupuncture period(p<0.05). LF/HF ratio also had a significant decrease during acupuncture period and the decrease was maintained during the post-treatment period as compared with the pre-treatment period. In the sham acupuncture group. LF significantly increased during the acupuncture period but LF/HF ratio had no significant changes. Conclusions : The results suggest that acupuncture on PC6 and SP4 can increase parasympathetic activity and balance autonomic nervous system.

• 미생물학회지
• /
• 제45권2호
• /
• pp.91-98
• /
• 2009

닭의 전염성 F낭병 바이러스(IBDV)가 원인 바이러스인 전염성 F낭병은 전 세계 양계산업에 경제적으로 피해가 큰 중요한 질병이다. 이 연구의 목적은 닭에서 IBDV에 대한 방어면역을 유도하기 위한 in ovo 초회항원자극(priming)과 불활화백신에 의한 보강접종 방법에 항원보강제(adjuvant)로 chicken interleukin 6 (pcDNA-ChIL-6;plasmid encoding chicken interleukin-6)와 levamisole (LMS)의 효과를 조사하는 것이다. IBDV의 VP2, VP, VP3 protein을 암호화하는 유전자백신인 plasmid DNA vaccine (pcDNA-VP243) 단독 또는 pcDNA-ChIL-6 또는 LMS와 함께 18일령 부화란의 양막낭(amniotic sac)에 접종하고 부화한 1주령의 병아리에 불활화 IBD 백신을 근육 접종한 다음 3주령에 고병원성 IBDV인 SH/92 주로 공격 접종하고 10일 동안 관찰하였다. 백신하지 않은 공격접종 대조군이 100%의 폐사율을 보인 반면 pcDNA-VP243 단독 접종군과 pcDNA-VP243에 pcDNA-ChIL-6 또는 LMS를 첨가한 실험군은 모두 100%의 생존율을 나타내었다. 그러나 공격접종 후 F낭의 손상을 평가하기 위한 IBDV RNA의 검출, B/B ratio와 F낭의 병변지수(lesion score) 등을 분석한 결과 pcDNA-VP243에 pcDNA-ChIL-6 또는 LMS를 첨가한 실험군은 pcDNA-VP243 단독 접종군보다 향상된 방어효과를 나타내지 않았다. 이 실험결과는 유전자백신에 의한 in ovo 초회항원자극-불활화백신에 의한 보강접종법이 고병원성 IBDV로부터 닭을 보호하기 위한 효과적인 방법이었으나 pcDNA-ChIL-6 또는 LMS의 첨가로 인한 방어효과의 향상은 나타나지 않았다.

• International Journal of Oral Biology
• /
• 제45권4호
• /
• pp.179-189
• /
• 2020

Green tea polyphenol (-)-epigallocatechin-3-gallate (EGCG) is a potent antioxidant with protective effects against neurotoxicity. However, it is currently unclear whether EGCG protects neuronal cells against radiation-induced damage. Therefore, the objective of this study was to investigate the effects of EGCG on ultraviolet (UV)-induced oxidative stress and apoptosis in PC12 cells. The effects of UV irradiation included apoptotic cell death, which was associated with DNA fragmentation, reactive oxygen species (ROS) production, enhanced caspase-3 and caspase-9 activity, and poly (ADP-ribose) polymerase cleavage. UV irradiation also increased the Bax/Bcl-2 ratio and mitochondrial pathway-associated cytochrome c expression. However, pretreatment with EGCG before UV exposure markedly decreased UV-induced DNA fragmentation and ROS production. Furthermore, the UV irradiation-induced increase in Bax/Bcl-2 ratio, cytochrome c upregulation, and caspase-3 and caspase-9 activation were each ameliorated by EGCG pretreatment. Additionally, EGCG suppressed UV-induced phosphorylation of p38 and rescued UV-downregulated phosphorylation of ERK. Taken together, these results suggest that EGCG prevents UV irradiation-induced apoptosis in PC12 cells by scavenging ROS and inhibiting the mitochondrial pathways known to play a crucial role in apoptosis. In addition, EGCG inhibits UV-induced apoptosis via JNK inactivation and ERK activation in PC12 cells. Thus, EGCG represents a potential neuroprotective agent that could be applied to prevent neuronal cell death induced by UV irradiation.

