• 산업공학
• /
• 제11권1호
• /
• pp.119-129
• /
• 1998

The relative importance of Logistics in steelworks industry is rather higher among other business activities. The objective of the paper is to propose the methodology for real-time vehicle scheduling for scrap disposal in the steelworks industry. Currently, the rule necessary to assign vehicles to a specific job is strictly fixed. The paper adopts the multi-pass rule selector (MPRS) that suggests a promising rule used for vehicle dispatching for a period of time. The MPRS is regularly invoked if necessary and then evaluates a set of rule candidates to select the best rule with respect to the system performance criteria. The experiment shows that the proposed approach outperforms the current single-pass strategy.

• 소성∙가공
• /
• 제8권2호
• /
• pp.169-177
• /
• 1999

Different pass strains and rolling temperatures were applied to understand the effects of pass strain and rolling temperature on flow stress and flow strain of AA5083 alloy. The specimens were prepared by conventional casting process followed by hot rolling. Hot torsion tests were conducted at temperature ranges of 350 to 52$0^{\circ}C$ under a strain rate of 1.0/sec. During the process, hot-restoration mechanisms, dynamic recovery(DRV) or dynamic recrystallization (DRX), of the AA5083 alloy were analyzed from the flow curves and deformed microstructures. It was found that while the rolling strain per pass and rolling temperature have little effect on the folw stress, they have significant effect on the failure strain. The DRV was responsible for the hot restoration mechanism of the hot-rolled specimen. heavily elongated grains and small subgrains containing dislocations were obtaned during the hot deformation. This was due to the presence of Al6Mn precipitate in the alloy.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1984년도 춘계학술발표회논문집
• /
• pp.25-28
• /
• 1984

This paper describes the design of band-pass filter using the dielectric resonator and microstrip line depends mainly upon the magnetic field and is principal parameter as band-pass filter. Because dielectric resonator band~pass filter has a very high-Q, the bandwidth of this filter is very narrow. as a result of experiment, the dielectric resonator bandwidth of this filter is very narrow. As a result of experiment, the dielectric resonator band-pase filter has various modes central frequencies due to the mode change and good characteristric as a band-pass filter.

• 한국광학회지
• /
• 제13권6호
• /
• pp.515-520
• /
• 2002

광학 반사경에서 일어나는 입사광과 반사광의 광로정변화와 분위기변화와의 관계를 조사했다. 분위기 변화요소로는 기압, 온도, 습도 그리고 $CO_2$함유량 등을 예로 들었다. 이들의 변화에 따른 광로정 변화치의 측정기법을 개발하여 실험 결과로부터 광로정 변화치를 정량화할 수 있음을 보였으며. 습도변화가 광로정의 변화에 가장 큰 영향을 미친다는 것을 확인하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.801-812
• /
• 2009

Recently, the cooperation between railway operators has been increased to maximize the efficiency of Asian railway network and international tourists, especially tourists to Asian region grow rapidly. But the cooperation in the rail tourism and leisure field has not yet been promoted. Therefore, this study suggests the development strategy of Asian Rail Pass like Eurail and InetRail Pass. It discusses mainly three Northeast Asian countries, Korea, China and Japan, which are very important area as the third world trade market and high rate of personal exchange. A joint research has to be conducted to feel out the practicability and profitability for the development of Asian Rail Pass. This study will publicize the necessity of Rail Pass in Asia.

• International Journal of Contents
• /
• 제11권3호
• /
• pp.63-68
• /
• 2015

A novel unit cell for a high pass filter was designed based on a composite right/left-handed structure that uses a folded coplanar waveguide. The equivalent circuit model for the unit cell was extracted from the geometry of the unit cell, and the effect of each main parameter of the unit cell was analyzed. The equations to calculate the immittance values of the equivalent circuit elements were formulated, and moreover, the dispersion characteristics and energy the distributions of the electromagnetic fields were simulated to determine the characteristics of the composite right/left-handed structure. Finally, the high pass filters were implemented as a series of the proposed unit cells. We show that the experimental results were in good agreement with those obtained from the simulation. Thus, the high pass filter was found to achieve a baseband insertion loss of 3 dB and a stopband attenuation of 70 dB.

• 동굴
• /
• 제88호
• /
• pp.45-50
• /
• 2008

It is rapidly increasing number using Hi-pass system passing through tollgate on the high way. However disabled people and man of merit have been excepted existing advantage of discount when they are using Hi-Pass. It is difficult to make a check an advantage when they are in a vehicle for using Hi-pass system technology in present. For solving this problem, we have fabricated virtual Hi-pass system combined fingerprint identification system (FIS) by AVR and fingerprint identification USB. We checked the chance of efficiency and utility in this system for getting a solution of conservative problem. And, it will be also used for entrance ticketing and transferring of cave tourism and so on.

• 대한기계학회논문집B
• /
• 제26권9호
• /
• pp.1249-1259
• /
• 2002

The present study investigates the convective heat/mass transfer inside a cooling passage of rotating gas-turbine blades. The rotating duct has various configurations made of ribs with 70。 attack angle, which are attached on leading and trailing surfaces. A naphthalene sublimation technique is employed to determine detailed local heat transfer coefficients using the heat and mass transfer analogy. The present experiments employ two-surface heating conditions in the rotating duct because the surfaces, exposed to hot gas stream, are pressure and suction side surfaces in the middle passages of an actual gas-turbine blade. In the stationary conditions, the parallel rib arrangement presents higher heat/mass transfer characteristics in the first pass, however, these characteristics disappear in the second pass due to the turning effects. In the rotating conditions, the cross rib present less heat/mass transfer discrepancy between the leading and the trailing surfaces in the first pass. In the second pass, the heat/mass transfer characteristics are much more complex due to the combined effects of the angled ribs, the sharp fuming and the rotation.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 하계학술발표대회 논문집 제19권 1호
• /
• pp.291-294
• /
• 2000

가속 주행하는 차량의 소음을 줄이기 위해서는 각 소음원의 기여도를 파악하는 것이 필요하다. 본 논문에서는, 가속 주행하는 차량의 배기 토출 소음을 ISO362에서 규정한 음압 측정 지점에서 예측하기 위하여, 시간 영역에서 근접장 배기 토출 소음을 예측할 수 있는 시뮬레이션 프로그램 'WAVE'와 움직이는 음원의 방사 모델을 이용하였다. 가속 주행중 차량의 소음원에 의한 음파의 전달은 도플러효과와 시간 지연이 발생하며, 이를 고려하여 정지된 지점에서의 소음레벨을 예측하였으며, 배기 토출 소음의 예측을 통하여 가속주행소음에 대한 기여도와 그 소음 특성을 파악할 수 있다.

• 소성∙가공
• /
• 제24권4호
• /
• pp.234-240
• /
• 2015

Multi-pass shape drawing is very important to produce steel profiles in round samples. In the current study, a process design system is developed for a multi-pass shape drawing. In general, the number of passes for a multi-pass shape drawing is 2 to 3 when the reduction ratio, drawing stress, and productivity are considered. Therefore, calculating the drawing stress and designing the intermediated die shapes are very important. In order to calculate the drawing stress, a shape drawing load prediction method is proposed using a general axisymmetric drawing load prediction model. An intermediate die shape design method is proposed using the initial and the final product shapes. Based on this analysis, a process design system is developed for multi-pass shape drawing for steel profiles. The system works with AutoCAD. The system was applied to design a shape drawing of a spline.