• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.4
• /
• pp.424-431
• /
• 1996

This study was carried out to provide information for establishing counter measures of soil pollution through analysis of Cd. Cu, Pb, and Zn in paddy soils and brown rice. Cadmium, Cu, Pb, and Zn contents in soils were analyzed and distribution maps for these heavy metals were prepared. Heavy metal contents in brown rice were also measured. Average contents of Cd, Cu, Pb, and Zn in surface paddy soils extracted with 0.1 N HCl were 7.4, 35.8, 98.9, and $118.8mg\;kg^{-1}$, respectively. These were 9 times (Cu) to 50 times (Cd) higher than the background level of heavy metals in unpolluted paddy soils in Korea. The contents of Pb and Zn were lower than those measured in 1980, whereas Cd content did not decrease. The levels of heavy metal contamination in paddy soils may not affect growth or yield of rice plant, however, Cd contents indicated a level of serious concern to humans. The average contents of Cd, Cu, Pb, and Zn in brown rice were 0.38, 2.38, 1.31 and $22.31mg\;kg^{-1}$, respectively.

• Journal of Environmental Impact Assessment
• /
• v.29 no.4
• /
• pp.252-271
• /
• 2020

In this study, we investigated physical and chemical properties such as grain size, heavy metal pollution, magnetic properties, and their environmental impacts of road dusts (RD) collected from 14 sampling points in Daebul industrial Complex. Heavy metal concentrations in RD were in the order of Fe>Zn>Cu>Pb>Cr>Ni>As>Cd>Hg, and this pollution pattern was related to major industries and traffic activities in this area. The results of the correlation analysis between heavy metal elements and particle size in RD showed that Fe and all of analyzed heavy metals had a significant correlation with each other and metal concentrations had a significantly negative correlation (p<0.05). However, due to the input of large metal particles some heavy metal concentrations in the particle fraction of >1000 ㎛ were highest. Pollution load per unit area of this fraction was the highest among the grain size fractions. Cr, Ni, Cu, Zn, Cd, Pb levels in RD decreased and the levels of Cr, Ni, Cu, Zn, Cd, and Pb were reduced to 85 (As) -22 (Ni)% of the whole after removal of MFs fraction from RD. The mean heavy metal levels in the study area did not exceed the soil contamination guide value of Korea, indicating that heavy metal levels in RD were not a concern. However, at some sampling points, Zn concentrations were exceeded the soil contamination guide value for the 3rd areas of Korea and this result indicated that further studies of the impact of RD on the surrounding environment through re-suspension or non-point pollution, and of effective management methods are required.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.3
• /
• pp.279-292
• /
• 2015

New occurrences of large-scaled Zn-Pb deposits are recently found in the Danjang-myeon, Milyang. They are skarn-type deposits which replaced the intercalated limestone beds in the Jeonggaksan Formation. This study aims at characterizing occurrences, mineralogy, and chemistry of Zn-Pb ores and skarn minerals. Skarn orebodies are mainly found in 3 areas, named Gukjeon-ri, Gorye-ri, and Gucheon-ri orebodies, where sphalerite found as main ore mineral in 200-300 m in height and amount of galena increases as altitude does. Ores are dark grey to dark green in color and closely related with clinopyroxene zone. They occur with hedenbergite, grossular, actinolite, epidote, and small amounts of axinite, calcite, and quartz. Main ore mineral is sphalerite which includes tiny spotted grains of galena and chalcopyrite and becomes rich in grade in association with clinopyroxene and epidote. FeS contents in sphalerite show relatively wide range between 1.53 and 23.07 mole%, whose contents intend to increase towards biotite granite known as ore-related igneous rocks. CdS contents are in the range of 0.22-0.93 mole%, showing decrease tendency from southwest (Gukjeon-ri) to northeast (Gucheon-ri). Zn-Pb deposits developed in Danjang-myeon reveal decrease in temperature with increase of altitude, leading to gradual changes in compositions of ore and skarn minerals.

• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.101-109
• /
• 2010

The objective of this study is to investigate the characteristics of natural indigo dyeing of cotton fabric. Reduction and dyeing were carried out by one-step process using an infrared dyeing machine at the liquor ratio of 1:100, and subsequently oxidation and washing in water were followed. Dye uptake was increased with the increase of indigo concentration. Over the full range of dyeing tests, the dyeing condition was optimized to $40^{\circ}C$ for 40min. For most of dye concentrations, the cotton fabrics showed mainly PB color. Maximum K/S value was shown at 4g/L of sodium hydrosulfite concentration and the color strength increased with the increase of dye concentration. Value(lightness) decreased with the increase of dye uptake irrespective of mercerization or reduction method, while the mercerized cotton showed two times higher dye uptake than the untreated cotton. Whereas hue of the untreated cotton showed large decrease of P character(5.6~3.5 PB) with the increase of dye uptake, that of the mercerized cotton increased P character(4.7~5.5 PB). Irrespective of mercerization, value and chroma decreased with the increased of dye uptake. In addition, the untreated showed lower chroma than the mercerized cotton. In the case of traditional reduction, hue of the untreated cotton was changed very little with the increase of dye uptake. For hydrosulfite reduction, P character decreased with the increase of dye uptake. The difference of hue value was small with the change of reduction method(hydrosulfite reduction or traditional fermentation). Color character was not influenced by the changed maximum absorption wavelength. Washing fastness showed 4~4/5 shade change rating without any staining. And dry rubbing fastness was good at low color strength. The bacterial reduction ratios of dyed cotton fabric were also increased.

• Economic and Environmental Geology
• /
• v.27 no.3
• /
• pp.219-229
• /
• 1994

The Sangra Pb-Zn deposit is located in the Gampo area. Most Cretaceous sedimentary rocks and Paleogene felsic intrusives in the study area have experienced intense propylitization. Such propylitization and Pb-Zn mineralization in ore veins are involved with the fluid having very low oxygen isotopic composition.Sulfurisotopic equilibrium temperature during the main Pb-Zn mineralization (late stage I) is calculated as $T=275^{\circ}{\sim}295^{\circ}C$. Oxygen and sulfur fugacity in late stage I fluid is estimated as $logfO_2=-34.4{\sim}-29.1$ and $logfS_2=-12.0{\sim}-8.2$ bars. It is inferred that the sulfur isotopic composition oflate stage I fluid was very high such as ${\delta}^{34}S_{{\Sigma}S}=+22.4{\sim}+22.5$‰ and the origin of sulfur was ocean water sulfate. Oxygen and hydrogen isotopic composition of water in ore-forming fluid was gradually increased and more abundantly affected by ocean water from early to late mineralization stage as follows; (late stage I) ${\delta}^{18}O_{H2O}=-7.2{\sim}-1.1$‰, ${\delta}D_{H2O}=-87{\sim}-84$‰, (stage II) ${\delta}^{18}O_{H2O}=-2.4{\sim}-0.8$‰, ${\delta}D_{H2O}=-39{\sim}-21$‰ (stage III) ${\delta}^{18}O_{H2O}=+0.7{\sim}+12.6$‰, ${\delta}D_{H_2O}=-49{\sim}-42$‰. The pH in ore-forming fluid was about 4.7 during late stage I and is thought to have been gradually decreased from late stage I to stage II mineralization.

• Journal of Environmental Impact Assessment
• /
• v.22 no.5
• /
• pp.481-489
• /
• 2013

There are U.S. troops with a force about 290,000 strong stationed all around the world, approximately 150 countries. Among the troops, USFK has performed principal part with its stationing for 50 years against the military threat of North Korea. However, as a result of an investigation made into environmental contamination of several bases which were restituted from US to ROK by the Land Partnership Plan in the process of relocation of USFK, it was found that the area was contaminated by not only TPH and BTEX caused by diesel fuel and JP-8 but also various heavy metal over the standard level according to the operations of corps. Among these bases, 4 corps, each of which has different duties and function, were chosen to be analyzed for the characteristics and degrees of soil contamination. Fisrt of all, in armored camp the soil was contaminated by TPH and heavy metal (Zn, Ni, Pb) due to the repairing activities of tracked vehicles and shooting exercises. In army aviation camp, the soil was contaminated by TPH, BTEX and heavy metal (Zn, Cd) due to repairing activities of aircrafts. Also, in engineer camp there was contaminated area polluted by TPH and heavy metal (Zn, Pb) caused by open-air storage of various construction materials and TPH, BTEX and heavy metal (Zn, Pb, Cu) contamination of aircraft shooting area in shooting range camp were detected. Managing environment will be more effective when we identify the contaminative characteristics and take necessary measures in advance.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.6
• /
• pp.12-21
• /
• 2017

