• 대한정형도수물리치료학회지
• /
• 제16권2호
• /
• pp.76-81
• /
• 2010

Purpose: This study examined how the degrees of muscle activity of Rectus Femoris and Tibialis Anterior during the four phases of walking vary according to three different treadmill slopes of $0^0$, $7^0$, and $15^0$. Methods: Subjects were 14 randomly selected healthy students attending G University in Seoul, Korea who had never had articular problems with lower limb and had no difficulties walking at the time of study. Results: 1) With respect to Rectus Femoris, in every phase of both forward and backward walking, there were significant differences among all of the slope degrees (p <.05), while the activity increased with increased slope degrees in every phase of backward walking. 2) For Tibialis Anterior, only in P2 and P3 of both forward and backward walking there were significant differences in every slope (p <.05). Conclusion: Both Rectus Femoris and Tibialis Anterior were found to be more active during backward walking compared to backward walking. In addition, the activity degree of Rectus Femoris was high between the early part of two foot support phase and the early part of one foot support phase, whereas that of Tibialis Anterior was high between the early part of one foot support phase and the latter part of both foot support phase.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1139-1146
• /
• 2009

Collapse of cut slope includes many uncertainties in view of the reason and time. So, in the past, risky cut slopes have been dealt after they've been collapsed through post-management measures. But recently, advanced disaster prevention system is required, and as a part of that RTMS(Real-Time Monitoring System) was developed. In this study, stability of risky cut slope was evaluated by site investigation. To grasp deformation behavior characteristics of slope, numerical analysis based on FEM was performed and using results of that, specific standards for installation of Real-Time Monitoring System were suggested.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.223-228
• /
• 2000

The current slope stability analysis of a filldam is based on the limit equilibrium method, and in calculation of safety factor during earthquake, adopts the seismic intensity method in which it considers a uniform seismic force from dam foundation to crest. However the observed behaviour of filldam during earthquake shows some different behaviour in that at the crest the measured acceleration is usually several times the ground acceleration. In this study, slope stability calculations of a filldam are provided based on the modified seismic intensity method, which can take into account the amplification phenomena of acceleration in the upper part of dam. And also the results of calculations are compared with that of current seismic intensity method.

• Geomechanics and Engineering
• /
• 제16권5호
• /
• pp.513-525
• /
• 2018

Slope stability of sensitive clayey soils is particularly important when subjected to strength loss and deformation. Except for progressive failure, for most sensitive and insensitive slopes, it is important to review the feasibility of conventional analysis methods based on peak strength since peak strength governs slope stability before yielding. In this study, as a part of efforts to understand the behavior of sensitive clay slopes, a total of 12 centrifuge tests were performed for artificially sensitive and insensitive clay slopes using San Francisco Bay Mud (PI = 50) and Yolo Loam (PI = 10). In terms of slope stability, the results were analyzed using the updated instability factor ($N_I$). $N_I$ using equivalent unit weight to cause a failure is in reasonable agreement shown in the Taylor's chart ($N_I$ ~ 5.5). In terms of dynamic deformation, it is shown that two-way sliding is a more accurate approach than conventional one-way sliding. Two-way sliding may relate to diffused shear surfaces. The outcome of this study is contributable to analyzing stability and deformation of steep sensitive clay slopes.

• 한국환경복원기술학회지
• /
• 제1권1호
• /
• pp.95-101
• /
• 1998

In order to seek a efficiency of site cooperation and slope stabilization in a rock sloping work, it would rather take into consideration, in its importance, a concurrent performance of civil works and landscaping works than give any part a special priority. It can enable us to achieve an expanded scope of landscaping works and improvement of slope scenery via this sort of cooperation. However, this can not be achieved without assurance on the slope stabilization and scenic view of the project owner, and further via this cooperation, environmentally familiar works can be performed, becoming natural environment and minimizing damages on surrounding scenery and environment. It is foreseeable that improvement of functions of civil equipment, introduction of technology and development of landscaping materials can facilitate an improvement in the betterment of slope scenery. Landscaping related parties need to enhance their understanding of rock sloping and scenic view based on knowledge on the fundermental understanding of slope stabilization and on the base rock characteristics.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.434-443
• /
• 2009

Slope stability analysis is an essential part of rock slope design. For highly fractured rock, the limit equilibrium method (LEM) based slope stability analysis with a circular failure surface is often carried out assuming the rock mass behaves more or less as a continuum. This paper examines first, the applicability of the finite-element method (FEM) based shear strength reduction (SSR) technique for highly fractured rock slope, and second the use of Mohr-Coulomb (MC) failure criterion in conjunction with generalized Hoek-Brown (HB) failure criterion. The numerical results on a number of cases are compared in terms of the factor of safety (FS). The results indicated that the FEM-based SSR technique yields almost the same FSs from LEM, and that the MC and HB failure criteria yield almost identical FSs when the strength parameters for MC failure criterion are obtained based on the modified HB failure criterion if and only if value of the Hoek-Brown constant $m_i$ is smaller than 10 and slope angle is smaller than 1:1, otherwise MC failure criteria over-estimate the factor of safety.

