• Title/Summary/Keyword: PAPR

Search Result 323, Processing Time 0.019 seconds

An Asynchronous UWB Positioning Scheme with Low Complexity and Low Power Consumption (낮은 복잡도와 전력 소모의 비동기식 UWB 무선측위 기법)

  • Kim, Jae-Woon;Park, Young-Jin;Lee, Soon-Woo;Shin, Yo-An
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.34 no.11C
    • /
    • pp.1098-1105
    • /
    • 2009
  • In this paper, we propose an asynchronous UWB (Ultra Wide Band) Positioning scheme that can provide precise positioning performance with low complexity and low power consumption. We also present the residual test to improve the positioning performance in multipath channels having heavy NLoS (Non-Line of Sight) components. As compared to conventional ToA (Time of Arrival) positioning scheme that requires round-trip transmissions as many as the number of beacons, the proposed UWB positioning scheme effectively decrease power consumption and processing delay since a single round-trip transmission is only required. Also, as compared to conventional TDoA (Time Difference of Arrival) positioning scheme requiring precise synchronization among the beacons, asynchronous nature of the proposed scheme achieves very low system complexity. Through simulations in LoS (Line of Sight) channel models, we observe that the proposed scheme requires low system complexity, low power consumption, while providing positioning performance of almost the same accuracy as the conventional ToA and TDoA positioning schemes. In addition, the proposed scheme by employing the residual test achieves accurate positioning performance even in multipath channels having heavy NLoS components.

BS-PLC(Both Side-Packet Loss Concealment) for CELP Coder (CELP 부호화기를 위한 양방향 패킷 손실 은닉 알고리즘)

  • Lee In-Sung;Hwang Jeong-Joon;Jeong Gyu-Hyeok
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.42 no.12
    • /
    • pp.127-134
    • /
    • 2005
  • Lost packet robustness is an most important quality measure for voice over IP networks(VoIP). Recovery of the lost packet from the received information is crucial to realize this robustness. So, this paper proposes the lost packet recovery method from the received information for real-time communication for CELP coder. The proposed BS-PLC (Both Side Packet Loss Concealment) based WSOLA(Waveform Shift OverLab Add) allow the lost packet to be recovered from both the 'previous' and 'next' good packet as the LP parameter and the excitation signal are respectively recovered. The burst of packet loss is modeled by Gilbert model. The proposed scheme is applied to G.729 most used in VoIP and is evaluated through the SNR(signal to noise) and the MOS(Mean Opinion Score) test. As a simulation result, The proposed scheme provide 0.3 higher in Mean Opinion Score and 2 dB higher in terms of SNR than an error concealment procedure in the decoder of G.729 at $20\%$ average packet loss rate.

High-Efficiency CMOS Power Amplifier using Low-Loss PCB Balun with Second Harmonic Impedance Matching (2차 고조파 정합 네트워크를 포함하는 저손실 PCB 발룬을 이용한 고효율 CMOS 전력증폭기)

  • Kim, Hyungyu;Lim, Wonseob;Kang, Hyunuk;Lee, Wooseok;Oh, Sungjae;Oh, Hansik;Yang, Youngoo
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.30 no.2
    • /
    • pp.104-110
    • /
    • 2019
  • In this paper, a complementary metal oxide semiconductor(CMOS) power amplifier(PA) integrated circuit operating in the 900 MHz band for long-term evolution(LTE) communication systems is presented. The output matching network based on a transformer was implemented on a printed circuit board for low loss. Simultaneously, to achieve high efficiency of the PA, the second harmonic impedances are controlled. The CMOS PA was fabricated using a $0.18{\mu}m$ CMOS process and measured using an LTE uplink signal with a bandwidth of 10 MHz and peak to average power ratio of 7.2 dB for verification. The implemented CMOS PA module exhibits a power gain of 24.4 dB, power-added efficiency of 34.2%, and an adjacent channel leakage ratio of -30.1 dBc at an average output power level of 24.3 dBm.