A pot experiment was conducted to investigate the transfer of As and cationic heavy metals (Fe, Mn, Zn, Cd and Pb) from soil to rice plant in soil condition with submerged and drained. During the ninety-day monitoring period for soil solution, solubility of reducible elements such as As, Fe and Mn in submerged condition were higher than that of Zn. On the contrary, concentration of Zn in drained condition was higher than that of reducible elements. The concentration of As, Cd, Pb and Zn in rice plant (root, stem, leaf and grain) showed similar pattern with soil solution. The As concentration in each part of rice plant, which cultivated in drained condition, measured 56%~94% lower than those in submerged condition. However, the contents of cationic heavy metals (Cd, Pb and Zn) were represented the opposite result with As. These results are due to mobility of As and cationic heavy metals under different soil drainage conditions which represent oxidation and reduction. Thus soil drainage control can be used as acceptable passive treatment methods to reduce transfer of inorganic contaminants from soil to rice plant. However more detailed examination on soil condition conversion is needed, because yield of rice was decreased when it cultivated in drained condition only. It also needed when soil is contaminated by As and cationic heavy metal because single drainage condition cannot reduce transfer of both kinds of contaminants all.

• Analytical Science and Technology
• /
• v.22 no.4
• /
• pp.293-301
• /
• 2009

As a basic research for development of the domestic field-portable XRF spectrometer, we discussed the analytical results of bench-top ED-XRF and field-portable XRF method for polluted heavy metals such as Cr, As, Se, Hg, Pb, Cd in soil samples. To obtain the best performance of the XRF spectrometer, the instrumental parameters of X-ray tube-voltage and measurement time were optimized for 6 heavy-metal elements in soil using certified reference material. The quantitative analysis of Cr, As, Se, Hg, Pb, Cd concentration in certified reference materials and soil samples were compared by empirical method and fundamental parameter method.

• Environmental Engineering Research
• /
• v.25 no.2
• /
• pp.258-265
• /
• 2020

Heavy metal removal by using porous mineral adsorbents bears a great potential to decontaminate sludge compost, and natural zeolite (NZ), artificial zeolite (AZ), and expanded perlite (EP) seem to be possible candidates for this purpose. A composting experiment was conducted to compare the efficiency of those adsorbents for removal of iron (Fe), manganese (Mn), chromium (Cr), copper (Cu), zinc (Zn), nickel (Ni), and lead (Pb) from sewage sludge compost with no adsorbent amendment. For this purpose, 10 g of NZ and AZ and 5 g of EP was filled in a small bag made from non-biodegradable synthetic textile and was separately mixed in composting piles. The bags were separated from compost samples at the end of the experiment. AZ and NZ exhibited different reduction potentials depending on the type of heavy metal. AZ significantly reduced Cr (43.7%), Mn (35.8%), and Fe (29.9%), while NZ more efficiently reduced Cu (24.5%), Ni (22.2%), Zn (22.1%), and Pb (21.2%). The removal efficiency of EP was smaller than both AZ and NZ. The results of this simultaneous composting and metal removing study suggest that AZ and NZ can efficiently bind metal during composting process.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.2
• /
• pp.33-40
• /
• 2017

In typical remediation practices, separate washing systems have to be applied to clean up the soils contaminated with both oil and heavy metals. In this study, we evaluated the efficiency of successive two-stage soil washing in removal of mixed-contaminants from soil matrix. Two-stage soil washing experiments were conducted using different combinations of chemical agent: 1) persulfate oxidation, followed by organic acid washing, and 2) Fenton oxidation, followed by inorganic acid washing. Persulfate oxidation-organic acid washing efficiently removed both organic and inorganic contaminants to meet the regulatory soil quality standard. The average removal rates of total petroleum hydrocarbons (TPH), Cu, Pb, and Zn were 88.9%, 82.2%, 77.5%, and 66.3% respectively, (S/L 1:10, reaction time 1 h, persulfate 0.5 M, persulfate:activator 3:1, citric acid 2 M). Fenton oxidation-inorganic acid washing also gave satisfactory performances to give 89%, 80.9%, 87.1%, and 67.7% removal of TPH, Cu, Pb, and Zn, respectively (S/L 1:10, reaction time 1 hr, hydrogen peroxide 0.3 M, hydrogen peroxide:activator 5:1, inorganic acid 1 M).