• Journal of the Korea Concrete Institute
• /
• v.25 no.3
• /
• pp.261-269
• /
• 2013

In this study, it was developed eco-friendly inorganic binding material concrete using ground granulated blast furnace slag and alkali activator (water glass, sodium hydroxides). Eight reinforced concrete beam using inoganic binding material concrete were constructed and tested under monotonic loading. The major variables were mixture ratio of alkali activator, type of admixture and admixture. Experimental programs were carried out to improve and evaluate the flexural performance of such test specimens, such as the load-displacement, the failure mode, the maximum load carrying capacity, and ductility capacity. All the specimens were modeled in scale-down size. The eco-friendly concrete using inorganic binding material encouraged alkali activation reaction was rapidly hardening speed and showed possibility as a high strength concrete. Also, the RC beams using new materials showed similar behavior and failed similarly with RC beam used portland cement. It is thought that eco-friendly inorganic binding material concrete can be used with construction material and product as a basic research to replace cement concrete. If there is application to structures in PC member as well as production of 2nd concrete product, it could be improved the productivity and reduction of construction duration etc.

• Journal of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.295-303
• /
• 1989

Tetradentate Schiff base cobalt(II) complex; Co(SND) and Co(SOPD) were synthesized, and these complexes were allowed to react with dry oxygen to form oxygen adducts cobalt(III) complexes such as $[Co(SND)(Py)]_2O_2$ and $[Co(SOPD)(Py)]_2O_2$ in pyridine. These complexes have been identified by IR specta, T.G.A., magnetic susceptibilities measurements and elemental analysis. It has been found that the oxygen adducts coblat(III) complexes have hexacoordinated octahedral configuration with tetradentate Schiff base cobalt(II), pyridine and oxygen, and the mole ratio of oxygen to cobalt(II) complexes are 1;2. The redox reaction processes of $Co(SND)(Py)_2$ and $Co(SOPD)(Py)_2$ complexes were investigated by cyclic voltammetry with glassy carbon electrode in 0.1M TEAP pyridine. The result of redox reaction processes of Co(III)/Co(II) and Co(II)/Co(I) for $Co(SND)(Py)_2$ and $Co(SOPD)(Py)_2$ complexes are reversible or quasi reversible process but oxygen adducts complexes are irreversible processes. Redox process for oxygen of oxygen adducts complexes was quasi reversible and redox range of potential was $E_{pc}\;=\;-0.96{\sim}-1.03V$ and $E_{pa}\;=\;-0.78{\sim}-0.80V.$

• Journal of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.542-554
• /
• 1987

Tetradentate schiff base cobalt(II) complexes; Co(SED), Co(SND) and Co(SOPD) have been prepared, these complexes have react with dry oxygen in DMSO to form oxygen adducts cobalt(III) complexes; $[Co(SED)(DMSO)]_2O_2,\;[Co(SND)(DMSO)]_2O_2$ and $[Co(SOPD)(DMSO)]_2O_2$. It seems to be that the oxygen adducts cobalt(Ⅲ) complexes have heexa coordinated octahedral configration with tetradentate schiff base cobalt (III), DMSO and oxygen, and the mole ratio of oxygen to cobalt(II) complexes are 1 : 2, these complexes have been identified by IR-Spectra, T.G.A., magnetic susceptibilitis and elemental analysis of C.H.N. and Cobalt. The redox reaction process of Co(SED), Co(SND) and Co(SOPD) complexes was investigated by cyclic voltammetry with glassy carbon electrode in 0.1M TEAP-DMSO. The results of redox reaction process of Co(II) / Co(III) and Co(II) / Co(I) for cobalt(SED) and cobalt(SOPD) complexes and Co(II) / Co(III) process for cobalt(SND) complex are reversible process but Co(II) / Co(I) process of Cobalt(SND) complex is irreversible, and oxygen adduct complexes to quasi reversibly with oxygen should be very closed related to the redox potentials of range, $E_{pc}$ = -0.80~-0.89V and $E_{pa}$ = -0.70~-0.76V.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.2
• /
• pp.153-159
• /
• 2010

