• 한국세라믹학회지
• /
• 제37권6호
• /
• pp.545-551
• /
• 2000

Sintering behaviors of the glass-alumina composites for low firing temperature were investigated as a function of the particle size of glass frit. The system of glass frit was Pb-B-Si-Al-O. The median particle sizes of the glass frits were 2.72$\mu\textrm{m}$, 2.67$\mu\textrm{m}$ and 1.33$\mu\textrm{m}$, which were prepared with changing ball-milling times as 24 h, 48 h and 96 h. The glass-alumina composites showed maximum density at certain temperature, and further heating led to dedensification behaviors, so called over-firing. The sintering temperature, which showed maximum density, raised from 425$^{\circ}C$ to 475$^{\circ}C$ with increase of particle size of glass frit from 1.33$\mu\textrm{m}$ to 2.72$\mu\textrm{m}$. Especially, the over firing behaviors, which were occurred at high sintering temperatures, were greatly increased with decrease of particle size of glass frit.

• Journal of Pharmaceutical Investigation
• /
• 제17권1호
• /
• pp.41-46
• /
• 1987

Oil in water microemulsion containing soybean oil and egg phosphatide was prepared by vacuum high shear mixing and high pressure homogenizing. The laser particle sizer, Coulter counter and photomicroscope were used to determine the particle size distribution at each cycle of homogenizing. Particularly, the laser particle sizer(dynamic light scattering method) was applied to the study of particle size distribution behavior below $1\;{\mu}m$. It was found that the particle size distribution below $1\;{\mu}m$ was shifted to lower size range as the number of passing cycle was increased. Beyond the 7th cycle, however, the particle size distribution was not varied.

• 지질공학
• /
• 제32권2호
• /
• pp.241-255
• /
• 2022

본 연구에서는 예천지역의 화강풍화토에 대하여 KS F 2302의 체 분석 방법과 규정에 준하여 체분석 시험을 수행하고, 물 세척시 발생되는 흙의 입자분리와 입도분포 변화의 특성을 비교 분석하였다. 광학현미경에 의한 영상이미지 분석결과 흙입자가 물에 의해 더 작은 입자로 분리됨을 확인하였고 입도분포곡선의 변화를 5가지 지표값으로 산출한 결과 세립분(0.075 mm)의 증가량은 13.67%, 임의 입경(0.25 mm)의 증가량은 19.44%, 입도분포곡선의 최대통과율폭(B_M)은 #30 체에서 21.08%가 증가되었고 입도분포곡선의 이동면적(A)은 69.28%·mm로 분석되었으며 평균입경(D₅₀)은 0.663 mm가 감소되었다. 이러한 결과는 물 세척을 수행하는 것이 세립토의 함량이 실제보다 과소평가 되는 것을 막을 수 있는 효과적인 방법임을 의미한다.

• 한국입자에어로졸학회지
• /
• 제8권1호
• /
• pp.9-15
• /
• 2012

Three different commercial particle counters were used to measure the PM2.5 particles in this study. An Aerosol Spectrometer (AS) 1.109 model of Grimm and a Particle Sensor (PS) 3030 model of HCT were compared with an Aerodynamic Particle Sizer (APS) 3321 model of TSI. The responses of these instruments were compared for four sizes ($1.0{\mu}m$, $1.5{\mu}m$, $2.0{\mu}m$ and $2.5{\mu}m$) of polystyrene latex (PSL) particles and indoor air particles of the office room. The mode diameter, particle size distribution and total particle number concentration of PSL particles were measured by each instrument. In the office room, the total particle number concentration was measured for 25 minutes. In results of particle size distribution and mode diameter, the APS 3321 (52 size-channels) was more accurate than the AS 1.109 (31 size-channels) and PS-3030 (10-szie channels) since the APS has more number of size-channels than the other instruments. However, AS 1.109 and PS-3030 provided similar results of total particle number concentration to those from the APS 3321. In results of office room test, there were no significant difference from each instrument similar to results of PSL test.