• 한국유체기계학회 논문집
• /
• 제14권1호
• /
• pp.18-23
• /
• 2011

The hydraulic part in reactor coolant pump consists of suction nozzle, impeller, diffuser, and discharge nozzle. Among them, impeller is required to be designed to satisfy performance requirements such as head, NPSHR, and head curve slope at design point. Present study is intended to suggest the preliminary design method sizing the impeller size to satisfy the design requirement particularly including head curve slope at design point. On a basis of preliminary design result, hydraulic components have been designed in detail by CFD and then manufactured in a reduced scale. Experiment in parallel with computational analysis has been executed in order to confirm the hydraulic performance. Comparison results show good agreement with design result, confirming the validity of design method suggested in this study.

• 한국터널지하공간학회 논문집
• /
• 제12권2호
• /
• pp.157-164
• /
• 2010

최근 아치슬래브를 이용한 새로운 반개착식 터널공법이 터널안정성 확보와 건설비용 감소, 환경훼손 최소화를 위해 적용되고 있다. 반개착식 공법은 원지반을 터널 천단아치부 까지만 굴착하고 아치형 구조물을 설치하여 복토한 후에 터널하반을 굴착하는 공법이다. 본 논문에서는 편경사 지역에서 반개착식으로 굴착 할 경우 편경사에 따른 아치슬래브의 거동을 실내모형실험으로 규명하였다. 연구결과, 아치슬래브의 거동은 원지반의 편경사 크기, 굴착심도, 굴착사면의 경사 및 기반암의 위치에 영향을 받는 것으로 나타났다. 아치슬래브의 측력은 전반적으로 압축력이 지배하나 편경사가 커질수록, 저지대에서 부분적으로 인장력이 발생하였다. 아치슬래브의 모멘트는 편경사가 증가할수록 고지대에서는 압축모멘트가 발생하며, 저지대에서는 인장모멘트가 발생하였다. 지점반력은 편경사가 커질수록 고지대에서는 증가하며, 저지대에서는 감소하여 좌우편차가 발생하였다.

• 한국지반신소재학회논문집
• /
• 제12권3호
• /
• pp.65-73
• /
• 2013

본 연구에서는 대도시사면 통합관리시스템 구축을 위하여 부산 장산 지역의 절개사면에 대한 현황을 조사하였다. 절개사면에 대한 특징들을 기록할 수 있는 조사용 사면 조사용 시트를 작성하였으며, 조사시트에는 사면정보를 체계적으로 기재할 수 있도록 하였다. 부산 장산 일대의 절개사면은 총 69개소로서 대부분이 옹벽과 사면으로 이루어진 사면(CR)이다. 절개사면에 인접하고 있는 시설물로는 주거시설이 46개소, 학교가 12개소로 조사되었다. 그리고 절개사면의 평균 연장길이는 50m에서 150m로 분포하고, 높이는 10m에서 20m로 분포한며, 토층과 암반층이 혼재된 혼합사면이 가장 많이 분포하고 있다. 사면의 안정성 확보를 위하여 대부분 사면하단부에 옹벽이 설치되어 있으며, 옹벽 및 절개사면의 추가적인 안정성을 확보하기 위하여 앵커공, 배수공, 낙석방지공, 숏크리트공, 식생공 등이 보강되어 있음을 알 수 있다.

• Smart Structures and Systems
• /
• 제9권5호
• /
• pp.393-410
• /
• 2012

Conventional geotechnical instrumentation techniques available for monitoring of slopes, especially soil-nailed slopes have limitations such as electromagnetic interference, low accuracy, poor longterm reliability and difficulty in mounting a series of strain sensors on a soil nail bar with a small-diameter. This paper presents a slope monitoring system based on fibre Bragg grating (FBG) sensing technology. This monitoring system is designed to perform long-term monitoring of slope movements, strains along soil nails, and other slope reinforcement elements. All these FBG sensors are fabricated and calibrated in laboratory and a trial of this monitoring system has been successfully conducted on a roadside slope in Hong Kong. As part of the slope stability improvement works, soil nails and a toe support soldier-pile wall were constructed. During the slope works, more than 100 FBG sensors were installed on a soil nail, a soldier pile, and an in- place inclinometer. The paper presents the layout and arrangement of the instruments as well as the installation procedures adopted. Monitoring data have been collected since March 2008. This trial has demonstrated the great potential of the optical fibre monitoring system for long-term monitoring of slope performance. The advantages of the slope monitoring system and experience gained in the field implementation are also discussed in the paper.