Nowadays, Korean farmers rely more on chemical fertilizers than low input sustainable agriculture drawn from the farm itself. In order to improve soil nutritional imbalance for environment friendly agriculture in greenhouse, we have carried out a relationship between fertilizer application level, and soil chemical properties for strawberry cultivation at 56 sites in Chungnam Province. Average amount of nitrogen as basal fertilization was 92.3 Mg $ha^{-1}$ which higher 2.6 times compared to standard amount of basal fertilizer. In case of compost application more than 30 Mg $ha^{-1}$, excessive ratio compared to optimum level was higher 1.8 times for EC value, 3.0 times for available phosphate, 2.6 times for exchangeable potassium, 1.7 times for exchangeable calcium, and 1.6 times for exchangeable magnesium, respectively. Amounts of compost application significantly correlated with available phosphate (r=0.370, $p{\leq}0.01$), exchangeable potassium(r=0.429, $p{\leq}0.01$), exchangeable calcium(r=0.404, $p{\leq}0.01$), exchangeable magnesium(r=0.453, $p{\leq}0.01$), and exchangeable sodium(r=0.369, $p{\leq}0.01$), respectively. Our results suggest that soil nutrients management for sustainable agriculture was optimum fertilization based on soil testing for strawberry cultivation in greenhouse.

• Korean Journal of Poultry Science
• /
• v.41 no.2
• /
• pp.143-149
• /
• 2014

This study was conducted to investigate the effects of dietary supplementation of the mixture of probiotics (MP) on growth performance, size of small intestine, cecal microflora and ammonia concentrations in broiler chicks. A total of 700, one-day-old male broiler chicks were randomly allotted to four treatments with seven replications having 25 birds per pen. The birds were fed one of the four experimental diets; containing no antibiotics nor MP (negative control, NC), containing antibiotics without MP(positive control, PC), negative control with MP 0.1% and negative control with MP 0.2% for 5 weeks. During overall experiment, birds in PC and MP treatments had higher final BW and daily BW gains than birds in NC treatments; however, the significance was not identified. The feed conversion ratio of the chicks fed the diet containing MP was significantly improved as compared to those fed the NC diets. The weights of jejunum were increased by the MP (p<0.05), but weights of duodenum, ileum and length of small intestine were similar among the groups. Birds in PC treatment showed lower populations of total microbes and lactic acid bacteria than other groups (p<0.05), cecal ammonia concentrations of the chicks fed the diet containing MP were significantly decreased as compared to those of NC and PC (p<0.01). In conclusion, MP added to the broiler diets improved the feed conversion rate and reduced cecal ammonia concentration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2793-2800
• /
• 2011

The purpose of this research is to develop and optimize a lane departure warning application based on a smartphone which can be applicable as a new platform for various mobile information applications. Recently, a lane detection warning system which is a representative application among safe driving assistant solutions is being commercialized. Due to the necessity of powerful embedded hardware platform and its price, its market is still not growing. In this research, it is proposed to develop and optimize a lane departure warning application on iPhone 3GS. OpenCV is used for efficient image processing, and for lane detection a heuristic algorithm based on Hough Transform is proposed. The application was developed under Macintosh PC platform with Xcode 3.2.4 development tools, downloaded to the iPhone and has been tested on the real paved road. The experimental result has shown that the detection ratio of the straight lane was over 90% and the processing speed was 1.52fps. For the enhancement of the speed, a few optimization methods were introduced and the fastest speed was 3.84fps. Through the improvement of lane detection algorithm, additional optimization works and the adoption of a new powerful platform, it will be successfully commercialized on smartphone application market.