• 한국지반공학회논문집
• /
• 제28권12호
• /
• pp.77-86
• /
• 2012

본 연구에서는 개별요소법을 적용하여 화강암 기원의 풍화토에서 입자 크기와 입자크기 분포 특성 중 최대입경/최소입경의 비가 강도정수에 미치는 영향을 살펴보았다. 입자크기와 입도분포가 변화할 때의 전단강도 특성 변화를 규명하기 위하여 개별요소법 수치해석을 실시하였다. 점착력이 0.25MPa, 내부마찰각이 $29^{\circ}$인 강도특성을 갖는 기준시료를 수치해석적으로 구현한 후, 간극률을 기준시료와 동일하게 유지하면서 입자의 크기와 입도분포를 바꾸어 가며 점착력과 내부마찰각의 변화를 살펴보았다. 수치해석결과 평균입자의 크기가 커질수록 점착력의 현저한 감소가 관찰되었으며, 내부마찰각의 변화는 미미하지만 증가하는 경향을 보였다. 이러한 연구결과는 입도만을 이용하여 간편하게 화강풍화토의 강도정수 산정 시 활용될 수 있을 것으로 판단된다. 특히 풍화상태가 점이적으로 변화하는 화강풍화토의 경우, 현장시험과 실내시험을 통하여 일부 구간에서 측정된 입도-강도 자료가 있을 때, 이러한 시험들이 수행되지 않은 구간에 대해서도 입도분포를 통해 간편하게 강도특성을 규명할 수 있을 것으로 여겨진다.

• Elastomers and Composites
• /
• 제43권4호
• /
• pp.230-240
• /
• 2008

분산중합법에 의해 무기물을 포함하는 고분자 미립자를 합성하기 위해 styrene과 n-butyl methacrylate가 알루미나와 함께 중합되었다. Styrene과 n-butylmethacrylate의 무게 비는 3:1이었고, 입자안정제는 poly(N-vinyl pyrrolidon), 중합 개시제로는 2,2'-azobis(isobutyronitrile)를 사용하여 개시제의 농도, 분산매의 종류, 분산매의 혼합 용해도 상수 (${\delta}_{mix}$), 커플링제의 종류와 농도에 따른 입자경을 조사하였다. 개시제의 농도가 증가함에 따라 입자경이 소폭 상승하였고 분산매의 극성이 증가할수록 입경이 증가하였고, 분산매로서, 이소프로판올과 이온교환수를 조성비에 따라 사용한 경우, $[{\delta}_{mix}]^{-4.01}\;{\propto}$ 평균 입자경과 $[{\delta]_{mix}]^{-0.83}\;{\propto}$ 입경 분포의 관계를 얻을 수 있었다. 커플링제의 종류와 농도변화에 따른 입자경 및 입자경 분포는 뚜렷한 차이가 없었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권3호
• /
• pp.420-427
• /
• 2015

It is necessary to understand the cellular uptake and cytotoxicity of food-grade delivery systems, such as ${\beta}$-lactoglobulin (${\beta}$-lg) nanoparticles, for the application of bioactive compounds to functional foods. The objectives of this study were to investigate the relationships between the physicochemical properties of ${\beta}$-lg nanoparticles, such as particle size and zeta-potential value, and their cellular uptakes and cytotoxicity in Caco-2 cells. Physicochemical properties of ${\beta}$-lg nanoparticles were evaluated using particle size analyzer. Flow cytometry and confocal laser scanning microscopy were used to investigate cellular uptake and cytotoxicity of ${\beta}$-lg nanoparticles. The ${\beta}$-lg nanoparticles with various particle sizes (98 to 192 nm) and zeta-potential values (-14.8 to -17.6 mV) were successfully formed. A decrease in heating temperature from $70^{\circ}C$ to $60^{\circ}C$ resulted in a decrease in the particle size and an increase in the zeta-potential value of ${\beta}$-lg nanoparticles. Non-cytotoxicity was observed in Caco-2 cells treated with ${\beta}$-lg nanoparticles. There was an increase in cellular uptake of ${\beta}$-lg nanoparticles with a decrease in particle size and an increase in zeta-potential value. Cellular uptake ${\beta}$-lg nanoparticles was negatively correlated with particle size and positively correlated with zeta-potential value. Therefore, these results suggest that the particle size and zeta-potential value of ${\beta}$-lg nanoparticles play an important role in the cellular uptake. The ${\beta}$-lg nanoparticles can be used as a delivery system in foods due to its high cellular uptake and non-cytotoxicity.