• 농업과학연구
• /
• 제48권3호
• /
• pp.397-412
• /
• 2021

In Experiment 1, the impact of using diets sufficient in P on the performance of weaned piglet growth with or without a super dose of phytase was investigated. One hundred and twelve piglets were randomized into four treatments with 7 replicates (4 piglets·cage^-1). Bodyweight (BW), daily gain (ADG), daily intake (ADFI) and feed conversion ratios (FCR) were measured over three weeks. Treatments included a positive control (PC) with a Ca : P ratio of 0.80 : 0.50%. and the negative control (NC) had a Ca : P ratio of 0.60 : 0.50%. The PC plus phytase was denoted as PC+, and the NC with the phytase diet was designated as NC+. The PC diet was formulated to meet or exceed the NRC (2012) standards for pigs weighing 7 - 25 kgs. Better results were obtained with the PC diet (p > 0.1) compared to the NC diet. The super dose of phytase in the PC+ diet significantly improved the overall FCR (p < 0.1). For Experiment 2, the impact of different calcium (Ca)/phosphorous (P) ratios with or without supplementation of vitamin D₃ was determined. Ninety-six piglets were randomized into four treatments with 6 replicates (4 piglets·cage^-1). The PC, NC1 and NC2 diets had ratios of 0.80 : 0.50, 0.80 : 0.45, and 0.60 : 0.45%, respectively. The fourth diet (PCV) was the PC diet fortified with vitamin D₃. Improved results were observed with the PC diet (p > 0.1) compared to the NC diets. Supplementing dietary 25-OH-D₃ in the PCV diet led to numerically higher ADG and ADFI scores with lower FCR values at the early nursery stage (p = 0.0044), but the vitamin supplement did not significantly influence the growth.

• Korea-Australia Rheology Journal
• /
• 제17권1호
• /
• pp.1-7
• /
• 2005

Acrylonitrile-Butadiene-Styrene (ABS), polycarbonate (PC) and their alloys are an important class of engineering thermoplastics that are widely used for automotive industry, computer and equipment housings. For the process of recycling mixtures of ABS and PC, it is desirable to know how sensitive the blend properties are to changes in compositions. It was for this reason that blends of virgin ABS and virgin PC at five different compositions, namely, $15\%,\;30\%,\;50\%,\;70%$ and $85\%$ by weight of ABS were prepared and characterised by rheological and mechanical measurements. Rheological properties of these blends in steady, oscillatory and transient step shear and mechanical properties, namely, tensile strength, elongation-at-break and Izod impact strength are reported. The results show that PC behaves in a relatively Newtonian manner, but ABS exhibits significant shear thinning. The ABS-rich blends show a trend that is similar to that of ABS, while PC-rich blends, namely $0\%$ and $15\%$, exhibit a nearly Newtonian behaviour. However, at a fixed shear rate or frequency, the steady shear or the dynamic viscosity varied respectively in a non-mono-tonic manner with composition. Except for $15\%$ blend, the viscosities of other blends fall into a narrow band indicating a wide-operation window of varying blend ratio. The blends exhibited a lower viscosity than either of the two pure components. The other noticeable feature was that the blends at $70\%$ and $85\%$ ABS content had a higher G' than pure ABS, indicating an enhancement of elastic effect. The tensile yield strength of the blends followed the 'rule of mixtures' showing a decreasing value with the increase of ABS content in PC. However, the elongation-at-break and the impact strength did not appear to obey this 'rule of mixtures,' which suggests that morphology of the blends also plays a significant role in determining the properties. Indeed, scanning electron micrographs of the fracture surfaces of the different blends validate this hypothesis, and the $15\%$ blend is seen to have the most distinct morphology and correspondingly different behaviour and properties.

• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.35-38
• /
• 2012

In this study, we have attempted to characterize the photovoltaic effect in real-time measurement of photoinduced current in a poly-Si-based solar cell using photoconductive atomic force microscopy (PC-AFM). However, the high contact resistance that originates from the metal-semiconductor Schottky contact disturbs the current flow and makes it difficult to measure the photoinduced current. To solve this problem, a thin metallic film has been coated on the surface of the device, which successfully decreases the contact resistance. In the PC-AFM analysis, we used a metal-coated conducting cantilever tip as the top electrode of the solar cell and light from a halogen lamp was irradiated on the PC-AFM scanning region. As the light intensity becomes stronger, the current value increases up to $200{\mu}A$ at 80 W, as more electrons and hole carriers are generated because of the photovoltaic effect. The ratio of the conducting area at different conditions was calculated, and it showed a behavior similar to that generated by a photoinduced current. On analyzing the PC-AFM measurement results, we have verified the correlation between the light intensity and photoinduced current of the poly-Si-based solar cell in nanometer scale.

• International Journal of Concrete Structures and Materials
• /
• 제7권1호
• /
• pp.71-78
• /
• 2013

Prestressed concrete (PC) is the predominant material in highway bridge construction. The use of high-strength concrete has gained wide acceptance in the PC industry. The main target in the highway industry is to increase the durability and the life-span of bridges. Cracking of elements is one aspect which affects durability. Recently, nine 7.62 meter long PC I-beams made with different concrete strength were designed according to a simple, semi-empirical equation developed at the University of Houston (UH) (Laskar et al., ACI Journal 107(3): 330-339, 2010). The UH Method is a function of shear span-to-depth ratio (a/d), concrete strength $\sqrt{f^{\prime}_c}$, web area $b_wd$, and amount of transverse steel. Based on testing these girders, the shear cracking strength of girders with different concrete strength and different shear span-to-depth ratio was investigated and compared to the available approaches in current codes such as ACI 318-11 (2011) and AASHTO LRFD Specifications (2010).

• 한국세라믹학회지
• /
• 제45권6호
• /
• pp.336-344
• /
• 2008

Rheological properties of cement pastes containing blast furnace slag (BFS: 3,900, $7,910\;cm^2/g$) or fly ash powder (FA: 4,120, $8,100\;cm^2/g$) according to the ratio of water/binder (W/B) and the dosage of polycarboxylate type superplasticizer (PC) were investigated by a mini slump and a coaxial cylinder viscometer. In this experiment, the ratio of replacing OPC with BFS or FA was 30 wt%, the W/B was from 30 to 70 wt%. As a result, the fluidity of cement paste containing BFS or FA was improved with increasing W/B and the dosage of PC. BFS or FA replaced cement paste with W/B 70% and PC 0.3% showed the highest fluidity. The segregation range of cement paste was occurred below $10\;d/cm^2$ of the yield stress and below 50 cPs of the plastic viscosity by the coaxial cylinder viscometer. And also it was formed that the plastic viscosity and the yield stress of FA replaced cement paste were higher than them of BFS replaced cement paste.

• 한국지반공학회지:지반
• /
• 제12권5호
• /
• pp.117-126
• /
• 1996

표준관입시험은 시험절차의 간편성 등 많은 장점에도 불구하고 시험장비와 시험보조장치 및 시험관리 등에 따라 시험결과인 N치에는 여러가지 오차가 포함되는 시험으로 알려져 있다. 특히, 해머가 낙하할 때에 발생하는 에너지 손실 때문에 실제의 해머 타격에너지와 이론치는 크게 다르기 마련이다. 이 연구에서는 초음파 송수신장치와 PC를 이용하여 국내의 여러 현장에서 시행되고 있는 표준관입시험에서 해머타격에너지를 측정하여 이론치와 비교하였다. 연구결과 R-P해머와 자동해머의 해머에너지비는 이론치에 대하여 각각 64.2%및 75.0%로 측 정되었다. 측정결과에 동적효율 0.72를 적용하여 측정 N치를 보정할 수 있는 평균에너지비를 산출한 결과는 각각 46% 및 54%였다.