• Korean Journal of Occupational Health Nursing
• /
• v.4
• /
• pp.5-29
• /
• 1995

Occupational health services in Korea have been operated as dual types : one is operated by occupational health care manager and the other is health care agency without their own personnel. The performance of occupational health service should be different due to the variety of characteristics of health care manager and workplace, qualification of health care manager. This study is to analyze performance of occupational health care services with a particular consideration of job performance shape and efficiency, based on comparing those two types of health care management to show on the basic data for the settlement of more qualitative health care management system at workplace. For this study, total 391 places in Seoul and Inchon city area ; 154 places (39.4%) managed by designated health care manager and 237 places (60.6%) by the agency with their commission are selected as research samples. Tools for data collection are questionnares that have been investigated during the period of 20 September 1993-20 December 1993. Those data are compared with percentiles, mean, standard deviation and B/C ratio using SPSS PC program. Conclusions observed from the tests and each comparison could be summerized as follows : 1. Occupational health care have been accomplished at workplaces with designated people than with agencies people, and coverage rate of the occupational health care services has differences, due to management types. The reason of these results is due to visit only one or two times monthly by the agencies, while their own health care manager obsess, at the workplaces all the times. 2. Most of the expense for environmental control of all health care services expenditures shows that there is almost no fundamental improvement because more expenses are needed for procuring personal protective equipment and measuring work environment instead of environmental improvement. 3. It is investigated how much the cost of occupational health care services needs per worker, and calculated how much the cost needs per service hour per worker. The results from this show that the cost of occupational health services at workplaces with their own managers used less than the cost of health care agencies, eventually the former gives better services with less cost than the latter. 4. Benefit/Cost ratio is also produced by total benefit/total cost. The result from the above way reads 4.57 as a whole, while their own manager having workplaces reads 4.82 and the agencies do l.56. Even if their own manager performing workplaces spent more cost, this system produces more benefit than the agencies management. 5. The B/C ratio for medical organization such as local clinic, health care center and pharmacy shows more than or equal to at the workplaces controlled by the agencies. It is inferred that benefit would be much less than the cost used, with so being inefficient. 6. It is assumed that the efficiency ratio of health education is equal to reduction rate of workers medical organization visit. Estimated reduction rate 5%, 10%, 15%, show that the efficiency ratio of health education have an effect on producing benefits. It is estimated that more benefit can be produced if more qualitative education will be provided for enhancing health care efficiency. 7. Results of this study cannot be generalized because there are large scale of deviation in case of workplaces with less than 300 full time workers, but B/C ratio reads 2.69 as a whole and 3.25 at workplaces with their own health care manager are higher than 1.63 at the workplaces manged by the agencies. Finally, all the benefit concerning health care services could not be quantified, measured and shown on the value of money. This is a reason that a considerable part of benefits are so underestimated. This is also thought that measurement tools should be developed for measuring benefits of health care services with a comprehensive quantification. in the future. It is also expected that efficiency of occupational health care services should be investigated using cost-effectiveness analysis.

• International Journal of Automotive Technology
• /
• v.6 no.2
• /
• pp.107-117
• /
• 2005

A distributed hardware-in-the-loop simulation (HILS) platform is developed for designing an automotive engine control system. The HILS equipment consists of a widely used PC and commercial-off-the-shelf (COTS) I/O boards instead of a powerful computing system and custom-made I/O boards. The distributed structure of the HILS system supplements the lack of computing power. These features make the HILS equipment more cost-effective and flexible. The HILS uses an automatic code generation extension, REAL-TIME WORKSHOP$^{ (RTW$^{) of MATLAB$^{ tool-chain and RT-LAB$^{, which enables distributed simulation as well as the detection and generation of digital event between simulation time steps. The mean value engine model, which is used in control design phase, is imported into this HILS. The engine model is supplemented with some I/O subsystems and I/O boards to interface actual input and output signals in real-time. The I/O subsystems are designed to imitate real sensor signals with high fidelity as well as to convert the raw data of the I/O boards to the appropriate forms for proper interfaces. A lot of attention is paid to the generation of a precise crank/ earn signal which has the problem of quantization in a conventional fixed time step simulation. The detection of injection! command signal which occurs between simulation time steps are also successfully compensated. In order to prove the feasibility of the proposed environment, a simple PI controller for an air-to-fuel ratio (AFR) control is used. The proposed HILS environment and I/O systems are shown to be an efficient tool to develop various control functions and to validate the software and hardware of the engine control system.