• 한국수소및신에너지학회논문집
• /
• 제19권4호
• /
• pp.305-312
• /
• 2008

ZnO/Zn redox cycle is the one of the promising thermochemical cycles for hydrogen production via water splitting with high temperature heat source like a concentrated solar energy. This paper reports the particle size effect of Zinc on water splitting behavior. Water splitting reaction experiments were carried out at isothermal conditions of 350 and 400$^{\circ}C$ in TGA (Thermo Gravimetric Analyzer) using four commercial Zinc powders (nano, <10 ${\mu}m$, <150 ${\mu}m$ and $150{\sim}600\;{\mu}m$ particle sizes). Before the experiments, average particle size of Zinc powders was analyzed by PSA (Particle Size Analysis). After the experiments, XRD (X-Ray Diffraction) and SEM (Scanning Electron Microscope) analyses were conducted on the samples. The experimental results showed that particle size had a effect on the conversion of Zinc to ZnO. Zinc conversion was increased, as the particle size decreased. Especially, the nano size particles were aggregated and the particle's morphology changed on the surface during hydrolysis reaction.

• 한국식생활문화학회지
• /
• 제33권6호
• /
• pp.588-596
• /
• 2018

In this study, dry-milled rice flour from different varieties (Samgwang, Boranchan, Hanareum, Dasan, Hangaru) and different particle sizes were used to manufacture Jeung-pyun and the quality characteristics were analyzed. The Jeung-pyun produced from Samgwang, Dasan and Hangaru milled rice flour showed highly dense pores. The Jeung-pyun produced from Hanareum only showed a significant difference according to the particle size. Samgwang, Boranchan and Dasan varieties with a particle size of 150 m showed a significant decrease in volume (p<0.05). Samgwang showed the lowest pH at all particle sizes (p<0.05). The sweetness of Samgwang varieties was the highest at $3.27-3.63^{\circ}Brix$ (p<0.05). The hardness of Jeung-pyun increased with increasing particle size (p<0.05). The highest acceptance of Jeung-pyun in terms of volume and bitter taste was observed with Hanareum at a particle size of 50 m. When the particle size was 50 m, the overall acceptance was highest for Jeung-pyun made from Samgwang followed by Hanareum. The acceptance of all the sensory characteristics was high when the particle size of rice flour was 50 m. When the appearance of Jeung-pyun was measured, Samgwang showed a dense structure and low hardness. Hanareum showed an increasing volume and springiness. Overall Samgwang and Hanareum were found to be the most suitable varieties for the production of Jeung-pyun.

• 한국대기환경학회지
• /
• 제16권2호
• /
• pp.165-178
• /
• 2000

In this study the effects of block distance have been investigated on the particle deposition efficiency in the collecting cell of two-stage electrostatic precipitator by numerical analysis. Particle trajectories have been changed by the electrostatic and inertial force of particle with the inlet velocity electrostatic number and particle diameter. The total deposition efficiency has a minimum value by the interaction between the effect of particle inertial force and electrostatic force in the collecting cell. The increase of block distance makes the total deposition efficiency decrease under the range of the particle size which has the minimum deposition efficiency. However beyond the range of particle size which has minimum deposition efficiency total deposition efficiency has no trend with the variation of block distance.