• Korean Journal of Health Education and Promotion
• /
• v.18 no.3
• /
• pp.37-58
• /
• 2001

This study placed its objectives in suggesting the basic data for setting up an approach to protect the educational environment, by analyzing the relevance between the misconducts of adolescence and the harmful environment around the school, as an object of study, middle school students and high school students all over the country. Thus, this study carried out the questionnaire survey, by the multi-stage of stratified sampling in 2,114 middle school and high school students from June 29, 2000 through July 29, 2000. And the results of analysis were as follows: 1. In case of the ratio of students using harmful environment, the electronic game room had the highest ratio (78.3％); next, the PC room (75.6％), the singing room (71.6％), and the cartoon room (34.3％). 2. In terms of the experiences of using the harmful environment according to the personal characteristics, high school students used it in a higher ratio, compared with middle school students (p〈0.001); the students, whose father graduated from a high school, comparatively used it much more(p〈0.05). Also, when a school is located near to amusement quarters or shopping centers, students used the harmful environment most highly (p〈0.001). And the differences were found to be statistically significant. 3. In case of the perceived susceptibility factors, the harmful environment was found to be used in lower ratio, by the students who answered “very so” to the question item, The more harmful environment facilities are positioned around school, the more student have the opportunities to use them. (p〈0.001). That is, the findings showed that the higher students' degree of perceived susceptibility factors was the less students used harmful environment facilities. The differences were statistically significant. In terms of the ratio of using harmful environment according to perceived seriousness factors, it was founded out that the students, who answered, “If I use any harmful environment facilities, it will be very harmful to myself.”. had the less opportunities of having used them, compared with the students who did not answer so (p〈0.001). This indicated that the higher the degrees perceived seriousness of students, the less they used harmful environment facilities. And the differences were statistically significant. In the side of the ratio of using harmful environment according to the perceived barriers, it was found out that there were any special large differences. That is, perceived barriers had nothing to do with students' using harmful environment. 4. As the result of having analyzed the factors influencing the behaviors of using harmful environment, the factor to explain the behaviors of using harmful environment was found to be the degree of perceived seriousness, among individual perceiving factors; next, the location of a school - one of personal characteristics, the degree of perceived susceptibility and ages, m sequence. 5. Among students' misconduct experiences, drinking was highest (21.6％), next, smoking (11.9％), drug abuse (4.3％), and sexual relations (1.6％), In sequence. Among other problematic behaviors, excessive waste was highest (14.6％); next, disobedience and lie (10.7％), night wandering (7.8％), and bad dressing and making-up (5.5％), in sequence. 6. In terms of the misconducts according to the behaviors of using harmful environment, compared with the students who did not commit any misconducts, harmful environment facilities were used more highly, by each group of students who experienced drinking (p〈0.00l), smoking (p〈0.001), sexual relations (p〈0.05), excessive waste (p〈0.001), disobedience ＆ lie (p〈0.001), and bad dressing ＆ making-up (p〈0.05). And the differences were statistically significant.

• Journal of Biomedical Engineering Research
• /
• v.25 no.3
• /
• pp.165-169
• /
• 2004

In Magnetic Resonance Electrical Impedance Tomography (MREIT), we inject current through electrodes placed on the surface of a subject and measure the induced magnetic flux density distribution using an MRI scanner. This requires a constant current source whose output pulses are synchronized with MR pulse sequences. In this paper, we present a design and performance analysis of a current source used in a 3.0T MREIT system. The developed current source was tested using a saline phantom. We found that its performance is satisfactory for the current MREIT system. We suggest future improvements for better SNR(signal-to-noise ratio).